Thanks for the beautiful video without unnecessary delays and boring sounds.

Cakeeep bagi2 pengalamannya ,biasanya org baik hati yg bagi ilmunya pada org lain mantuuuuuul

Hi my friend💯💖👍💫 Very Goooooood💫 I from in IRAN ... 🤝 Iran and India are brothers. I would love to come to India and see the caressing people. Insha'Allah Because you, like us, worked hard for the freedom of your country. Good luck, dear engineer

Great job! Thanks for sharing!

Good job

واقعا اموزش کاربردی خیلی خیلی متشکرم موفق باشید

Thank you for not playing crappy music. I enjoyed the video.

Excelente trabajo, Saludos, Exitos.

A wonderful job done 👍

@LahisTechLT

5 жыл бұрын

Thanks

When the pressure arm is from the side, the drill bit slips to the left while drilling. If you make the pressure arm from the middle of the rails above the engine, it works more easily.

@shashankparab

Жыл бұрын

Agree. also the drawer rails usually have some play. Better to mount them vertically perpendicular (one in the front and other one to left or right), than in parallel to each other to reduce that play.

very good but in my opinion i just put a softer spring and made some lateral reinforcements in the column because i think it bends a little when you pull the lever

@piczelbytes

4 жыл бұрын

Drill machine and angle grinder with a single 775 motor 😮😲!!! Please watch our channel for the video 😊

Bellissimo lavoro. Complimenti

Wow what a talent I like it

@LahisTechLT

5 жыл бұрын

Thanks

This press has worked like a charm for my projects kzread.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

Thanks a lot, a very good job

Supper!

Ewww its all oily LOL! You really made me take notice at 2:40 i thought FOUR motors ! This should be interesting. 😂😂 Not exactly the kind of engineering i remember on my fitters course with the RAF

Nice little drill press.

Very good. Keep it up. Congratulations.

Amazing job! I alredy subscribe to your channel 👍🍻😊

На 20:30 отчетливо видно уход оси сверления с вертикали при надавливании на рычаг. Так сказать люфт есть. А если бы шариковые направляющие разместить на некотором удалении друг от друга, например 50-60 мм, то, вероятно, люфт бы исчез. Или рычаг сделать другим, двойным, чтоб нагрузка была на обе стороны. Но в целом, можно и так оставить, все равно там все комплектующие сами по себе не являются точными.

@user-jr3qd5ex9n

4 жыл бұрын

Это приговор тонким свёрлам!!! Поверьте,я много перепробовал подобных изделий,лучшим точно (не ради рекламы) является станочек с канала Иван Ключ kzread.info/dash/bejne/hW2k27lmeLOrorQ.html Не ломает хрупкие тонкие свёрла,а делается не сложнее этого.

Hello good video Just suggested to place the spring laterally, it could be two for greater balance, near the support column. This would give you more room for the pieces to drill.

Nice Tutorial....

Excellent project!!

Nice & very good your idea really a briliant

🙏🙏🎩🎩🤗 excelente ideas te felicito ☺️

joss tenant om...

Hola amigo un saludo desde Venezuela. Me gusta mucho el vídeo y también la herramienta es muy buena y bastante funcional. Yo quisiera elaborar está herramienta pero los respuesto aquí en mi país son muy costosos.

Excelente

Great job!!!

@LahisTechLT

5 жыл бұрын

Sergey Grebennikov Thanks.

فني ومبدع شكرا

Awesome machine Sir...

Nice job

Great job! Congratulations! By the way, is that FOR SALE? Keep posting more videos. I enjoy all of them!

Thank you

Really interesting ur Ideas..

@ummehaisam3697

3 жыл бұрын

Machine bahut acchi Badhai lekin last Mein Tum Jo connection lete hain vah connection Nahin batate Mota Kis Tarah chalu karna hai vah bhi Aakhir Mein pura Bata dijiye Bata dijiye to samajh mein aaega Varna Nahin Chhoti motor Hai direct connection se jald Hi Shakti Hai usko kya battery Lagate Hain Kaisa karte hain yah batana

@luisvelasco1741

3 жыл бұрын

@@ummehaisam3697 muy buen tra muy buen trabajo cuanto cuesta vale la pena. Comprarlo

Super nice no cost.

cara vc é o cara essa sim ficou top até eu vou tentar fazer uma muito bom vc tá de parabéns Léo xavier Vitória es Brasil.

Gracias Amigo ya lo recibí y muchas gracias .

Buenas, disculpa,me podrias informar de donde se sacan esos motores,gracias y saludos.

Very interesting

Super great

It would be better with a reducer to lower the RPM and increase strength. It is seen that due to the construction it is not very precise but I imagine that for home jobs it will work.

bhut mast banaya bhai.

yukarı-aşağı hareket mekanizmasını güncelleyerek üste alırsanız (motor aksı ve rayların orta noktasına mümkün olduğunca yakın), delme işlemi hem rahat olacaktır, hemde mekanizmayı kasma oranı azalacaktır.

Legal cara. Onde posso adquirir o kit completo.

A rough job but it seems to work in the light duty applications shown. I can't see the wooden pillar staying firmly attached to the base for long.

@LahisTechLT

4 жыл бұрын

Yeah, I made this particularly for PCB drilling. (light applications)

super wow!

Very nice mate!

Ola amigo onde encontro este kit para montar a furadeira de bancada

brilliant. best one ive seen,

احسنت تسلم يدك استاذ

Best👍

Máy khoan bàn tuyệt quá 👍👍

Nice vedio bro

nice work

Wonderful

Good work

Excelente proyecto.

Excellent I'm very appreciated and interested 👌👌 but you have to add LED bulb drill point for light incase of night work

super bro

very nice my friend

Nice video 👍

Put the handle on the top of it to improve the precision, so he don’t “flex” when you push on it👌🏼

@LahisTechLT

5 жыл бұрын

Thanks

@kuniokikai2756

3 жыл бұрын

very dangerous

@robertolocaso4708

3 жыл бұрын

@@LahisTechLT quanto costa?

Bravo احسنت🏗🏗🏗🏗🏗🏗🏗🏗

Nice project

@LahisTechLT

5 жыл бұрын

Edmorbus Thanks

FELICITARI .AVETI O MANA DE AUR .EXCELENT .

🤩 show 👏👏👏👏

Very nice

Super 👌

OU ON PEUT COMMENDER LE KIT ET CHEZ QUI MERCI TRES BELLE REALISATION

Nice buddy

Which brand cordless drill u had used in this video

So many materials needed.

Just a hobbyist, unprofessional☝👍👌

superb .

@LahisTechLT

4 жыл бұрын

Thank you

spring alag jagah Laga raha hy isko donon stillain ke bich mein lagana chahie

How can I find material like you to make?

Nice build, but I suspect the motor's bearings are for tangential loads rather than axial ones. Lowering the rpm with a belt/pulley system would increase the torque and remove the axial load

Donde consigo esos motores

Nice

Ola amigo one enconto este kit para montar a furadeira de bancada

Very good

@LahisTechLT

4 жыл бұрын

thank you

I need more precicion

interesante, pero visualmente se puede ver que existe una desviación al presionar y eso hace que la broca se caliente, y distorsione la forma cilindrica del la perforación, mi propuesta en usar dos rieles en la base de la columna pero en los laterales para corregir.

@LahisTechLT

5 жыл бұрын

Gracias por su sugerencia.

power amp ?

👌👌

wow

Why you using wood match for shrinking tube. Are dont have gas match

Bro What Is The Power Supply Here Used Can We Purchase From Market??????

I want to buy it!!!

Muito bem gostei 👍

Молодец чувак..

The ebay link for Motor Speed Controller is for 12-40 volt, not for 0-40 volt. Will the 12-40 volt work as expected with the 12 volt 775 motor?

@anoopsinghsaksh

4 жыл бұрын

You can buy motor from this amazon link www.amazon.in/Solocell-Built-Passion-RS-775-Torque/dp/B07X1RXND7/ref=as_li_ss_tl?keywords=solocell&qid=1571820238&sr=8-25&linkCode=ll1&tag=pronounceserv-21&linkId=71407297b396d3148a00046a678fbb19&language=en_IN

👌👌👌 Is it possible to get it from you

كم سعر هذا المتور ومن وين اجيبه

Can i get this synopsis report because we are gone a make similar projects so please provide

Ooowww a new project I may do i need one of these i don't want to buy one.

Bro linear rail ,how much bro and where we want to buy

Ola serve para fura pedra