How to make a Door Latch with locking system

Тәжірибелік нұсқаулар және стиль

More amazing tips you can find at @Totally Handy Shorts

Пікірлер: 1 761

  • Edward Bashaw
    Edward Bashaw16 күн бұрын

    Somewhere the “Lockpicking Lawyer” is laughing….”am I a joke to you”?

  • Peter Wan

    Peter Wan

    Сағат бұрын

    When they have decided to make the lock with steel they have forgot about the fundamentals of lock safety which is that you can sneak in to the locking mechanism from the hinge.

  • KantramaGaming

    KantramaGaming

    4 сағат бұрын

    Exactly

  • Uncle Joe

    Uncle Joe

    2 күн бұрын

    LPL crew in the house

  • silver kangaroo

    silver kangaroo

    2 күн бұрын

    Yes

  • Josiah Patson

    Josiah Patson

    4 күн бұрын

    Like all you have to do is spin the nuts one at a time until the rod goes one step closer to open, take anyone less than 30 seconds to open

  • OrionPax44
    OrionPax449 күн бұрын

    Nice build. Just look for the weld spots to crack the code.

  • Dathu Boyini

    Dathu Boyini

    3 күн бұрын

    ❤️

  • Walter White

    Walter White

    3 күн бұрын

    @Pratik Kawade FR, I bet a raccoon could crack this lock if you used it to lock up garbage, seriously.

  • Pratik Kawade

    Pratik Kawade

    4 күн бұрын

    @Turgor Pressure you don't even need to have numbers on them to solve it. Its very simple, Just spin them one by one until they start sliding. I know this would be easier to understand if you all could touch it. Even a child can crack it. It's more of a puzzle for 5 year olds rather than a lock.

  • Brian Llamas

    Brian Llamas

    5 күн бұрын

    You know, normally I hate these, but this one was kind of cool

  • Turgor Pressure

    Turgor Pressure

    5 күн бұрын

    Tbh he grinded them down, but you would easily be able to feel it catch into the cut cylinder.

  • rollersky
    rollersky3 күн бұрын

    A good door handle made to look like a lock as far as I can tell. Very nicely done

  • Skeleton bones
    Skeleton bones8 күн бұрын

    You could make a really long one with a hidden compartment inside to hide stuff important to you.. like instead of hiding a key under the mat outside put this on a wall for emergencies or make it into a puzzle with symbols instead of numbers and make a riddle and sell them online as puzzles :D

  • Ian Rodrigo González
    Ian Rodrigo González12 күн бұрын

    Not sure if you ever heard of a lathe or a milling machine but they’re great 😂

  • Scott Morgan

    Scott Morgan

    Күн бұрын

    @John Smith show me the kind of lock for less than $25 that is available to everyone that does what this one does.

  • metatech

    metatech

    Күн бұрын

    So is Home Depot.

  • John Smith

    John Smith

    Күн бұрын

    @Scott Morgan yeah you could buy a lock for less than $25, without the tools, welder, and material cost and without wasting all that time

  • Atman Gotango

    Atman Gotango

    Күн бұрын

    @Scott Morgan I really need to get a welder. I build and repair a bunch of stuff but still I have no welder....pretty much stuck soldering and braising. Unless I want to fire up the foundry and go full liquid

  • Mon Dude

    Mon Dude

    4 күн бұрын

    He actually does have a lathe though

  • SK Suppressor
    SK Suppressor4 күн бұрын

    This man really CNC and lathe with an angle grinder...... Props 👍🏻

  • Abhishek Godbole
    Abhishek Godbole3 күн бұрын

    When you realise that cutting the locker off is easier than actually trying to open the lock😂

  • SusbaruSTI
    SusbaruSTI9 күн бұрын

    Definitely more of a “look what i can do” and not a “heres a neat way to make something good”

  • Walter White

    Walter White

    2 күн бұрын

    @Jerry it was neat, good though, IDK about that

  • Jerry

    Jerry

    2 күн бұрын

    But it was a neat way to make something good 😕

  • blinker fluid

    blinker fluid

    2 күн бұрын

    yeah lol and it’s not even remarkable is the funny part

  • Corey Macgregor
    Corey Macgregor18 сағат бұрын

    I bet you I can open it in less than 15 seconds without knowing the combo. It's like those cheap bike locks. So easy to feel the combo

  • SHIRLEY GIBSON
    SHIRLEY GIBSON6 күн бұрын

    It looks like fun. Almost anyone can make it. Love it

  • Michael Russo
    Michael RussoКүн бұрын

    You have some serious skills.. If you made this just to show people, you can make a lock for the fun of it.. I can imagine the stuff that you do for work and the cool stuff around your house. I'm subbed and gonna check out your channel for some other videos that I'm sure I will like. That was cool man! I like to see what people's imaginations can come up with. Plus, I'm a Lock Guy so this was interesting to watch.. Keep doing what you're doing my man. Awesome stuff.. 👍👍👍

  • ChaosMinecraft
    ChaosMinecraft6 күн бұрын

    May i ask what cutting techniques you used for the Welding part?

  • Ari Animations
    Ari Animations9 күн бұрын

    ignoring all the problems of this being a effective lock it’s a super cool build for something like a tree house or puzzle box where “cracking” the combination would be really satisfying

  • Wa ge
    Wa ge13 күн бұрын

    Holy shit you’re kidding me. Even the wet bandits can get through this

  • Ayub Makda

    Ayub Makda

    Күн бұрын

    If you know, you KNOW!! 😄😄😄

  • mj31382

    mj31382

    2 күн бұрын

    I just break the wood

  • MR Dhakir

    MR Dhakir

    4 күн бұрын

    Wwwwwoooooowwwww

  • BxTCHACKER

    BxTCHACKER

    5 күн бұрын

    Wet bandits))

  • 1RatDub

    1RatDub

    7 күн бұрын

    💀

  • Newberry 2010
    Newberry 20105 күн бұрын

    Yes we all have metal cutting, and sauteing tools just laying around. I think it would be much cheaper to just buy an actual lock that actually works.

  • techneeek
    techneeek2 күн бұрын

    How do the ones with the pin spin and also go deep enough to sit in the channel you cut out? Wouldn't they not be able to move since they would hit when you try to spin them? Or am I missing something? I don't see enough play/size difference for them to fall into the cut... like if the nut inside diameter is alot smaller than the rod? Smells fishy

  • Jesse Clark
    Jesse Clark7 күн бұрын

    I like seeing these types of videos with some one that obviously has skill in welding and fabrication

  • Herculydia
    Herculydia7 күн бұрын

    Absolutely the easiest lock to pick. Slight pressure to release and rotate the tumblers till they all edge in. 8 yr old could do it.

  • Mustapha Khial
    Mustapha Khial11 күн бұрын

    Just hold the lock to the opening direction, move the first number and it ll move a bit, do the same with the rest, and you are done

  • taturak

    taturak

    6 күн бұрын

    nope.

  • Altamiro Bike
    Altamiro Bike6 күн бұрын

    Parabéns pela ideia genial

  • Mirzojon Ergashev
    Mirzojon Ergashev8 күн бұрын

    Очень надёжно 🙌 тем более сейф из дерева

  • Andrew Mccoy
    Andrew Mccoy2 күн бұрын

    That's pretty cool. Child proof . Looked good .good video!

  • Campbell Donohoe
    Campbell Donohoe6 күн бұрын

    Considering its a 3 code lock all you've got to do is apply tension to the bolt and spin the nuts until it naturally sets the code

  • Revilolp
    Revilolp3 күн бұрын

    Dude I am impressed, amazing craftsmanship

  • uhチュンチュンマル
    uhチュンチュンマル2 күн бұрын

    That looks so easy to feel for the groove and unlock it

  • YEGUENIAN Antranik
    YEGUENIAN Antranik3 күн бұрын

    Unbelievably AWESOME. AMAZING.

  • neto rodrigues da silva
    neto rodrigues da silva21 сағат бұрын

    Muito bom Mas para achar o número do segredo, fica muito fácil.

  • Admiral Pavel Nakhimov
    Admiral Pavel Nakhimov15 күн бұрын

    Pretty cool, although should probably make the handle so it doesn't just stick out like that. Other than that, I liked this

  • UP Tercero
    UP Tercero8 күн бұрын

    Algo complejo, pero Genial! 👍🏻

  • Axolotl 563
    Axolotl 5637 күн бұрын

    Wouldn't the bolts just fall into place by spinning them around 1 rotation?

  • ABHISHEK GOUR
    ABHISHEK GOUR4 күн бұрын

    When your house lock is very strong. But your house is made up of mirror/glass😂😂🤣🤣

  • Connor McLeod
    Connor McLeodКүн бұрын

    Gotta admit, this was very ingenious

  • Илья Богумильчик
    Илья Богумильчик15 күн бұрын

    Правильно тут написали - открывается секунд за 5, если не торопиться. Поворачиваешь первую гайку до сдвига, потом вторую, потом третью. Чистая декорация ))) но прикольно

  • Artem Fedosov

    Artem Fedosov

    9 күн бұрын

    Мы же русские.

  • Александр Волков

    Александр Волков

    11 күн бұрын

    Не нужен подбор. Достаточно небольшого люфта (несколько микронов), а здесь он думаю огромный (до 1 мм, если не больше). Чувствительные ручки вам в помощь. И дело в шляпе!

  • Russ Ru

    Russ Ru

    11 күн бұрын

    Подобрать код возможно, используя зазор между гайками. Но учитывая интеллектуальный уровень современных тик-токеров- этот замок вполне себе, надёжный.

  • Георгий Губарев

    Георгий Губарев

    11 күн бұрын

    Никулин с фомкой на раз открыл бы... В 80-м году батя сварил гараж под мотик с коляской, и поставил по такому типу замок самодельный , но делал его не как здесь на коленке , а на фрезерном и токарном , шесть десятигранников , открыть никто не смог , даже я когда плохо ещё помнил код , замок имел небольшой ход 15 мм, освобождал колесо , вращая за ручку которое , выходили вертикальные ригели и открывалась дверь . Одно неудобно , постоянно старшие пацаны пытались подсмотреть ))) , зимой приносил с собой маленькую , со стакан размером , паяльную лампу ...

  • DaddyBeanDaddyBean
    DaddyBeanDaddyBeanКүн бұрын

    This might slow down tweakers looking for copper to steal, but if someone really wanted to get in there, this would take less than a minute to decode. At any rate, that's all I have for you today - if you enjoyed this video, please press Like, and if you'd like to see more like it, please subscribe, and as always, have a nice day.

  • Ashley & Grant
    Ashley & Grant8 күн бұрын

    What is the name of this machine that instantly welds?

  • Lazy Object
    Lazy Object6 күн бұрын

    Seriously this is so useful in my life

  • It's just me, chill.
    It's just me, chill.8 күн бұрын

    This is more of a neat homemade decoration piece than a functioning lock.

  • Aditya Muhammad
    Aditya Muhammad15 күн бұрын

    Mom can we have a lock? No son,we can make it

  • scottrich976

    scottrich976

    23 сағат бұрын

    All we need is a welder, some nuts and a metal bar and a smaaaallll obergene !

  • MAHIR

    MAHIR

    4 күн бұрын

    😂

  • ESSBrew

    ESSBrew

    6 күн бұрын

    BUHAHAHAHAHA

  • iduy chess

    iduy chess

    11 күн бұрын

    LOL

  • Ravel Adao
    Ravel Adao7 күн бұрын

    Gostei 👏👏👏♥️

  • Carlos mario De la cruz gonzalez
    Carlos mario De la cruz gonzalez8 күн бұрын

    Muy bueno,te felicito my friends

  • Devon Lockwood
    Devon Lockwood5 күн бұрын

    Very cool. Nice work with the angle grinder.

  • Анатолий Алексеевич
    Анатолий Алексеевич9 күн бұрын

    Хорошая вещь,сделаю себе.

  • Your Drummer
    Your Drummer14 күн бұрын

    Clever as hell and you're a master with an angle grinder. Now if we could just get you to weld the stuff right, it might actually work rather than break off after a few uses. If it's a novelty, good job!

  • Your Drummer

    Your Drummer

    12 күн бұрын

    @Little wigglemonster I mattered enough that you felt the need to respond, though. And that's good enough for me!😘

  • Little wigglemonster

    Little wigglemonster

    12 күн бұрын

    @Your Drummer it’s the internet you don’t matter here

  • Your Drummer

    Your Drummer

    12 күн бұрын

    @Dalton Leach my Tig certs. are Aluminum up to 1/2", Steel up to 1/2", and stainless steel up to 1/2" my other certs. Are Mig welding with the same metals and I have FCAW (flux core with shielding gas) up to 1" steel only. 95% of my welding is Aluminum Tig at my current job which I've been at for the last 18 years. But before that I worked at a shop that made custom hoses for many applications. (Like those braided metal hoses you see on hot rodded cars engines for example) but they didn't require any certs. To weld there though. I've welded Incolnel braided hoses for them on occasion for the industry that used them to transfer caustic liquids. (chlorine is what I think it was, but not sure). And one thing I could tell you, is if there's something in the weld other than the base metal, filler wire or gas, ( like a speck of grit or dust) those hoses would leak when tested. It was very frustrating on several occasions. Even the stainless steel hoses were difficult, but made the same way. The corrugated inner hose was about as thick soda can, then the braided wire armor outer, couplings and any connectors had to be welded solid and tested underwater for leaks regardless of base metal. I've also welded in several Machine shops across the U.S. The aerospace certification for where I'm at now Is so the employer could be ISO 9001 certified more than anything, but I did need to pass the tests to be Certified. We do weld stuff that goes on some aircraft so it's helpful, but its mostly to keep the Iso 9001 certification.

  • Dalton Leach

    Dalton Leach

    12 күн бұрын

    @Your Drummer Former welder here, so just curious, not asking this in spite. What are your tig certs? I imagine if you are in aerospace you weld a lot of aluminum and exotic metals as well like inconel.

  • Your Drummer

    Your Drummer

    12 күн бұрын

    It's true. I'm an actual welder.

  • Alex Rocha Rocha
    Alex Rocha Rocha6 күн бұрын

    Me gusto mucho y la voy hacer, gracias.

  • Lumpy
    Lumpy5 күн бұрын

    Yes, very handy. 😎🤌🏻

  • John L Shilling
    John L Shilling6 күн бұрын

    Unless your thieves are toddlers, this "lock" will only provide a 60 second delay.., if that. Placing a slight pressure towards "opening" - to the left, try turning the key-nuts. Only one will have a little resistance. Turn that one until you feel the resistance disappear. Repeat this step for each key-nut, feeling for that slight resistance. With practice, 10+ seconds...

  • 아킨토스
    아킨토스7 күн бұрын

    Wow this guy just invented the combination lock thing!

  • Everette Fountain
    Everette Fountain15 күн бұрын

    Simple yet a little effective.

  • Gigachad_Balls
    Gigachad_Balls8 күн бұрын

    Him: "Build your own lock!" The Lock: Masterlock: "You still want to make fun of us?" Me: "No, No I'll take 5 locks"

  • MG Burrito

    MG Burrito

    7 күн бұрын

    Its safe to say masterlock has a worthy competitor now

  • M. S.
    M. S.5 күн бұрын

    As a kid I build something like that from LEGO, it wasn't much less secure as rhis version.

  • Thibault Badri Anizon
    Thibault Badri Anizon8 күн бұрын

    Pretty clean work✊

  • ProCasualty
    ProCasualty3 күн бұрын

    That was impressive….. angle grinding lol

  • calvingreene90
    calvingreene9012 күн бұрын

    As good as a Master Lock.

  • Coffin Beard

    Coffin Beard

    11 күн бұрын

    🤣🤣🤣 so true

  • Supreme Magnetic
    Supreme MagneticКүн бұрын

    How to spend 5 hours making something that can be picked in 5 seconds. Looks cool tho 💪

  • willy castellanos
    willy castellanos5 күн бұрын

    Robbers: "Damn! The safe was locked we couldn't get the loot!" 🤣🤣🤣🤣🤣🤣🤣🤣

  • Kuya Wanseu
    Kuya Wanseu7 күн бұрын

    HIM: *Puts the lock into the wooden vault* IRON MACE: Let me introduce myself to you.

  • taturak
    taturak6 күн бұрын

    me after seeing this: proceeds to buy the tools to make a safe to safe my money. me after making the safe: "where's my money!?"

  • Руслан Сафаров
    Руслан Сафаров8 күн бұрын

    👏👏👏👏👏👏 не сразу понял как работает - подумав минуту сообразил 🙂

  • 3 күн бұрын

    Yeah all you need is: Solid steel rod (everyone has at least 5-6 of these just laying around) Welder Welding skills Grinder Fab experience Nuts Drill to mount Screws Mounting hardware All in all a whole day and like $500..... Sure dude whatever

  • Jon m
    Jon m2 күн бұрын

    I suspect you can open it without the combination just by feel.

  • Alex North
    Alex North3 күн бұрын

    Can you please send this to LPL? It would be hilarious to have him go into the technical on every issue with this

  • FAB1150
    FAB115010 күн бұрын

    Why do I always watch these, I know that I'm just gonna get angry

  • Kasual Steel

    Kasual Steel

    3 сағат бұрын

    @Jason G it was waste of time, material, and effort.

  • Kasual Steel

    Kasual Steel

    3 сағат бұрын

    To hope what is about to happen is not truly as stupid as your first instinct screams it will be.

  • AlternateMusicAddict

    AlternateMusicAddict

    2 күн бұрын

    They are designed to get your attention

  • MaceGaming53

    MaceGaming53

    3 күн бұрын

    At first I thought it was neat then I realized what it was and I got very irritated

  • Matthew Ryan
    Matthew Ryan3 күн бұрын

    The box is easier to open than trying every combination lol.

  • Pushkar kumar
    Pushkar kumar6 күн бұрын

    Thanks for the video I have been searching for this for a long time, now I would definitely make it .

  • USAlien234
    USAlien2345 күн бұрын

    Its a shame that lock was placed on a pine box held together with glue and tacs. Really cool lock thou !

  • Guillermo Garmendia
    Guillermo Garmendia9 күн бұрын

    Great job! Great idea! Thanks for sharing! 🤗

  • TheGermanSherlock98
    TheGermanSherlock9816 күн бұрын

    Wow! It was really fun to watch! Thank you😘

  • Ești  Cultural 😘

    Ești Cultural 😘

    15 күн бұрын

    _Hai anna iam Nagendar Ana na age 27_ JPN-star.UNO qualification m.l.t medical lab technicianf ,Srpt lo jobs unte cheppagalaru anna.with govt Jobs.

  • ASM group
    ASM group4 күн бұрын

    А не проще поставить кодовый замок, чем так париться?

  • AlwaysBeBatman
    AlwaysBeBatmanКүн бұрын

    How do you change the combo once your 4 year old cracks it?

  • j - schnab
    j - schnab8 күн бұрын

    You could easily tell which the tumbler fits into. Just push and rotate.

  • Djokharbek Bekimbetov
    Djokharbek Bekimbetov5 күн бұрын

    Такой замок к деревянному сейфу... Очень надежно... Особенно деревянный сейф

  • randomAustralian
    randomAustralian11 күн бұрын

    If you ever feel like a waste of time just think of this lock

  • macbirt56

    macbirt56

    Күн бұрын

    Just think how long it actually took him to do all that grinding and drilling. If this wasn't edited AND sped up, this would easily be a 4 hr video. 😁

  • Jawahar Eswar
    Jawahar Eswar7 күн бұрын

    Hexagon =6 sides 3 bolts =6^3 = just 216 probability ... very easy to open the locker🤣🤣

  • Donald Hitman
    Donald Hitman8 күн бұрын

    An oversized bike lock. Pretty cool as long as the gaps between don't allow a peak, I learned how to open one on the bus ride home from 3rd grade and was so pleased with myself since I'd claimed I could but hadn't tried yet. Just been told how I supposedly could by an older kid in my neighborhood.

  • Jose Ortiz
    Jose Ortiz5 күн бұрын

    OMG THIS IS REALLY AMAIZING thanks OMG THIS IS REALLY GORGEOUS

  • Sawyer Carl
    Sawyer Carl10 сағат бұрын

    So what I got out of this is I should bring my grinder in case there's locks like this or any Locks at all? Okay

  • Masterplanet 420
    Masterplanet 42014 күн бұрын

    Locks like that are the easiest to get into

  • Rhen Is Not Ok

    Rhen Is Not Ok

    7 күн бұрын

    @Scott Morgan depends on the lock and structure

  • OreoThePanda

    OreoThePanda

    10 күн бұрын

    @Tyler Blubaugh u can use more than a bobby pin, fastest I've seen one get unlocked is about 2 seconds, and thats taking stuff and getting it ready lol. And if someone is picking a lock, unless they're a locksmith, they more than likely have a set of tools. Like everyone says, locks keep an honest man out.

  • Tyler Blubaugh

    Tyler Blubaugh

    10 күн бұрын

    @OreoThePanda yeah but a masterlock would require at least a bobby pin

  • Scott Morgan

    Scott Morgan

    11 күн бұрын

    Locks only keep the honest people out...

  • OreoThePanda

    OreoThePanda

    11 күн бұрын

    I feel like a rake and a masterlock can be unlocked faster than this, simply because decoding this might take 3 seconds longer.

  • Amond Hawes-Khalifa
    Amond Hawes-Khalifa8 күн бұрын

    CORRECTION: "How to make a 3 combination lock tumbler in the most wasteful, difficult way possible." Fixed that title for you.

  • Bigstretch100

    Bigstretch100

    19 сағат бұрын

    Most of these videos are just that.

  • Juan Sarrion Espin
    Juan Sarrion Espin9 күн бұрын

    Muy ingenioso.eres un crack

Келесі