Thanks for the video. Please what's that little device you used in polishing the ring called?

@tokoden4216

Жыл бұрын

dremel tool

@Silverhand..

Жыл бұрын

Give me the time on which min ?

@davidolowoyanwo1667

Жыл бұрын

6:48

@rondolynbaker3752

Жыл бұрын

@@davidolowoyanwo1667 on 1:40 what tool is this? And is it at any hardware store? Thanks ahead of time and I Love watching your work! I'm getting ready to start doing these and the bracelet too! Advancement time!

@WARHAWK1217

Жыл бұрын

@@davidolowoyanwo1667 that’s a dremel bro bro

I make many of these type of rings, you can get all the fire scale off with a homemade pickle solution (1 cup white vinegar + 1 tspn salt slowly heated) and it’ll make it much easier and less filling, looks great!

Cool video! As someone who makes jewelry with copper- my advice to those trying this would be: Wearing gloves, At the end, wipe it down with lemon/lime juice (I use a q tip). Then, sprinkle some baking soda on it, rub it around, and use a damp paper towel to wipe it off. This will clean the surface really well. After you're sure it's dry, spray some lacquer on it. That will keep it looking beautiful and not corroding for a long time. 👍

@SabSnake

Жыл бұрын

Will it work on a Brass Hex Nut if I cut it and smooth it into a ring shape?

@celesterobbins5830

Жыл бұрын

@@SabSnake I dont see why not!

This is awesome, for some reason I want to start crafting with metals.

Really Amazing, Enjoed this video, Thankyou very much 💐👌🇮🇳

Thank you for the video I will make this and give it to my mum

You bave to add solder to the jiont, the ring may bend easily and will cuuase premature fialure. Also thay jiont doesnt look good, try soldering it and placing a think copper sheet over the soldered gap, it will remian copper colored and be much stronger

Your compass rose tattoo is beautiful ❤️

Waaaw bravo elle est magnifique ! Merci pour le partage

What is the name of the specific clamp tool you used to hold the copper strands held in a vice to spin. Does this tool have a name?

Amazing guy ❤ so lovely I want to watch your all vedios ❤❤ man can also do these types of things 😮 I am girl so I don't know about man that they can do these type of things

I like to twist The wire by attaching one end into a drill and the other end into a vice

@mikedegrazia

2 жыл бұрын

I like turtles...

@rawsonellis2038

Жыл бұрын

Thanks

Nice video. Gonna go make an open bezel like this

@jewelator

Жыл бұрын

Thank you for your opinion. I will be glad if you rate my work on my channel. By the way, in one of the videos we made a sapphire ring out of a titanium tube.

What's the trick to keeping everything tightly twisted without soldering the whole thing? Did I not twist it far enough if I ended up with gaps?

I made one same like in thiss process, but how to avoid oxidation on copper?

what brush and compound u use to shining the cooper?

Der Ring des Nibelungen.

Beautiful

The tool you used at 1:22 is so cool! What is it called? Fantastic work! Thanks for sharing!

@FPSWildlifeAngler

2 жыл бұрын

yes plz let us know

@Silverhand..

2 жыл бұрын

that is a old frenchkey or key tool

@queenofrandom8853

2 жыл бұрын

Awesome job 😄

Thanks you 😘

Wow, really cool to see this transformation! What was attached to that drill tip to polish it? I ask because I am not a jeweler, wanting to buy so I can polish some Copper jewelry I have, attaching to a Dremel. Thanks!

@Silverhand..

2 жыл бұрын

Show under the Video linked all My Tools

@rafton3048

2 жыл бұрын

C'est un genre d'amas de coton (des disque de tissu en coton superposé les uns aux autres pour leur donner du volume) ou une mousse. Ce n'est pas cette mousse qui polie mais c'est la pâte que l'on y mets.

@MikeBee77

2 жыл бұрын

D'accord, merci beaucoup pour l'information. Que Dieu te bénisse!

@izzawigsis5331

2 жыл бұрын

@@Silverhand.. where is the video

Can you fill the gaps with solder and sand it to look more solid?

@jonianddanbowen4533

2 жыл бұрын

Yes, you just need to make very sure you have only the tiniest gap between the two ends, and they are filed and clean and will seat flush. Then solder how you wish and finish.

Nice! I’ve just done one, that’s a shame that I can’t send picture… Thanks

What exactly is that blue stuff that you use at the end. I take it it’s a type of polish? I’m in Canada so I’m trying to find this kind of stuff. Thank you

@Silverhand..

2 жыл бұрын

polishing paste (Silverline )

Nice

Complimenti 💯

What are the players called that you are stripping the wire with ? Please????

@Silverhand..

2 жыл бұрын

wire stripper thongs

Nice 👍

@jewelator

Жыл бұрын

Thank you for your opinion. I will be glad if you rate my work on my channel. By the way, in one of the videos, we made gold earrings out of ordinary coffee beans.

Did you put copper in water on 2.33? Is it cold or warm water? Thank you!

@zeptfatal8286

12 күн бұрын

Idk if you still want to know, it’s just room temp, he is annulling the metal (making it soft) only works for non ferrous metals I.e. copper,silver, gold not steel. It reduces the chance of the ring snapping or cracking when bending/ working the metal.

Muy bacano

What are the 2 tools call that you use to create twisted wires?

@Silverhand..

2 жыл бұрын

I Use For The Stripping a Wire Stripper Tongs and For twisting a Old French Key Tool

@maggiecs

2 жыл бұрын

@@Silverhand.. Thank you so much!

Nice work but.... I've found that if it's not a complete solid band then the open ends are prone to catch on things and can easily misshapen the band by pulling it open and causing a need for constant reshaping. Just my opinion.

It will turn green in a couple of days, won't it?

ich bin neu im jewelry und ich mochte das ausprobieren.

Heuuu, Y a de l'idée mais faut pofiner tes techniques (à mon avis: *bague bien trop petite *la découpe aurait du suivre le file en biseau pour ne pas être visible à la soudure *soudure absente *limer, d'accord, mais c'est un peu comme le ponçage les contraintes sont à effectuer en fonctions de l'appui de la pièce à limer. Autrement dit, ton coup de lime prendra sa direction en fonction de l'endroit où est maintenu ta pièce flexible) Tu es drôlement bien équipé

@Silverhand..

2 жыл бұрын

Thanks

What kind of electric wire do you use?

@Silverhand..

2 жыл бұрын

1.5 mm

At 2:33 after torch the wire what you put into? What liquid? Is it just water?

@Silverhand..

8 ай бұрын

Water Citrus Acid 80-90 c°

I wish you would talk to explain each step😮

@Silverhand..

Жыл бұрын

I want but my english is so bad 😅

Hello what temperature did the metal get up to before quenching and how many time did you do it?😀

@rafton3048

2 жыл бұрын

On appelle ça, recuire le métal. La température n'est pas très importante pour ce faire. Il suffit de faire rougir le métal qui pars sur du orange pour le cuivre. Il te faudra plus de 1000°C pour faire fondre le cuivre autrement dit, c'est pas facile et pour ce faire, il faut du gaz et de l'oxygène. Ici, pour recuire, tu n'auras besoin que de gaz. Par cette action, le cuivre vas se restructurer mais surtout, se ramolir et devenir plus malléable

دائما انا أعلق عليك انت ب تخرمز طريقة تكسر بها الزاج يامعلم خصك نتعلم كاينا آلة تغلق بها الساعة والراحة

Moroco 👍👍👍👍👍👍👍🌹🌹🌹🌹🌹🌹🌹

What happens if you don't heat treat the metal

@FudgedDiceRoll

4 ай бұрын

Unlike iron/steel, copper is work hardened meaning it becomes harder when it was being hammered and what not. Heating copper will make it more soft and pliable

Hi. What is the diameter of the wire you used?

@Silverhand..

2 жыл бұрын

1.5 mm

@Metoo1111

2 жыл бұрын

So that’s 18 gauge I think

@Befo4eGaming1

2 жыл бұрын

@@Metoo1111 chances are its 16AWG

Is it dangerous if i do with the fire on the wrong copper or is it fine?

@Silverhand..

2 жыл бұрын

Please Tell me what is wrong Copper ?

@wombatbluehorse

2 жыл бұрын

Tarnish resistant stuff might be?

Moin Denis, magst Du mal die genaue Bezeichnung deiner Poliermaschine nennen? Das Gerät das Du ab Min 6:17 nutzt... Danke und liebe Grüße

@Silverhand..

2 ай бұрын

Woher kennst du mein Namen 😄 Das ist eine Hängebohrmaschine gibt es in verschiedenen Watt zahlen und mit verschiedenen Aufnahmen .

@benjaminmellen3420

2 ай бұрын

Wie gehst du mit den Verfärbungen auf der Haut um, bekommt dein Kupferschmuck eine nachträgliche Oberflächenbehandlung?

@Silverhand..

2 ай бұрын

Die Kupferarbeiten sind nur zum üben da um silber nicht zu verschwenden da es günstig ist und sich ähnlich verhält man kann nachträglich natürlich galvanisch behandeln und beschichten der ganze Modeschmuck besteht aus Kupfer oder wird mit Kupfer und dann mit anderen Metallen beschichtet Aber zu meiner Frage wie bist du auf meine Namen gekommen den steht nirgends 😄???

@benjaminmellen3420

2 ай бұрын

​@@Silverhand..doch, klar... in der Video Beschreibung gibts den link zum shop... da stehst du dann mit persönlichen Infos

How many millimeters of wire did you use?

@Silverhand..

3 ай бұрын

1.5mm strong

@DaviOliveira-ql5fb

3 ай бұрын

@@Silverhand..Thank you very much, I'm going to make my wedding rings in this style and I really appreciate your help, hugs from Brazil 🇧🇷

What is the purpose of heating up the copper?

@rustyshackleford96

Жыл бұрын

The heat is used to “anneal” the material, causing it to soften up. The characteristics of cooper are unique in that they are generally soft but can become hardened by bending or “working” the piece. Once it gets stiff, it can be resoftened by Annealing, you can do this as many times as you want

Ring cost kaya h

no weld ? hmmm damage ... but nice work !

I was todays years old when I learned that I was supposed to use three strips and not two!

😍🌷🇮🇶

Not sure you can quench the copper

Why was it left unglued? It is unsightly and uncomfortable.

А спаять хотя бы не судьба? Халтура какая-то.

Speak up Dude.

😂😂😂