yes, it is a very nice setup. my first "track saw" was home made. nothing at all like these new "tracks". it consisted of a scrap piece of ¼" hardboard 8" wide and a piece of scrap wood ¾" thick and 2" wide with 1 edge straight. attach the straight wood to the hardboard with screws. take your saw and run it down your track to set a precise distance from the blade to the edge of the saw. to use, place the cut edge on your marks, hold in place with a C-clamp at each end and cut away. inexpensive and right on the marks. time though to upgrade mine and add either 40 grit sandpaper or rubber strips to the bottom so i can store the clamps away. thanks for the idea on using rubber strips!

This is a valuable addition to my woodwork collection kzread.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

One of the nicest shop made track saws I've seen to date.

You started the video exactly as me in my workshop. This track saw was made for me. Starting doing one right now..

For the investment of time and material, I think I'd just buy one. Great build and great vid tho!

Fantastic job. I've been trying to think of a way of improving my timber saw guide with Aluminium. Your ideas are great. To stop dragging your saw power lead over the edge, throw it on your shoulder before you cut. Thanks for sharing.

Best track saw build i've see yet.

Wow, easily the best DIY track saw make, I've seen so far, great job.

Отличная работа! У меня точно такая же пила; если дойдут руки и хватит таланта - нужно будет попробовать сделать подобную шину.

This is realy a splendit idea.👏 Cheap, as long as you wish, and cheaper as from a retailer. Willy from Belgium.

Really like this one. Seems much better built and sturdy. So far the best I have seen. Need to make one for my shop. Thanks for sharing this.

The best DIY I ever see. Congrats. 👏👏👏👏👏

Probably the first video of a DIY track saw that made the most sense to me. Good job and thanks for uploading this video.

@mr.vereshchak

3 жыл бұрын

Thanks a lot 😊

The rubber is a great idea!!! Thanks for inspiring me!

Next to woodland ambiance, whales songs and bushcraft stuff this channel is simply relaxing me. No froth, no bloviating, no longueur. Always clean and safe workbench. Essential showing only. More power to your elbow! Grats!

@mr.vereshchak

4 жыл бұрын

Thanks)))

it's hard to believe it doesnt ever move at all just with 2 pieces of hvac piping rubber.. but if it doesn't you are definitely the man! thanks for sharing!

Professional grade instalation.The most essential track saw guide i've ever seen.My congatulations !!! @Mr.Vereshcack

Very good job! Thank u 4 sharing with us!

Brilliant idea! Beautiful workmanship. Thanks

Всё гениальное просто. Спасибо!

Mate I love what you do! Your ingenuity is outstanding. Love and strength from Bunbury West Oz.

Completely brilliant - I loved this hack.

By far one of the best diy saw tracks I've seen!(I've been researching to build my own, I think I'll copy yours 😉) I can tell your a perfectionist like myself, great video! Thanks!

@TeaKayful

4 жыл бұрын

you're a perfectionist?

@RareParts3769

4 жыл бұрын

@@TeaKayful In English.

@przemkolama

3 жыл бұрын

I agree on 100%

@dylanbennett3851

3 жыл бұрын

@@TeaKayful ya it's a curse at times lol, I want to make every detail perfect and it will keep me up at night if I can't 🤦‍♂️

@wanaraz

3 жыл бұрын

@@TeaKayful LOL. He did not say in writing but just in his work.

Great Job! Thx for sharing!

Très bonne idée pour les rails !! Surtout quand on voit le prix que ça coûte. C'est toujours un plaisir de regarder tes vidéos ! 😉

@mr.vereshchak

4 жыл бұрын

Merci beaucoup)))

Nice! That PVC edging is a good idea.

Wow, you got it man!! Congratulations from New York.

Extremely Well Done !

This is what I am talking about!! Thank you good sir!

- Excellent work ! ! ! Thanx 4 sharing.

Excelente trabajo que Dios lo bendiga por enseñarnos algo muy bueno. Saludos de Patzún Chimaltenango Guatemala.

Отличная идея однозначно Like 👏👏👏👍👍👍😀.....

Самая лучшая самодельная шина) Спасибо большое) У меня пила уже с пазами для шины, просто переверну алюминиевый профиль)

i'm also in love with my circular saw, great idea !!

This is indeed the best DIY track saw video I have seen!

@mr.vereshchak

3 жыл бұрын

Thank you 😊 😊😊

Very nice work and great ideas ! Thank you !

действительно здорово, спасибо за указание!

Идея супер! С меня лайк и подписка.

Some videos have presenters who are masters at orally conveying their message. Some you can't stand to listen to their jibberish. Some have the perfect composition of the proper view, great lighting, steady camera; others don't. Your video was perfect in SO many ways. From an educator's perspective A+. I always challenge my grad students to do a silent presentation. It is hard. It requires planning and the ability to be the performer and viewer at the same time. You need to thank all the teachers who guided you to become a GREAT presenter! (in so many ways)

@mr.vereshchak

3 жыл бұрын

Thanks a lot 😊😇🙏

Very nice work! Thanks for sharing✌🏼

Excelent idea!, Congratulations!

Świetna robota 👌 👍 💪 👌 🤘 🍻

Чудово!!Файна робота👍🏼

мастер! спасибо за видео!

simple and effective = perfect

Nicest DIY track saw I've seen yet. Well done!! But it broke my heart to see you cutting off that live edge... ;-)

@kasper2235

4 жыл бұрын

Me too. Maybe I would use contact glue in different way, but still this is best track saw project on KZread that I've seen so far.

@evertola3598

3 жыл бұрын

Nice video content! Excuse me for butting in, I would love your thoughts. Have you researched - Schallingora Dexterous Programme Scheme (Sure I saw it on Google)? It is a smashing one of a kind guide for building any shed in no time with no experience minus the normal expense. Ive heard some unbelievable things about it and my cousin got great success with it.

Best DIY track saw

Very nice! At the end I thought you might be installing pins or dowels that would temporarily line the two for extra long cuts.

I never seen so many Clamps in my life !

Very clean workshop...

Золотые руки!!! Молодчина!!! Лайк!!!

You are a master.....i’m gonna follow your idea.....

Thats a pretty sick track

Yes, just perfect! Well done once again. Another big like!!! David, Melbourne, Australia.

@mr.vereshchak

4 жыл бұрын

Thanks))) wow, Australia! that's great

@teacheng3795

4 жыл бұрын

@@mr.vereshchak You are welcome! I look forward to seeing your videos and I always learn something. You have great ideas and have the skills to demonstrate them. Thank you. David

magnifique la réalisation des rail de guidages

Excelente herramienta. La copiaré para mi sierra. Felicitaciones. Excellent tool. I will copy that for my circular saw. Congrats

@mr.vereshchak

3 жыл бұрын

Thanks you)

Great wok. Thanks for sharing.

Thanks for the idea. I can do this one. Those track saws cost a lot.

Wonderful!!!

Идея с кромкой, с резиновой полоской и салом, выше всех ПОХВАЛ !!!!!!!!!!!!! SUPER

Direi ottimo risultato del binario guida

Excellent!! Helpful.

Brilliant Job! And very simple as well. Easily adapted with another plate for a router! Cool!

@mr.vereshchak

4 жыл бұрын

Thank you!)

@mr.vereshchak

4 жыл бұрын

Thank you!)

Cool! I was wandering if you are going to permanently attach a saw guide on the saw plate, and then saw your idea to use attachment points for the edge guide. Made my day!

@Ohm51

4 жыл бұрын

True dat.

@BirdmanNorfolk

4 жыл бұрын

@Ezaarkash if you were a woodworker you'd understand, this is such a simple but accurate time and money saving design, excellent effort!

Very interesting , great job putting that together lots of work and patient , save us a lot of money

Esse camarada manja na marcenaria !!!!

C’est avec plaisir que je te découvre et que je m’abonne 👍👍

Прекрасно !

great job, love it

amazing jig thank you very much for the idea

Great ideas best track saw i've seen.thanks for sharing

Nice use of the rubber tape!

excelente trabajo felicitaciones por difundir tus conocimientos

Wow best yet! great work.

Лучшая шина что я видел))

Хорошая реализация!!! и скользит пила по ПВХ, и нескользкая подошва шины, и сама приставка на пилу добротная!!

Nicely done. A little more detail regarding materials and measurements will be a most welcomed addition

Clever , very clever😎👍

Отлично получилось!!!

best shop made saw track I've seen

@mr.vereshchak

3 жыл бұрын

Thank you))

fantástica guía , gracias pronto haré mi guía así

Excellent job.

Very nicely done!!

Really awesome track saw, that being said, the amount of time and materials used, could have had a decent knock-off track saw.

like how you screw in those eye hook. learned a trick

Very clever - well done

Отлично получилось.

Beautiful it's so what I wanna looking for

This is very, very good

Those are very nice saw guides. Congratulations😁

Верстак Супер . Распиловочный стол Супер. Уплотнитель самоклеящийся не держится на материале(у меня😪). Сало заменил на автомобильный воск.

@lllBRATlll

3 жыл бұрын

Та можно и свечкой повозюкать)))

Maestrisimo!

Congratilation, it's the better. Very easy.

Отличная работа,молодец!👍

@mr.vereshchak

4 жыл бұрын

Спасибо)

Great vídeo, brilliant idea, but, unfortunately, I can't find some issues. I'll try to use a B plane.

Great design for your track saw. I also like your work bench with the holes for hold down clamps. You just got a new subscriber my friend.

@mr.vereshchak

4 жыл бұрын

Thanks 😊

Spot on!

Very good working!

ok finally a DIY track thats worth building,,, i won't lie , i will copy this and tell all my friends it was my design lol and 238 thumbs down , are you kidding me

@alfredomarquez9777

4 жыл бұрын

Yes, there are around 238 Unappreciating idiots around...

Muy buen trabajo 👍 👏 👌