That is such a versatile idea. It can save you money by just doing that simple trick. Now I know what to buy. Instead of buying expensive bench vise, I will try that idea of yours !!

I was about to spend $60 to $100 on a woodworkers vise and you just showed me how to make one practically free and 10 times the size. TY!

@billj5645

2 ай бұрын

same here!

Sergio you are a good man with common sense. Thankyou. Using a mobile vice or its parts is way cheaper that buying a kit or a vice. Cheers to you.

Your woodworking videos are a true inspiration to all woodworkiers, please keep on making them. Regards.

Brilliant idea. Thanks for sharing your techniques. I will do this also.

FINALLY, a video that is actually worth watching which suggests something worth BUILDING! Well done!

@WoodworkingwithDIYtools

4 жыл бұрын

Thank you very much 😃. I think this is the perfect candidate to be our first workbench vice 😁

Thank you, you just saved me roughly $16-$20 with this design!!!! FOR NOW, I do not need to go out & buy Pipe Clamps to make myself a bench clamp!!!! Thank you again for such a SUPER SIMPLE idea/design!

You sir are a genius! Great yet simple idea. Thanks for posting!

Another brilliant inexpensive alternative to throwing money at a need. Well done and thanks for sharing

Best easy and cheap clamp setup I’ve seen. Hope to build it soon. I think I already have the parts - that always wins!!!

Bro, this is a great idea. simple and effective. nice! bravo

@rosalienacario6028

7 жыл бұрын

Sergio Acuña Padin

Simple... effective.. most of all,cheap... love it

Thank you Sergio, as usual your knowledge and creativity is greatly appreciated, I'm making this for my little shop, one more addition that you contributed to my projects

Very nice. This will solve a problem I have been struggling to find a solution for. Thank you!

That is one nice Moxon vise! Very simple to make and inexpensive too. Thanks for sharing this very helpful tutorial.

Genius, simple and obviously affordable. Thanks again

Love this idea, I have some of those types of clamps, I will give it a try. Thanks for the idea and inspiration.

Sergio, You've done it again. So simple and yet to handy.Cheers. John from Australia

Very good! I am beginning and I am so happy to see that one does not need many expensive tools to make many useful tools! Thank you.

Very very clever idea...I will definitely be making this..Thanks for posting, Sergio

Yet another simple but brilliant idea. I was looking for a cheap way to make a big vice and this fits the bill perfectly. Thanks once again!

Thank you for posting this video. Great solution for my needs. I found a project to do today!

it's amazing creativity i have ever seen, great job bro n tank's very much

Very nice! I was thinking a little while ago about if there weren't any nice things to be built out of cheap clamps. This is definitely one thing!

I love your simple cost effective solutions. You are very creative. Thank you for sharing.

Amazing and simple. Pure genius.

I was trying to think of a way to do this, and just kept coming up short. I was in my mind, using pipe bar clamps, and there wasn't a good way of adjusting the pipe length. I also had over complicated the whole affair. I thought about it on and off for months. Along comes Sergio with the simplest of solutions and a vice that is useful. I give you AAA+++ for thinking outside the box. Good job. It was so easy to do, no time at all. The only thing I have left to do is go to the store tomorrow and get some kind of angle bolt, or make something that will work, but that is easy. GREAT JOB!

I really like your ideas, it takes a lot of thought to makes something this flexible and useful.

Great idea I’m gonna use this idea on my new bench while I’m waiting for my vise to arrive, heck I might just keep it on one end, thanks for sharing.

You've just helped me solve a tricky problem. Thanks!

This is the best idea I’ve seen! I’m going to make one! Thanks!!!

I love all your ideas! Thank you so much. This really helps me.

Sergio thank you for sharing another excellent idea!

The simplest solution I have seen. Well done, great job. (I think I might use this one!)

Ingenuity and make do with what you have in a workshop filled to the brim with sustainable appropriate technology masterpieces . Just like it is here. Bravo!

Very clever use of what you have at hand. Bravo!

You have great ideas! Thanks for sharing! Your videos are well made, easy to follow, and enjoyable to watch!

This is really a great idea. I will make one for my workbench. TY!

I love it. Cheap and simple, and he did not use any expensive equipment to make it.

Great Videos Sergio. You've given me a lot of great ideas without spending money on new tools.

Excellent work again Sergio, I will try this myself gracias.

I discovered your channel last week, i love the cheap and simple ideas you have come up with. Thanks.

This will save me a few quid! Many thanks, great idea.

Thanks again, just what I was looking for, good simple solution!

Simple but to the pont.Thank you Sir.🎉

Wonderful idea! Thanks.

Segio. Hi from 🇨🇦. That is the most straight forward and easy to follow video. Thanks for saving me LOTS of money. I will add this to the other end of my work bench. This is truly a money saver . Keep up the great videos please.

@versatileduplicity9313

6 жыл бұрын

Mr. B yep, don't buy a vice. Just make one. Like i hate the prices of vices, it's so stupid !

Excellent use of shop scraps!

Bravissimo!!! una semplice ma meravigliosa idea che mi ha risparmiato un sacco di problemi!!!!!! Grazie a presto

Great idea! I've been in need for a simple vice for a while. The other "cheap" solution I've found uses pipe clamps, but I don't have a drill press to accurately drill the holes for them. Thanks!

What a extremely versatile vise!! You can put additional slots to hold your clamps further away for wider peices , use longer clamps. I will adapt this to my job site bench!! Thanks

@WoodworkingwithDIYtools

5 жыл бұрын

Making some different wide wooden jaws and getting ready the workbench to install the one you need ... thank you, that's a nice idea 👍

Exellent idea very very good. I love your vids. You show us what you are doing. You are a professional .

Very clever and well explained. Thanks.

Thank you very much , I really wanted a vice without using pipe clamps cause its not available where I live , but these clamp are available . Good job , keep up the good work .

Nice idea, very simple and effective.

Very brilliant idea, thank you much.

Ok Sergio, so simple, so fast. It took about a half hour to an hour. The only thing I had to change was the L bracket to an eye bolt as I couldn't find a bolt pre bent or one I could bend where I live. I put an eye bolt on each side of the clamp and put a hitch pin in to hold the clamp. (hitch pin, think of a strong bobby pin). I'm up and running now. Thanks again.

Brilliant Job!!!!!

This is what I looking for! Thank you so much.

Very good idea ! Bravo !

Just discovered this channel and one of the best !

Wonderful thank you I am subscribed and now i will make this project you are an excellent teacher.

You have many inventive ideas, Keep them comming.

Good idea for a cheap Moxon vice. Good stuff...

Parabéns pelo projeto... simples... bem explicado e funcional...

Smart idea Bro, the most optimal I see so far. Thank u so much.

So simple, Brilliant.

Excellent job.

Hi Sergio, first, your channel is brilliant, so many designs and ideas. I’ve just completed your moxon vice, easy to make and simple to use plus completely removable.. Thanks. 👍👍

that is uncomplicated and a great idea thanks Sergio

Incredible. Thank you for this video

Nice vice. I'll try to make one. Thanks for sharing.

Thanks for the idea of this, I’m going to make this now

Thank u for this idea. That's what i need. Genious

Wow..you are genius. Thank you.

Segio that is one of best Maxon vises I have seen made for the least amount of money. I applaud you for you very clever design and useful idea.

@cesardevin9454

2 жыл бұрын

You all probably dont give a damn but does anybody know a tool to log back into an Instagram account..? I somehow lost the account password. I would appreciate any tricks you can offer me!

@colsonangelo8202

2 жыл бұрын

@Cesar Devin Instablaster :)

@cesardevin9454

2 жыл бұрын

@Colson Angelo i really appreciate your reply. I found the site thru google and im in the hacking process now. Seems to take quite some time so I will reply here later with my results.

@cesardevin9454

2 жыл бұрын

@Colson Angelo It did the trick and I finally got access to my account again. Im so happy! Thank you so much you saved my account!

@colsonangelo8202

2 жыл бұрын

@Cesar Devin no problem xD

This is such a brilliant budget idea. Really good

@WoodworkingwithDIYtools

3 жыл бұрын

Thank you very much. It is amazing that I made this video some years ago, but people like it yet 😀👍

This is awesome. Last winter I tried to build a simple vice but I did not succeed. In the end I found it too complicated and I did not finish it since that time. This looks so much easier. One of my next projects. Thanks for sharing.

@bernardhvanengen5002

6 жыл бұрын

Hello Sergio, good job, however it could be easier with just the square hooks, a pair of standard clamps and any piece of fairly thick wood. On my workbench I have a higher apron with dogholes in which I use doghole clamps or modified F-clamps and a piece of scrap wood.

@watcherdude1330

6 жыл бұрын

Bernard that is a very good idea of dog holes. That would work really well . Good thinking outside of the box 📦

Great, simple, ingenious

Awesome and simple, I'll make use just like that!

Simply the Best!

¡Nunca hubiera pensado en esto! Elegantemente simple.

Thanks for the nice video that I have been looking for!!

Thanks for sharing this idea. It just pulled out of a thinking spiral of how to install a removable moxon vise. You´ve got yourself a new subscriber :)

it, a very good idea sergio,thanks for sharing us your video.

thanks for sharing brother....i appreciate the great ideas.

Wow... Beautiful idea

@WoodworkingwithDIYtools

3 жыл бұрын

Thank you very much Demiver 😀

Very clever. Thank you for sharing.

Very good idea.

Very clever and practical.

Thank you...just what I needed

very simple and strong thanks a lot for sharing big like

Muy bien hecho si señor!!!

Excellent video...thanks.

Very clever (and cheap)!

simply awesome!

Great idea. good job

Nice miter saw !!!

Great job! I Like it.

Fantastic and so simple to make, you have shown that even for someone like me an enthusiastic DIY novice around woodworking anything is possible...Well done that man for empowering us to take up the challenge...👌👍👍

@WoodworkingwithDIYtools

5 жыл бұрын

I've been making my homemade woodworking projects for years without a workbench vice. Now I see I should make this vise long time ago :D Thanks for watching