this is the best sim diy channel on youtube ..serious

@amstudioprojects

5 жыл бұрын

Thanks!

@bobross5778

5 жыл бұрын

For sure, no competition.

@micahtritscher951

5 жыл бұрын

Not disagreeing, but how many other diy sim KZreadrs do u know 😂

@pakowsky2656

5 жыл бұрын

Yes but expensive

@cloudstoragexd5101

5 жыл бұрын

@@pakowsky2656 compared to buying from some company, the price is competitive, and cheaper most of the time. It's for people with time and want to have the ultimate customization for their rig

you never cease to amaze me with your creativity and ingenuity

Awesome work there am! A lot of effort and hard work put into this well done m8 keep em coming

Spectacular without words, good work. I hope more mods for this steering wheel that you have done, put some screen, rotary and stickers

This is one talented bloke ay!. Looks like a ripper mate, well done!.

You Sir, are awesome! Best content for DIY sim racing. Lapping the competition! I think I will cya on Patreon very soon :)

Awesome work as always!

I like these kind of 3d projects. Great video!

Wow! Excellent stuff as usual. Definitely gonna have to give this one a try... now to get a 3D Printer!

very nice project, congrat ! you helped me a lot for my button plate project

Please make a 2dof sim, this is the best DIY channel ever

Really nice work!

Try doing diy seat rumble please

Please more steering wheel videos!!!👌🏼

Always the best!!

Nice, now can we have some magnetic paddle mods for the G27/9 wheels? I'm sure you know how mushy and strange the paddles feel. Alternatively, could you do a guide to wiring the TM1836 displays (the one at 2:56) with Arduino nanos? I'd also like to see how you can connect buttons to the 8 button terminals at the bottom and get them working as well, so there is no need for 2 USB cables. Please, I know you've done a video on a TM1386, but that was a separate dash and I want to see how you could integrate it with the buttons so that the end result could look like this wheel and the TM1386 (In a way like the BMW Williams wheel of 2004 that Juan Pablo Montoya drove).

Amazing design!

best diy sim channel

@amstudioprojects

5 жыл бұрын

Thank you!

Top job sir.

I absolutely have to do mine!

can you please make a video about designing this and just things in general in fusion.

today my ender 3 arrived after 1 month of delivery, cant wait to try this out 👌

@amstudioprojects

5 жыл бұрын

Nice!

It is a very good work friend, it would be nice that in the future you will take a variant with 2 clutch paddles and the central screen, even so very good design I do not miss a video

Damn that’s good work keep it up boi 😁👍

@amstudioprojects

5 жыл бұрын

Thanks Marco

Great project! How much infill density do you recommend for the base?

Nice, looks like the lower tier Formula #(number somthing i dont know) steering wheel in assetto corsa

Built this today with my little one. It is the perfect wheel for him since it's a little bit smaller in size than the Thrustmaster wheels I have.

@TrevHowsonDemon82

4 жыл бұрын

Hi I know it's been a while, but can you remember how long it took to print this in total? Places by me charge by the hour to print and trying to get a rough cost.

Great video ! ;)

You are amazing!

That looks great. Having a 3d printer seems to be standard by now.

You are the best mate

@amstudioprojects

5 жыл бұрын

Thanks!

How much filament did this project use? Cool stuff bud. Really enjoy the channel

Can you make a toutorial on how to get the horn on an aftermarket steering wheel working for the g29, like your OMP steering wheel :) and i think you're the best diy channel on yt, i love the videos

great video! subscribed !

@amstudioprojects

5 жыл бұрын

Thank you!

Wow, great video. Thanks for the hard work! I would like to ask what is the outside diameter of the wheel and if available how much it weight

Very cool

Did you run any simulation or force analysis to determine the support structure or thickness of material needed for stronger wheel bases?

YEAH!!! Another video! Please upload more frequently ;-) By the way what printer do you recommend for these projects? I think it should be pretty big....

@amstudioprojects

5 жыл бұрын

I used the Ender 3

Hello, can you make a tutrial for make a push pull shifter like in wrc. Thank you and good video / design

Hello, congratulations for the beautiful projects and the sharing initiative. Could you inform the time for completion of this impression?

dear do an overview on connecting led warning flags.I'll be grateful to you.

Amazing!

@amstudioprojects

5 жыл бұрын

Thanks

Looks awesome 👏🏼 Wish I could use it with a Fanatec CSL base

@yakfish36

5 жыл бұрын

You can but you need to sacrifice a current wheel to get the connectors and boards. Its a bit of effort but doable. Im also looking into tge blutooth connection set ups on the new dd and hoping to retro fit one to my 2.5 will post how it is done if i can get it working that way as it will be neater.

*Tutorial for the complete wheel setup plzzz* That will be extremely dope

nice vid man!

@amstudioprojects

5 жыл бұрын

Thanks!

@joshblockley5628

5 жыл бұрын

Nice I !

Best regards mate!!! great job yours congrats. I have logitech Momo racing rig and I dont know if spacers and quick release stuff will fit properly over the stering wheel mount. Let me know please , and if will be afirmative you´ll have new order soon.

Great!!

Awesome can you do this with a Driftwheel like the BMW?

👍🏻 Nice

Could you make an f1 style clutch for the logitech g29? Its my dream.

i wonder if its possible to get a display mounted in the wheel to show you the speed, the gear and the rpm? it would be cool

Great video! You should do a Fusion360 tutorial of this!

Good and best video, can you bring the file in dxf format for make steering wheel on my cnc machine

Can you make a tutorial for analog clutch paddles (behind the wheel) like f1 cars have? Thanks!

@Pepeex22

5 жыл бұрын

Good idea!

@DCtropical

5 жыл бұрын

@@Pepeex22 thank you!

@alexsib444

4 жыл бұрын

you could stack 2 magnetic shifters and cut off from the clutch one in order to make it smaller (that's what fanatec does at least).

@chickenjonte_

4 жыл бұрын

@@alexsib444 it wont be analog

@alexsib444

4 жыл бұрын

chickenjonte true I cannot argue

could you make an upgrade to the thrustmaster t150 rim?

Loveeeeeeeeeeeeeee this is so cool ❤️

@amstudioprojects

5 жыл бұрын

Thanks!

Well done, but always with a Logitech Wheel base , how about DIY the hole thing 3d printed Keep up the good stuff

With which program or app did you do the pieces of the wheel. For the printer, because this is absolutely amazing.

Nice! Is this solid enough for heavy duty usage with 100 FFB ?

Very cool. Does the wiring work for a G-29 PS4 version?

Hi amstudio I'm considering making this rim. I use a 20nm mige motor direct drive wheel. Would you say it is strong enough for that or any advice to make it so. Any help would be greatly appreciated. Amazing work as always

I was thinking about doing something similar to this using a seperate logitech button cuircit board and then i can plug it into the actual wheel when i dont use the stock one so it looks cleaner, not sure if it will work though.

You know what would be great? A design for a single-axis F1 type magnetic shifter. So that you can up and downshift on both sides of the wheel!

@ALLRNDCRICKETER

5 жыл бұрын

Technically what is a WRC shifter paddle, yes I'd love to see him make one of them 👌

@rjl95

5 жыл бұрын

I think you mean the ones that don't have one central pivoting point? E.g. you could drive with 1 shifter paddle on one side. The F1 type have one shared axis in the center which they rotate around. So the left and right shifter meet in the middle basically.

@ALLRNDCRICKETER

5 жыл бұрын

@@rjl95 I get what you mean. I don't think it would be possible to 3d print a system something like what were saying, due to the face that there needs to be the wheel mounting point in the middle, plus on most F1 wheels they come above the wheel mounting, and are very thin. 3d printing something such as would no doubt break with wear and tear over time

@pirozcontractor6006

5 жыл бұрын

@@rjl95 i think Fanatec have already done that with the 650S wheel

@rjl95

5 жыл бұрын

Yes they did, but now we need a freely available 3d-printable model/project :D

hello a change for the shift cams to drive with a hand that is my case thanks

Also I've finally finished your sequential shifter build, anyone suggest how to mount it???

Hi great video. Could i Ask is this diable on a ender 3 and is there aby difference to make IT compatible with thrustmaster

This is epic, but how do you set it up on the pc

Do you also add a front cover for a digital screen as well? I want to buy this project but I'm not sure about this detail.

Does anybody know if these mods will work with Mac computers? I just started my journey with SIM Racing and unfortunately I do have DiRT4 as well as 2017 F1 at this moment but not sure if I can apply any of modes from your channel. Great content one of the best and found it right away into recommendation!

Great video dude, i have a dead smartphone, is there a way to use the screen on my rig?

Would this fit onto the fanatec clubsport or podium wheel hub

Hi, thanks for your videos, what is the size of the wheel?

Could you please make a video on how to make like that drifting type steering wheel i need an idea for a wheel cus i am making totally diy steereng wheel and pedals.

Does the FFB remain unchanged with the adapter or is it slightly tamed?

Is there a usb port coming out of the steering wheel that you plug into your computer to make the buttons work?

how much does it cost? 3D printing, electronics, etc.

Hay manera de que el cable usb pase por adentro del volante o conectarlo con el mismo, ya que a la hora de enchufarlo el volante gira y se enredaría el cable

hey @amstudio! what size is the biggest part to be printed for completing this steering wheel? I'd plan to get the files and use my Anet A8 which has printing dimension of 22x22x24 cms but I expect it's a bit too small for the task, am I right or wrong? Thank you in advance and keep it up with those amazing works!

@amstudioprojects

5 жыл бұрын

The biggest part will easily fit on the A8.

For anyone that has tried, will this work for PS4 on F1 and GranTurismo? Thanks. Also, what would the ten buttons be used for?

Is it possible print anything to use it on a fanatec base without the universal hub?

Hey amstudio and comment section wondering if it is possible for some of the projects like the F1 wheel is able to upload the code from a PC and then use it on a console (Xbox one).

hey amstudio- i have a question with the usb joystick boards- they say they have 12 buttons- can you make more- using the up , down , left, right? and if so- is it straightforward?

Sooooo this is sturdy for hard core racing?

Awesome waw

Idk how I’m so late finding these tutorials but after seeing how long they’ve been up I have to ask.. would you be willing to revisit these projects in an attempt to make some DIY wheels that’ll be compatible with MOZA bases?

Fantastic job!!! I was thinking about doing something simular myself. But being a noob without much free time this is fantastic. I bought the plans and want to alter the button cover in fusion 360 but i am struggling to convert it so i can edit it in fusion 360. Is there a possibility to get the .f3d file of this part? It would make my life a whole lot easier. Thanks again, love your work.

@amstudioprojects

5 жыл бұрын

Send me an email

I am disabled using hand control for the gas/brake. Do you have steering wheel with shifters and gas/brake (clutches like)?

Is it possible to change the g29 quick release and put an thrustmaster adaptater for t300rs ?

Hello, awesome videos, you are very talented, may you tell me if you really used that chinesse filament from BG to make that pieces? Im looking for a good quality and cheap filament, and your prints looks really great. What brand of filament did you used? Thanks in advance!

@CW7_

5 жыл бұрын

Don't try to safe money on filament. There are already enough sources of potential errors when it comes to 3d printing that you should rule out the filament factor at least. Any filament between $20-30 with good reviews on Amazon should be alright.

hi, can i put a rotary switch with this USB encoder or buttons only? thanks...

Hi i have a question is it neccesary that we use nextion screen or do we have other screen choices? Thanks in advanced.

I have a question: So I want to build this too, do I have to order the amount of parts that are listed in front of the link? Or do I have to order that product twice for example? (Hard to explain I know) And does this work with Codemasters F1 2018? Thanks

Can you make a 3D printing tutorial please

So after I'm done building this do i need to do any programing of the buttons or do they all just work?

Hi, I'm planning to make one. Could it be printed with ABS? How much filament will I need?

Where can I buy the quick realease for g29 or g27?? Ty so much ;D

Is the usb encoder plug and play e.g plug into wheel and play xbox one. Or is it the case you can only use this on pc via software.

Do you know if its possible to mount usb handbrake to fanatec table mount without any extra holes

Hi great video . Just starting out with 3d printing. Do you know where I can find files for these ?

But how can you feel force Feedback from the g29 but use butten and shifter input from the wheel