Thanks. This saved my summer trip. :D I've had the boat for 4-5 years and haven't thought about the roller bearings at all, until my sail jammed and wouldn't roll up.

Thanks Tino. A good reminder on the Furlex. I have to plead guilty to ignoring mine for the last few years. Now that I see it is not too difficult to grease it, I'll follow your lead. Much appreciated.

Hello Tino, i have a bianca 27 and it isth first time that I use a furling.... Thank you for the help... I have to take courage and dismounted it...

Great job showing us where to grease the furling system. Thank you for sharing.

Selden owes you...they should be producing videos and providing instruction like this. They build a good product but they write crap instructions and the few videos they have produced are sparse on actual useful information. I could not for the life of me figure out what that wishbone shaped piece of metal was, I have it on the foresail and on the furling mainsail. I felt like it had something to do w/ sail feeding but did not think of it as a guide. Maybe Selden buried that info somewhere in their manual but I haven't found it. Thank you for the instruction!

About to do mine again and this is a great reminder of the steps and important parts to lubricate. Thanks for taking the time to film and post. Very helpful.

Thanks for this Tino. As with all your videos, this is very useful and easy to follow. The Furlex instructions are not very clear but with your help I have greased my Furlex this morning.

Just disassembled and lubricated my Furlex and your great detailed video was a huge help. Thx.

Thanks a lot for tout video. It will be easier for me

Great, thorough and well described furling system maintenance video Tino. My Catalina 385 rig is the same - and you have helped my immensely in planning the maintenance I will do when we launch our boat next spring.

Thank you for the very informative video. The system on my Delphia 37 is the same. I had some problems two weeks ago, and now know how to fix them!

Thank you so much for your great videos. You’ve helped us so much. We are sailing my friends Bavaria 45 cruiser. We are big fans and love when you say Yea All the Time. And mimic you every time we work on the boat. Lolo

@twiper

4 жыл бұрын

Ha ha 😀

thank you for doinf this video, i have to do the same on my bavaria has not been done in years and the furler is getting tighter and tighter !

Very helpful Tino, thank you.

Thanks for the effort. Great video, very helpfull!

Just did this. Used this video to help. Captain Weltzien sent me here. Thanks

Great video and demo Tino. Thanks. You got me inspired and started. Per “Breeze”

pretty good job bud on our boat we use a syringe and fill it with grease much easier to control and get into tight spots

Amazing video, thank you so much.

Great video again. Never have I seen such a well greased A-hole :P Joke a side is nice to see you explain all these detailed and “minor” things - which might not be so minor after all.

@twiper

6 жыл бұрын

Ha Ha. Thanks :) - I had some problems with the furlex system on my old boat I had for 11 years, but never thought of lubricating the bearings. I remember lubricating the wire that goes through the furlex, a total wrong thing to do. But one thing I found out was it could furl better if I tightened the shrouds the right way. Something I get into in the next video.

Great video, Tino 👍🏻

@twiper

6 жыл бұрын

Thanks :)

Thanks for the vid very helpful

thanks , very useful

Thanks Tino

Tino, Hows your stove? We're currently pulling it apart and getting rid of some rust that has formed on our barvaria stove tops.. Was a fun project..

Best way is use a little bakery brushto spread the lubricate in the bearings!

@twiper

6 жыл бұрын

Yes I'll use a brush the next time.

hi Tino! and happy new year! can you do the same video for the mast.how to lubricate selden system, please? i don t find any tuto on internet. thanks for your chanel

@twiper

4 жыл бұрын

Yes I'll make a video 😊

@bruce065

4 жыл бұрын

@@twiper thanks a lot! i have the same sailing vessel in south of france. I bought it in december 2019. and i have got a lot of things to check before sailing! your videos help me so much!

"The a-hole" :-)

I have a quick question. How do you keep the cover fixed in place. It's wobbling from side to side on my boat and I can't figure out what's wrong with it. Is there a screw to hold it in place or some other mechanism?

Another tip. You better change the snap in the top for a harp. The snap can come easily loose and the sail comes down!

@twiper

6 жыл бұрын

I know a snap can go loose but I have not experienced it before in the top of a genoa. On my first sailboat the jib sheet was attached with a snap and I remember it went loose many times when it was hitting the deck. My first sailboat had no furlex.

@pblnlpalu

6 жыл бұрын

Tino G - Sailing HiTino, only if you need to change sails often a snap is handy. Many members of our Bavaria club in Netherlands experienced the snap collapse. They installed the harp.

@twiper

6 жыл бұрын

Voornaam Achternaam - ok thanks for the info :)

Tino G, what did you use to polish and wax the deck? Looks good.

@twiper

3 жыл бұрын

Thanks :) It is mostly washed with Hempel´s Clean & Shine boatshampoo

He doesn't know. His words .

@twiper

2 жыл бұрын

You're probably right, but thanks for watching anyway :)

Thanks again Tino! You did well! ( Also see: kzread.info/dash/bejne/X2qbxqqmh7WeaM4.html)