Thank you! This video saves me every time I forget why my loft isn't working ... always does the trick. All the best!

So many things to learn... and new functions as LOFTING now. THKS for this tuto - it oppenned new avenues I was just fighting to get - otherwise.

Thanks for the video! It was super easy to follow and your voice was really calming. Can't wait to watch the next one!

I start learning SW, it's awsome, so much possibilities

Great tutorials. I just start learning this. Thanks

Question: I dont get the pop-up windows {properties, line properties, etc} that you get when you click on the point, and then the line that you piercing. Can you tell me what I need to change to correct this?

You have a very soothing voice.

hello...1 question why when i try to select the 2 line on squere i can t select both line ? and why when i select the middle point and the origin they put me only in the origin point ?? sry for bad english i hope u can understand me..have a nice day and ty

Can you sketch a gimbal for mobiles?

Thanks for the video, really helped me out. But what is that pop up window you get when drawing and using tools etc? Never seen that before

@JokoEngineeringhelp

4 жыл бұрын

The popup window like what comes up at 1:42? That would be due to my settings - normally it takes the place of the history tree but I had adjusted the settings to make it come up as a separate window.

Great Job Sir❤

Hey Joko, I am busy with my magister in engineering and need to create a model of a finned coil heat exchanger. The fins need to be updated from a plain configuration to something that would be seen in the industry. The new fin needs to be contoured exactly like the actual heat exchanger's fin. I am only simulating the flow through one segment of the HX to save computational resources for my laptop which will be performing the simulation. Is there any way that you could help me in creating the fin?

@JokoEngineeringhelp

8 жыл бұрын

Are we talking about the basic "zig zag" type fin that you would see on a car radiator?

Congratulations!!! Very good content for your videos

@urbanid8692

3 жыл бұрын

kzread.info/dash/bejne/fYCb2LyzqpfAZbA.html

I need to conect two triangle profiles but when I select the first tell me "the sketch should contain a single open contour". Can you help me?

@JokoEngineeringhelp

5 жыл бұрын

Yes the profile you select that gives the error means that the triangle isn't closed, or it's made up of multiple sketches instead of one. Make sure all the lines of the triangle are connected, sometimes the lines get close without actually touching Reply back if you need more help

How do you keep your sketch drawing in view mode. Mine dissappear when I leave the current sketch. And it's hard to see without it.

muchas gracias señor

Thank you💗

Thank you ese

thank you so much

awesome presentation of the Loft video indeed. Thanks.

Very helpful thanks, you deserve alot of thumbs up!

Thanks

Can we use features , surface and sheet metal modules in one same model ? Or it only can be used individually?

@JokoEngineeringhelp

2 жыл бұрын

You can use them on the same model, but if algebraic surfaces of sheet metal is broken the model will no longer flatten

You hold ctrl and select the points to pierce! For anyone really new like me wondering why nothing is working.

I like the tutorial, one note don't ever put a bolt flange under the curve section..how you gonna get a wrench under there?

@josephcoon5809

4 жыл бұрын

A wrench abound t be a problem. A ratchet would be more of an issue.

@EJReed

4 жыл бұрын

As an engineer, it is your duty to make things as difficult as possible for the people that work on your products.

@zachgould1989

Жыл бұрын

@@EJReed as someone getting an engineering degree and someone who is a machinist I have a large love hate relationship

Thank you

Hi, could you do a tutorial on a cycling helmet? Many Thanks

Hey, I couldn't execute the make pierce relation. I am just getting the error message, "No intersection found for pierce point!" Please help me with the issue. Thanks.

@JokoEngineeringhelp

8 жыл бұрын

For the pierce relation, I imagine you're in an active sketch piercing to an inactive sketch. The error occurs when the sketch plane you're using on the active sketch does not have contact with the inactive sketch. If you adjust the sketch plane on the active sketch to collide with some part of the inactive sketch, you'll resolve the error. Message me again if I can be of more help or clarify more.

@vignesharavind645

8 жыл бұрын

Thanks for the detailed explanation. It was really helpful. Got the issue resolved.👍

@JokoEngineeringhelp

8 жыл бұрын

Excellent, good to hear

@raouldemer2300

4 жыл бұрын

I love inches!

I like tutorial for understand mor solidwhork

Joko, Thanks heaps Mate. this has sorted me out

very good

HAN Automotive was here!!

Whoah very useful indeed, imma take that to build a faucet handle for school project, ya saved my ass lmfaoo

@JokoEngineeringhelp

3 жыл бұрын

Glad to help. Also check out the 'shell' function if you're unfamiliar with that

im stuck doing ship structure from surface created from maxsurf. can u help me?

@JokoEngineeringhelp

8 жыл бұрын

+Shafif Saleh Are you stuck doing a loft? If so, what part of the loft ?

@shafifsaleh3286

8 жыл бұрын

actually not doing a loft. i got surface from other software. then i want to develope structure from the surface. the problem is i dont have sketch reference on the surface

HOW TO UNFOLD THIS FOR SHEETMETAL CUTTING AND BEND

@JokoEngineeringhelp

4 жыл бұрын

Unfortunately only developable or algebraic surfaces can be unfolded for sheet metal; this would be a NURBS surface and SolidWorks doesn't have sheetmetal functionality for this. Sheetmetal loft may be able to produce something that will work but it would not have curvature. Flatten surface could flatten this as I do here at 3:00: kzread.info/dash/bejne/ppimltWkZ5W1p6g.html But flatten surface would not be applicable to a sheet metal design. I had a user ask a similar question about sheetmetal on NURBS surfaces and I made them a video here: kzread.info/dash/bejne/oqOO0aOpcpCpqbg.html There are paid add-ins for SolidWorks such as blankworks that might be able to flatten that flange. Good luck

I am really liking learning new features on Solidworks, but I have to ask with this part, how would this be manufactured in the real world besides 3D printing?

@JokoEngineeringhelp

6 жыл бұрын

If it was in my current place of work, we would source the tube and weld the flanges on after plasma cut in house, but you could probably find a foundry to cast the whole thing if you needed to.

@JuanHernandez-ub3ez

5 жыл бұрын

Weld maybe?

Thank you very much.This is a good lesson and your explane is very good.(in İstanbul).

@JokoEngineeringhelp

4 жыл бұрын

Thank you!

Very Nice !!!!! LIKE LIKE

Tak kiro wong jowo

Hello Can you pls do gaming chair model...

Good

Hello dear brother, I am a follower for its beautiful models. I have a question, if possible . I have a project I work and it requires me to design in all its parts van was doing it. You can even communicate. Thank you

pak, apakah anda punya tutorial sw inspeksi?

thin feature don't show up. wtf

??how to flatten this part

@czr7j9

5 жыл бұрын

I think it has to be modelled in sheetmetal

And just like that my solidworks ability doubled. Thanks a lot

that's fine if you want your finished faces at 90 degrees. what you didn't explain or demonstrate is how to do a loft with two parallel planes

@JokoEngineeringhelp

3 жыл бұрын

I'm not sure what needs to be explained? You would use the same method

No intersection found for pierce point

@hughmungus8784

Жыл бұрын

This program is driving me CRAZY

good job

Why you speed up at the last part?? I'm a newbie so i need to know how to do those "mickey mouse" shape...someone please help me with it

Is being an engineer worth it? I got an engineering degree, but I'm pretty intimidated still.

@JokoEngineeringhelp

8 жыл бұрын

Yes it's totally worth it! Don't be intimidated, I was hired at my current job over people who had more skills and credentials than me because they like my personality and people skills. Wherever you go, you can bring something valuable to the table. Hope that helps

@hans_____

8 жыл бұрын

Joko Engineeringhelp Thank you, that really does help.

@JokoEngineeringhelp

7 жыл бұрын

Hey Hans I wanted to see if you've got a job or you're good where you're at?

@hans_____

7 жыл бұрын

hey thanks! I applied to several places, but heard back only from one. There I got an interview and even the job. But I had to build and program robots. I had done that once in college in a team, but didn't really know what I was doing. They didn't provide training, so it didn't work out. I lasted half a day before being let go haha. Don't know why he hired me in the first place. So I'm still looking.

@JokoEngineeringhelp

7 жыл бұрын

Email me at jokoengineeringhelp@gmail.com and I'll help you find a job

1:35: "Now I'll get normal to my front plane" ? That's where you lost me. Not making sense. Can't procede.

@josephcoon5809

4 жыл бұрын

From wiki: Normal (geometry): “In geometry, a normal is an object such as a line or vector that is perpendicular to a given object. For example, in two dimensions, the normal line to a curve at a given point is the line perpendicular to the tangent line to the curve at the point.” Getting normal to a plane means looking directly at it. Looking at a plane when you are parallel to it means looking at it from the edge. Isometric means looking at it somewhere between perpendicular and parallel to it. For example, looking at a book when you are normal to the cover allows you to read the title, but you wouldn’t be able to see any other side, so you couldn’t tell how many pages it had. Looking at the book parallel to the cover, you wouldn’t be able to read the title, but you can see how thick it is. Looking at the book isometrically will allow you to see the title AND how thick the book is.

me me big boy

@nazikmohamed

5 жыл бұрын

kzread.info/dash/bejne/ZGGerZSNcbDUiMY.html

you kind of remind me of bob ross

Joko tai