Amanda just a helpful tip... lf you buy welders gloves they will keep your hands safe as you load more wood into a hot stove.... they also come up covering your forearm for added protection..

@williebasford1482

2 жыл бұрын

what I do

@brianwelteroth9248

2 жыл бұрын

Came here to write the same comment, also you need not throw the logs in with welder's gloves. Tossing the logs in risks breaking the bricks.

@waynegretzky8464

2 жыл бұрын

@@brianwelteroth9248 fellow brick breaker here! can attest than welding gloves are a must! make that ol stove last just another century

@crisdeeming2758

2 жыл бұрын

Yes by the wife a pair every x mas.

@rowanjones3476

2 жыл бұрын

Yep, a good investment for anyone with a wood heater

Yep, I can heartily agree with your method. The key part is the firebed - the layer of hot embers onto which the fuel stack is placed. It can take up to an hour to create the proper firebed - it should be seriously hot - stoke it with a bunch of wood with all the dampers closed. Minimum airflow will drive off all the volatiles from the wood and leave you with what is basically charcoal. Distribute that mass of charcoal evenly so the air can get through, open the dampers and let the airflow go to maximum. If the flames go blue and you have plasma dancing in the firebox, it's hot! The load it up with the densest, knottiest, gnarliest hunks you can find - the density is key. Once they're on the hot firebed, close down the air and let them do their thing overnight. Come the morning you''ll have a warm room and a firebed ready for the day. Opening the door delivers 'Top air' - that's air that mixes with the volatile gases coming off the wood, burning them in a top flame. For a long burn, you need just enough 'bottom air' - air flowing through the grate, up through the fire for complete combustion. BTW - I really like your stove! That big window is superb! 🙂

@idamandahomestead4221

2 жыл бұрын

Thanks, your description is awesome! I love the fact that I can start it again right away in the morning. Still a beautiful bed of hot coals under the ash. Happy heating!

@chupacabra1765

2 жыл бұрын

You mean hearthily agree.

Very nice video, thank you very much. Just put an old Jotul cast iron stove in my basement and it heats the whole house, but I’ve been having a hard time keeping it stoked for the entire night. Going to try this method tonight.

This is the best video I have watched regarding putting together a successful and efficient overnight but. Thanks!

@sooosooo100

2 жыл бұрын

But what 😗

Such a thorough helpful video. I appreciate all the attention to detail.

Thanks, wanted to see it in the morning

@idamandahomestead4221

5 ай бұрын

No problem 👍

Thank you just got my epa wood stove, waiting on my mobile home install kit to arrive but tomorrow putting my hearth together and putting up my imperial wall shields. Great vid thank you.

Nice video! Similar to what I do but I rake all the coals forward so you get that true front to back cigar burn. I also don’t leave door open, no need if draft is good

Really good video , I learned a lot. Just installed a Hearthstone and am happy with it. Going to use your techniques for an all night burn. Thanks

What i would give for this style of wood burner stove. Absolutely fabulous to sit and look at the front glass section. So relaxing and the little fan blowing the air out also is amazing. Unreal .

@idamandahomestead4221

Жыл бұрын

It's funny you know I used to dread winter, but with the wood stove I really look forward to it. A blanket, a book and I'm good! Thanks for watching!

Doing that for 50 years and that approach is perfect procedure

@idamandahomestead4221

2 жыл бұрын

Thanks!

This is very helpful! Thank you!

Thanks for doing this. I’m with your method, for the most part; with the exception that I get a longer burn by using two of the largest dense full ‘rounds’ I can squeeze in on top the bed. If the bed of coals is a bit shite, I may put 2 or 3 small splits on top the bed first.

@tjlee9901

Жыл бұрын

i had a nice full round of dense fir burning all yesterday and its still in there this morning about 18 hours later .

New to wood heating, so thanks for the visual demonstration of stacking for an overnight burn. With this crazy cold front, I'm learning the hard way that a heat pump just isn't enough in negative temps, so it's a crash course in wood heating!

@idamandahomestead4221

Жыл бұрын

I totally agree, we just put in our heat pump this fall and are trying to avoid using the electric auxiliary heat. We find the heat pump doesn't do enough below freezing temps and can only keep the house up to 15 or 16deg C. With the stove we can get it much more comfortable. Thanks for watching!

@cjjillian1958

7 ай бұрын

I just moved to Mount Shasta and my heat pump went kaboom. A new one will be installed in January. I am down to my wood stove and boy - you have to learn. I love the heat it provides. A question I have is - after you put that big dense log on the hot coals, must you see fire dancing from that log before you are comfortable with the settings? Still learning!!! And I don't have the damper... only a push pull vent on the bottom

@ScottiveNatish

6 ай бұрын

Hey@@cjjillian1958 did you get it figured out? I haven't mastered the all night burn yet 🙂

Good information and well done. Thank you.

Thank you for the helpful advice.

More properly the air intake rather than flue, but great video, and you can see the secondary burn tubes working well. This is the secret to a long burn I believe, burning/lighting up the volatiles in the smoke, via secondary burn. This means your logs aren't being consumed as quickly. In the bad old days before secondary burn all those volatiles went up the flue as smoke and creosote. Any stout glove like those cheap pigskin leather gloves from handyman and gardening stores will allow you better access to a hot stove as you load it up...

@wlan246

7 ай бұрын

Was going to mention the same thing. If there were a flue, it would be in the chimney/stove pipe. It looks like this is a Regency stove, not sure of the model. Ours is a 2500, with catalyst and electric blower, installed last year to heat our house full-time. We always use this loading technique, which keeps the catalyst up to temperature so we can keep the blower on "high" and get the most heat out of each load. At least once a week, we have to let the coals burn down to ash to reclaim the space in our stove. We try to do that on a sunny day when we don't need as much heat, because getting the stove back up to temperature takes a bit longer; the first load becomes the bed of coals for the next overnight burn. It's good to see that others are doing it the same way! Remember: wood heat is both renewable, and carbon-neutral!

Wonderful instruction. Great fireplace

nice wood-burning stove, nice tip, thanx for the upload.

This video is super helpful !

Very helpful, thank you.🙏🏻

This fire pit is one of a few covered pits that is on the list kzread.infoUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.

You can see the secondary burn pipes are working just fine and efficient.

Great video! Very cool! THANK YOU!

Enjoyed the video very informative

Cool thanks for the tips!

I liked the video and subscribed as a result. I immediately thought gloves, I’ve burned knuckles, but you’ve heard that often enough! Thanks ❤

@idamandahomestead4221

5 ай бұрын

Haha, yup gloves are a good idea! I don't use them when loading just a piece or two but I do normally use them when loading up for the night. Thanks for the comment and the subscribe!

Thanks for the demonstration it seems to be a nice unit thinking about getting one like that for my house. Now, in my shop, I have an old 1920 rugged wood stove, and it burns for a good 10 hours loaded with seasoned wood. Hey take care and God bless

@idamandahomestead4221

7 ай бұрын

Glad it was helpful!

Great video

Thanks for the video, I've been wondering about this for the first time this past winter and am still burning now even in March but less so. My stove is not that big and does not have the same flue mechanism so I'm not sure this will work but I'll give it a try. One crucial thing I've done which has been great is I finally started wearing leather work gloves while tending the stove at all times, no exceptions, it's made a world of difference in not having beat up and sometimes burned hands, and it makes handling hot coals and logs so much easier.

@idamandahomestead4221

3 ай бұрын

Haha, yes since making this video I always wear gloves when stacking the stove for overnight. It was a bad habit I got into not to use them, because my dog has a thing for leather gloves. He's eaten a few when I forget and leave them out. Sigh. Anyway, I use them now! Thanks for the comment!

A tip for loading the wood into a hot firebox so you don't get burned: wear a pair of heavy leather welder's gloves and you can load the wood in a more leisurely fashion. I agree with the 'perpendicular' stacking of the wood in the stove, it seems to be easier to get a hotter burn. Sometimes, I'll lay the bottom row in a perpendicular fashion and layer 2-4 pieces horizontally.

@idamandahomestead4221

6 ай бұрын

Thanks for the comment, I do have a pair of gloves but my dog tends to eat them so I got out of the habit of using them. Definitely a good idea though! That's an interesting idea about the perpendicular and horizontal stacking. Any reason you choose one over the other? I have always found I could fit them together better perpendicular.

Great tips. I try to accomplish the same affect by putting in the largest round possible (22” diameter and 9” tall). I cut some of my wood in very short pieces (9”) which also keeps me from having to split these. Gary

@idamandahomestead4221

Жыл бұрын

That’s a great idea! I will tell my husband to try to cut some like this the next time we take down a tree!

thumbs up in support of your channel thumbs up

Thanks so much for the tips!

@idamandahomestead4221

7 ай бұрын

You are so welcome!

awesome very well explained Cheers :-

Best thing I did was to connect an outside air connection for combustion air. After burning firewood for 20+ years I finally decided to install an outside air kit. I used to feel cold even with the wood stove roaring. I finally realized it was due to a draft from the indoor air being pulled into the stove. The humidity also went from

@idamandahomestead4221

Жыл бұрын

That’s a good tip. From what I understand external air kits are needed when your home is newer or really well sealed. We have been working to seal our house better as it’s rated as pretty leaky. So, at the moment we don’t need an external air kit. Maybe one day!

@squirlnutsbigsack4864

Жыл бұрын

I couldn't agree more the difference in heat retained in the home is staggering. My stove suddenly heated my 2000 square ft house like it had doubled its output.

@squirlnutsbigsack4864

Жыл бұрын

@@idamandahomestead4221 there's more to it than that. A fire requires a flow of air it will not burn in a vacuum. The idea is with a fire burning and pulling air from inside the building it literally pulls cold outside air in to replace what the fire burnt and sent up the chimney. If you draw directly from outside there is no exchange of air happening in the building as the fire is drawing from outside consuming what it needs and sending it back outside. This increases the overall efficiency and effectiveness of your heater dramatically. Edit sorry for the long post and i load my stove the same for the overnight 👍

@idamandahomestead4221

Жыл бұрын

@@squirlnutsbigsack4864 that's really interesting, I will have to look into this! I had understood that as long as your house isn't airtight you didn't need one. But, I will definitely check it out because I am all for increased efficiency!

@squirlnutsbigsack4864

Жыл бұрын

@@idamandahomestead4221 👍

great nice fire, perfect gasification when only top flame is burning, bottom charcoal is just heating wood and supplying the gas

thank, you for you're video

Hopefully you have a good flu gas thermometer in your stove pipe. Also, be careful when you open your stove door, that the overhang doesn't go beyond the protection on the floor. I have seen an ember stick to the door, and fall off the door onto unprotected floor surface. Can be very dangerous. Happy heating.

@idamandahomestead4221

2 жыл бұрын

Thanks, that’s definitely important. We just had the installation of this stove done about 4 months to supplement our stove insert in another room. It’s WETT certified and has a large area of floor protection. I wouldn’t want one without that, too dangerous!

Gosh I can't wait! Have a propane fireplace in this cabin and planning another build on vacant land. Will have a wood stove in garage and pellet stove in living room. I cannot wait for that quality heat that gets into everything.

@idamandahomestead4221

Жыл бұрын

Yes, the radiant heat from the Woodstove is just so nice! We usually end up all sitting around it reading or talking. Makes the winter more enjoyable!

Thank You.

You can always add a dampener to the flue pipe for additional things to fiddle with. They do actually help control airflow especially when it’s very cold or windy.

@idamandahomestead4221

Жыл бұрын

We are pretty sheltered from the wind where we are and I haven't had trouble with this. I did think about getting a dampener in the stove pipe more as an emergency back up in case I need to put out an overheated fire. This is especially so since the EPA rated stoves are not airtight. Thanks for the comment!

I also controlled the amount of fresh air intake to slow burning. Lastly I would save y-sections of wood ( where the trunk splits). Split them and put one in the stove at bed time. They burn more slowly and I'd still have hot coals or flames in the morning.

For the last 16 years we've been using a buck fireplace insert that was in our den when we bought our home. It's in a closed off nook of the house and is ok as long as it doesn't get stupid cold outside,but we're now getting more serious about wood being our sole heat source. We bought a used fisher grandpa bear stove and we're installing it in the center of our house. The firebox is 24" wide,18" deep,and14" high. They have a reputation as being a long burning fairly efficient stove( for what they are). Its top is 5/16 plate steel,it weighs about 500lbs,and has an 8" flu. I live in West Virginia so our winters are hit and miss as far as cold and snow go,but I figure I'll burn about 5 cord a year on average. Hopefully I'll be able to get long overnight burns in mine. Most agree that in my stove 10 hours is reasonable. I'd be happy with eight hours as that's about all I sleep anyways.

@idamandahomestead4221

Жыл бұрын

Sounds good to me! I think each stove has it's own personality and I am sure you will be able to figure out how to get those 8 to 10 hour burns. That has certainly been long enough for us. Thanks for the comment!

Very helpful video!!!

@idamandahomestead4221

5 ай бұрын

Glad you think so! Thanks for the comment!

That’s a really nice stove, mine is an older one but once my night sticks start burning good I shut it down and always have coals next morning for next fire.

@idamandahomestead4221

Жыл бұрын

Yes I love that! Wake up, throw some kindling on, splits on top and it flares right up!

Welder Gloves are really good

Glad this video popped up in my feed, i will give this a try! Not tonight, though, as we're going down to -15, and my usual technique works as long as I have the right sticks. Normally, I set aside the biggest and knottiest logs and load the stove with them in the usual way, leaving space between and then placing the next layer across the lower one. We have a very old stove - 1982 - so it is anything BUT efficient (it was free, though!) and the fire tends to cool right down or even go out if there isn't adequate spacing between the sticks. So, I'll give this a shot on the next not-so-cold night, since my man really likes splitting the wood small 🤦‍♀️ Small sticks are nice for getting it going, but then we're feeding the damn thing every half hour or so because they just burn too fast! Ugh, all these people saying, "gloves"... Not practical for the most part - heck, we have a pair of MIG welding gloves handy - but yeah, if you don't have a fire poker (which you do), then they're not really all that necessary unless the poker just isn't cutting it and you need to go in with your hands and they're not fire-hardened yet. I think i may have used the gloves once over the past few years?

@idamandahomestead4221

5 ай бұрын

Haha, thanks for the comment. I do agree with you that I rarely use the gloves at any other time. However, they do work better when loading the stove this way at night. I just have to keep them hidden otherwise my dog will eat them and so I forget about them! Let me know how you do with your over night burn, I agree that the big knotty pieces are good for longer. I always want a selection of piece sizes but doesn't always work out that way! Happy wood heating!

Good job👍

@idamandahomestead4221

7 ай бұрын

Thanks!

Thank you for this clip, is it possible to load the wood in this same manner also into a "sandstone" fireplace (the kind of fireplace which stores heat into its structure and stones/tiles? And since the logs are being captured on video while burning, are they vlogs? 😁 Thanks again and best greetings!

great thanks

I’ve had a high efficiency Regent wood stove in Canada for 20+ years. In exchange for the long burn, you are sure to get creosote buildup. After a while, you risk a chimney fire, especially when preheating as per the video. (One commenter said the chamber was getting up to 1000 deg.) Get a thermometer and be sure the chimney is not overheating. Second, if you do this a lot, clean the chimney a couple of time a heating season until you know how much buildup you are getting.

@idamandahomestead4221

7 ай бұрын

I definitely agree that you need to monitor for creosote buildup as well as your stove burning temp. I do have a stove thermometer and it never gets over 700 deg with this method. We do also have our stove cleaned yearly and they have told us we are using good burning methods. You definitely need to keep an eye on that though! Thanks for the comment!

Thanks, I’ll do this method.

@idamandahomestead4221

7 ай бұрын

Let me know how it goes!

Thanks

I can shorten this up a bit: Create the bed of coals using smaller pieces of wood. Damper your flue (I just call it the air intake) down to a minimum and then add REALLY large pieces of firewood. At least two three is better. Then go to bed. I've used this approach for thirty years with my Pacific Energy Spectrum stove with great results. I only burn birch firewood. Sometimes it's seasoned for a year other times just a week or so. I have a straight vertical chimney about 10' in length and have never had to sweep the chimney for creosote.

@johnnyelectric4844

Жыл бұрын

I am john in bc canada ,, do you take the bark off ? I understand it relly messes with the pipes , I take what i can EASY and the rest i burn

@idamandahomestead4221

Жыл бұрын

That’s interesting about the bark, I haven’t heard that. We just burn it all. I will look that up though. Thanks for watching!

@jimzeleny7213

7 ай бұрын

@@johnnyelectric4844 Just leave the bark on. It burns fine.

@mrbluefalcon3298

7 ай бұрын

Hey Guys I'm new to wood stoves. How do I follow this process without having a "run away stove". I tried this or something similar by packing it full and my stove top started to get a red spot. I freaked out and read to open all air and the stove door to allow cool air in and that worked but I of course lost the wood because it burned in a couple of hours.

@markdworak2170

6 ай бұрын

You should be able to control the fire by closing down the air intake and the damper. If your stove doesn't have a built in damper, you can put one in the stovepipe. The magnetic thermometers are good to tell you when to turn things down. It takes some experimentation to figure out . Good luck!

Masonry stove .. build a fire, keep it going about 4 hrs. In 2 hrs you can notice some temperature difference between stove and room .. And then .. 4 tons of red bricks stays warm for long time (once heated up)

The way my Fireplace Insert is configured, I have to load East to West. It has a shallow 14” depth. The only way I can fill the fire box front to back is cut my firewood to 12”, which I do at times. East to west the fire box will except a 24” piece of firewood. Nice video👍

@idamandahomestead4221

2 жыл бұрын

Yes, we could put a longer piece east to west, but I would have to reach further in which would be more difficult. I have welding gloves now so maybe I’ll try it!

@nataliebutler

Жыл бұрын

How do you cut the wood down? I will need to do this for a small stove but I'm unsure what's the best way to do it.

@aldiminico6513

Жыл бұрын

@@nataliebutler cut the same way you would at 16”, except cut and split at 12”, or even smaller if you need to.

...I have no idea who this woman is and this is my first encounter with her channel. That said, her idea for how she wants to set the stove up for the overnight burn certainly seems logical to me and she presents it very well. It just makes sense, doesn't it? I just wish we came back the following morning to see the results... no matter, still a thumbs up.

@idamandahomestead4221

Жыл бұрын

Thanks for the comment! I didn't think about doing the next morning! It usually is still hot glowing coals and the fan is still throwing out heat. I put some kindling on and it just flames right back up. That's after about 12 hours. :)

@MWWISH

Жыл бұрын

Dayum no, I doubt that stove is built to be able to Run on over 10kW 🤯

Love this video and all the comments. Something not touched on is stove temperature. Loading the stove like that in a steel made stove with damper open you have to be careful with an overburn. Too hot means the stove can warp. Cast iron is better for that but takes longer to start up, and is more $$.

@idamandahomestead4221

7 ай бұрын

Hello there and thanks for the comment. It's true I don't mention stove temp in this video. I do have another video that talks about using a stove thermometer to create safe and efficient burns. Very true about wanting to overfire your stove. I think if you're planning on doing an overnight burn a thermometer is a necessary piece of equipment and I probably should have addressed that in this video. Have a great day!

@WeatherNut27

7 ай бұрын

@idamandahomestead4221 Thanks for the reply. Im curious on what I should do when it is overburning. Open door to let more heat out or just close damper and let it go

Thanks for that I’ll try that

@idamandahomestead4221

7 ай бұрын

Thanks for the comment, let me know how it goes!

Put a 152000 BTU vogelzang in our house 2600 sq. ft. in 2013. Electric bill went immediatly to 65.00 per month through the winter. We have not turned our heat pump on since 2013, and you can adjust this stove to keep your home about whatever temperature you are comfortable in. Also whenever power goes out in the winter you have light from the stove and you can cook and heat water. Old habits hard to break.

@idamandahomestead4221

Жыл бұрын

Yes, we have just taken out our gas furnace and put in a air heat pump. We are hoping to only use it a little and rely mostly on the wood stove. We are lucky to have woods to supply our wood. I have boiled water on it too!

@jmanyoo3305

Жыл бұрын

I have the same stove and if I put more than 4 pieces in it the fire starts rolling rapidly and over fires the stove even with the damper almost fully closed. What do you do that I’m not?

@idamandahomestead4221

Жыл бұрын

@@jmanyoo3305 sorry for the delay in replying I missed this comment. I am not sure what the difference is. You could maybe try full logs? I have seen several comments that this reduces the temp of the burn. I am going to try that too. Let me know!

Ty Amanda

Would of liked to seen the fire The Next morning, great video tho thanks for quality content!!

@idamandahomestead4221

2 жыл бұрын

By about 10 hours later it is lots of hot coals under a thin layer of ash. Then i just put kindling and splits on top and it starts right up again!

Really good video, Amanda. This is the best way to burn overnight with a 2020 EPA stove. I can see what looks like gas jets of flame at the top of the stove. I know these are where the pre-heated air mixes with the vaporous fuel. This fuel used to go up into the chimney and become creosote. Now it's being burned in the stove. The new technology has a bit of a learning curve, but you've done a great job of helping people figure it out. If you plan on cleaning your chimney yourself, please let me know. I'd be happy to give you some professional tips. (btw I'm a NFI Certified Master Hearth Professional.)

@idamandahomestead4221

5 ай бұрын

Thanks for the comment, I really appreciate it! I can't say I am ready to try cleaning out my stove on my own, but I will let you know if I change my mind!

Awesome

Thankyou.

@idamandahomestead4221

Жыл бұрын

Welcome!

When I first started burning wood I'd always hear people talk about "banking the fire" for an overnight burn. I did this for the first few years, but since I cleaned my own flue every year I saw just how much creosote can build up if the fire (therefore the flue) isn't how enough. I have a masonry chimney with a terracotta liner. Best thing I invested in was a thermometer for my stovepipe. I like to keep my temp around 400 degrees. I'd rather have to get up in the middle of the night to throw wood in the fire than burn a cool, smouldering fire.

@jasonfoster9118

Жыл бұрын

Absolutely. After you burn wood for a few years you can just tell when it's hot enough but someone new to it will try to burn green wood and end up with a flue fire. I never really have to clean my flue, just open the tee in the pipe over my stove and vacuum out the burned creosote that falls down on the baffle plate of my stove.

@idamandahomestead4221

Жыл бұрын

Thanks for the reply! From what I understand banking a fire involves putting a layer of ash over hot coals/wood to partially smother it and really slow down the burn. I think it would not therefore generate much heat but would preserve hot coals for the morning. What we are doing is keeping the fire going but at a slower rate. I have a woodstove thermometer to help me make sure it doesn't get too hot or cold. I try to keep it out of the creosote range. I have another video on that too if you are interested. Other thoughts/suggestions welcome!

nice for the neighbours!!

Thanks for the informative video. How do you like your Regency stove? We're planning on installing a wood stove sometime this year and still undecided on which brand to get.

@idamandahomestead4221

2 жыл бұрын

We like it a lot. It’s a Canadian made stove too so you can be more certain of the quality. It heats our whole house which is over 2000 sq ft even when it’s below freezing.

@ritaranee4787

2 жыл бұрын

There is a demand for these sturdy wood stoves here in NE India

Fire gloves work great!

@idamandahomestead4221

6 ай бұрын

Yes they do! I have some but got out of the habit of wearing them. My bad!

Question: Should I use the primary air vent or secondary when getting the fire hot? I have three sliders on my fireplace: Primary, secondary and tertiary. Thanks a lot for the video. I have a Northern Flame Azar multifuel fireplace; I’m just acared of overburning if I it heats up as much as yours did.

@idamandahomestead4221

Ай бұрын

Hello there! To be honest I am not sure of the answer to your question. I have only one air intake to adjust. I would think if you look up the instruction manual for your stove it should help. As far as the stove overheating, that's why I use a stove thermometer over the firebox to make sure I am keeping a safe temp. Good luck!

Hi Amanda, it has been really very useful and illustrative. Thank you for the nice video, i wonder what is the stove model you have?

@idamandahomestead4221

Жыл бұрын

It's a Regency F2450 which is a Canadian brand I think. Not sure what country you're in but it's a good one if you can get it! Thanks for watching!

Nice... thank you so much for posting. I didn't read the prior comments (sorry) but have you ever put the wood in East to West, rather than North & South like you did in this video. I heard that by putting the wood in lengthwise (east & west) you get a longer burn time. Experiment. thank you.... and happy wood heating..

@StubbsMom

Жыл бұрын

I prefer shorter pieces put in North and South, only because when I have longer pieces and put it in lengthwise, they tend to roll off and lay against the glass. Then there's this whole having to barely crack the door so I can reach in with the poker and scooch it over!

@hairlessmonkey2240

8 ай бұрын

Correct. Wanted to point this out too. With the grain contradicting the natural airflow of the stove all wood will burn slower. I just use larger rounds so the buggers can’t roll. We can’t get an all nighter with subalpine fir any other way but, if it works for others then that’s great. Thanks for the vid!

Flue? I think you are talking about dampers... a flue is the stove pipe, chimney, etc that allow smoke and gasses to leave the fire.

@idamandahomestead4221

7 ай бұрын

Yeah true, it is the air intake and not the flue. It's a old habit from having a flue on an open fireplace, got used to calling it that. Sorry and thanks for the comment!

Very good video. The hot bright spot in the center bottom of your stove looks like an air leak. On my stove that indicates the rope seal around the ash dump drawer is ready for replacement. I don't know if that applies to this stove or not. Thank you for your video.

@idamandahomestead4221

Жыл бұрын

I don’t have an ash drawer and haven’t noticed a leak. I will use a smoking stick to check for leaks though. Thanks for the advice!

The lever your calling the "flue" control is actually the air intake. These stoves have no flue dampening. You should have a way to monitor either the stove temp or flue gas temp, over firing can cause damage and under firing will cause excess soot. These stoves work by way of a secondary burn. When you reach a certain temperature that's when you'll see the tubes at the top look like gas burners ignite the unburned smoke (wood gas) for a more efficient burn and a cleaner stove. Use larger pieces for longer burn times. For my overnighters I use well seasoned hardwood at 11"x7"x16". I can get 10-12 hours of good heat but will still have coals after 16 hours.

@idamandahomestead4221

Жыл бұрын

That’s a good idea, I have asked my husband to leave some full logs that are stove size the next time we take down a tree. Our chimney cleaning company has always said we are using good burning practices, always room for improvement though. Thanks!

@tcap7917

Жыл бұрын

@@idamandahomestead4221 Just keep in mind that bigger logs take longer to season. With mine i season the oak "overnighters" 2 years.

Nice job. Everyone should be careful tossing logs into the fire box if you slam them in to hard you will crack your fire brick.

@idamandahomestead4221

2 жыл бұрын

Yes I agree, I've found welder's gloves now and that makes it much easier and safer!

This is great, thanks. I'd like to see what your fire looks like when you wake up in the morning.

@idamandahomestead4221

Жыл бұрын

Thanks for the comment. Yeah I guess I should have filmed it the next morning! Usually after 12 hours it’s a bed of glowing coals but no flame. I just add kindling and it flames back up immediately. Thanks for watching!

@jefffeldman3861

Жыл бұрын

@@idamandahomestead4221 Thanks for responding!

@idamandahomestead4221

Жыл бұрын

@@jefffeldman3861 I just posted a video showing the next morning if you want to check it out!

@jefffeldman3861

Жыл бұрын

@@idamandahomestead4221 Thank you! I will look right now!

What kind of fan on top? That would help distribute heat better. I love ❤️ this. Thank you.

@idamandahomestead4221

Жыл бұрын

That is called an Ecofan. I have a video on how that works if you want to check it out. It’s also great if we have a power outage because it doesn’t use electricity. Thanks for watching!

As a 2020 certified EPA wood stove it is very close to air tight. The reason the stove works with the damper fully closed is that secondary burn tubes have their own air intake that is always open. Also, hard to tell from the video but it looks to me that fire burned too hat for too long. Get yourself a stove thermometer or an IR gun and make sure the stove does not go over the manufacture’s specs. I’m guessing that fire was burning well over a 1000 degrees for a while.

@idamandahomestead4221

9 ай бұрын

Hello there, I actually do have a stove thermometer and the temp does stay within the safe range. I completely agree that if you are going to do something like this you don't want to over fire your stove! Thanks for the comment!

Great tips! Thanks. Just installed a smaller Regency stove in my cabin. Do you like the electric fan unit? I bought mine without it. I’m debating investing in one. ✌️

@idamandahomestead4221

Жыл бұрын

I really do like the electric fan, it makes a big difference in moving the air. The cost of the electricity is negligible. The high speed of the fan is loud so we mostly use the lower speed unless we want to heat the place really fast. Thanks for watching!

I would like to hear some advice on the stove top fan you have. Type of metal, number of blades, brand, etc. My stove has a built-in electric blower, but I would like to add the top heat-driven fan.

@idamandahomestead4221

2 жыл бұрын

That's a good idea, I should do a segment on that. It doesn't move as much air as a blower even when its on low. But, it's good secondary option especially if you have a small area to heat or if the power goes out!

I find using the largest stick of wood that can be pushed through the stove door works best for me,sometimes a smaller one or two underneath, I have an electric wood spliter in woodhouse, can get size of wood as needed.

@idamandahomestead4221

7 ай бұрын

I do that too if I have big whole logs, just get it burning hot and then shove a log in. This is a nice method if you just don't have bigger pieces. Thanks for the comment!

I agree with this method! Can you tell me what kind of fan is on your stove please? Thanks!

@idamandahomestead4221

Жыл бұрын

It's an Ecofan, I actually do have a video that shows how it works. Uses something called thermoelectricity so it doesn't need a battery or to be plugged in. Great for when the power is out. Thanks for watching!

Well done, the other watcher is correct to invest in a pair of wood stove gloves, or welder gloves. But interesting the difference in changing how you put the wood when loading for the night.

@idamandahomestead4221

7 ай бұрын

Yup, I have a pair but they're leather and my dog will eat them if I leave them out so sometimes just don't use them. Thanks for the comment!

I know you hate nit pickers, but technically what you are referring to as the flue is actually the draft. The flue is on the stove pipe. Otherwise very good video. I am going to try your suggestions and see how they work for me. Thanks for helping those of us that are trying to find more efficient ways to operate our wood stoves!

@idamandahomestead4221

Жыл бұрын

Yes, thanks you are totally right. I think I sometimes use those terms interchangeably but they are definitely not the same thing. Sorry about that!

What brand and model stove is that? Also brand of fan? I haven't seen many good reviews on those fans.

@idamandahomestead4221

2 жыл бұрын

It’s a Regency F2450 and it’s able to heat our 2500 sq ft home with the furnace fan on to circulate the air. The fan is an Ecofan. Not sure which model. I read that it circulates the air twice as fast as without a fan. There isn’t tons of air flow so it’s more our back up system. Thanks!

I don't know how cold it is where you are or what your draft is like but I have heated my house for 30 years and I don't do all that and think you burned off a lot of wood that could have burned longer into the morning. Good bed of coals absolutely, but then I just pack it as tight as I can, shut the air down the max cuz my 30 year old VC stove is not air tight anymore and it burns all night from 9:30 pm to 6:30 am. I guess what works for you works but it isn't how I do it and like I said I've been doing this for a long time.

@idamandahomestead4221

2 жыл бұрын

I guess it depends on the weather and the size of the house. Our house is over 3000 sqft and weather gets down to minus 20 celcius sometimes. So, a little bit cold here!! Stove does great though!

@tomgee2719

2 жыл бұрын

@@idamandahomestead4221 It gets that cold here too but my house is on 1 level and is 1500 sq ft. Have you ever just kept loading wood into it vs letting it all just burn down to coals so that about 30 minutes before you go to bed you can add a couple of logs to fill the stove vs having nothing but coals and having to spend the time to build the fire? I'd bet that takes a good 15 to 30 minutes. For me, when it is time to hit the sack, I don't want to spend any more time than it takes to go outside, grab a few pieces of wood and shut down the stove for the night.

Anyone reporting burn times....this is a regency F1150 with an airmate. I have a brand new one in my basement, no matter how I pack it, I get 3 to 4 hour burns, maybe 2 hrs. if I just fill half way. These are great because the firebox seams are factory welded, made in Canada. Nice stove for the price, will last a long time.

@idamandahomestead4221

Жыл бұрын

Hello there, I also have a Regency stove but it is a bigger one. I would think you should be able to get a longer burn that 3-4 hours. Have you tried getting a really nice bed of coals then placing full (unsplit) logs in there wedged together? You can then put splits in just to fill the gaps. That should burn slower especially if you slowly close the air intake. Thanks for watching!

Nice video. Where did you get the fan on top of your stove?

@idamandahomestead4221

Жыл бұрын

It’s called an Ecofan and I got mine from a local garden supply company, Lee Valley. You can order them online too. I have a video about how it works if you want to check it out. Thanks for watching!

Do you use a stove top thermometer so not to over fire your stove?

@idamandahomestead4221

2 жыл бұрын

I haven’t used a thermometer, I just make sure that the flame isn’t too big and a darker red so it’s not so hot.

Love my wood stove, but every year I DO brush the chimney to remove Any creosote. And my wood has been dried in my drying shed for at least a year after being split. You never can be too safe!

@idamandahomestead4221

7 ай бұрын

Totally agree!

I have the same stove!! Very nice video, thanks for sharing! I was wondering if you had the same problem I do, with the thermometer hitting the double wall pipe?

@idamandahomestead4221

5 ай бұрын

Hello there! I do have a double wall pipe, so my stove thermometer is one that is designed to sit on the stove top. I didn't want to get one of the ones that you drill a hole into the pipe. Seems like lots of potential for me to damage something! What do you do to measure the temp?

@kylered1268

5 ай бұрын

A thermometer into the pipe came with mine, but it sits up against the pipe and the part that moves hits on the pipe. I’m going to try throwing a little spacer in it!

As a chimney sweep i can trll you that damping down the stove leads to a dirty burn...ya gotta leave some airflow so the smoke can get out of the chimney before it cools down and condenses into creosote.

@idamandahomestead4221

7 ай бұрын

Totally agree with your comment, our stove is EPA rated and so isn't completely air tight. We do have the stove cleaned yearly and they have told us we are using good burning practices. Thanks for the comment!

We use a stuff called sea coal in the North of the UK it washes up on the beaches its basically coal that is washed out of the seams and old mines in the sea bead its like a fine or gravel looking it burns for hours even put two shovels on before bed and it burns hot and slow next morning stoke it and off she goes again 😎

@idamandahomestead4221

Жыл бұрын

That's super cool, I had never heard of that!

@mrdynamic7887

Жыл бұрын

Yeah just put seacoal in KZread and it tells you and shows you the process of where it comes from it's the best I've ever seen for a fire🔥😎

Nice video would this work if my wood stove goes long ways the other way if you know what I mean

@idamandahomestead4221

2 жыл бұрын

Yes, it would for sure work. Do you load from the side or the front?

Just out of curiosity, what length blogs were those? Very good video. Thank you.

@idamandahomestead4221

6 ай бұрын

We don't generally measure them but they're probably about 18 to 24 inches long. I usually have a few inches open at the front. Our firebox is about 27 inches deep. Thanks for the comment, have a great day!

@craighellberg4366

6 ай бұрын

Thank you for the info. That is a deep firebox. Mine is 27 inches wide, but not that deep. I would much rather have one like yours. We are looking for a new one, so you gave us something to consider. Just found your channel and I have been binge watching all of your videos. Thank you so much!

Have you east-west instead of north-south??? It is suppposed to burn a little bit slower. Try it out!!!

This is a GREAT video on how to leave a wood stove overloaded and unattended...and at risk for over firing. U arent really supposed to pack as much wood as possible into stove. I actually tried what this woman does in my buck 74 and was rewarded with a glowing stoce that was about 1000 degrees surface temp. DONT DO THIS.

@idamandahomestead4221

11 ай бұрын

Hello there, I'm not sure what kind of stove you have but this consistently works well for me. I do have a stove thermometer and using this method the stove is in the safe burning range of under 700 degrees Fahrenheit (stovetop temp). Good luck finding a better method that works with your stove. Thanks for the comment.

Hi, is this the new 2450 from Regency ? Nice video Thank you

@idamandahomestead4221

2 жыл бұрын

Yes it is, I have been really impressed with how well it heats. It’s able to heat our 3000 sq foot house even when it’s well below freezing.