How to load staples in the DeWalt 5 in 1 Multi Tacker
Тәжірибелік нұсқаулар және стиль
Are you having issues trying to load staples into your staple gun?
I have had a few comments about the loading of staples in the Dewalt DWHTTR510 Stapler Brad Nailer Multi Tool. So this video should help those of you who have been having issues with this, and finding it difficult.
The stapler loading mechanism does have a spring built in, so as soon as you insert staples or brads into the tool, it will hold them in place and ensure they are pushed forward ready to be fired.
MULTI TACKER REVIEW: • DeWalt Multi Tacker an...
BUY THIS PRODUCT ON AMAZON:
Dewalt 5 in 1 multi tacker: amzn.to/3oTYfFt (Amazon)
Staple Selection Pack: amzn.to/3qbfqTb (Amazon)
Brad Nails 15mm: amzn.to/3aFS3KI (Amazon)
CHECK OUT MY WEBSITE:
www.justinbailly.co.uk
TAKE A LOOK AT MY AMAZON STORE FRONT:
www.amazon.co.uk/shop/justinb...
ALSO CHECK ME OUT HERE:
Facebook: / justinbailly
Instagram: / justin.bailly
Pinterest: www.pinterest.co.uk/justinbai...
Email: justin.bailly74@gmail.com
As an affiliate, I make a small commission on qualifying sales
This does not affect the price you pay
Thank you for your support
Пікірлер: 148
Fast forward to 4:45 to see how staples are loaded. Thanks for the info!
@latoyahill1172
2 жыл бұрын
THANK YOU!!!!!!!!
@shaunnamarie4990
3 ай бұрын
Thanks
I felt stupid having to consult KZread to figure out what I was doing wrong, but this was SO helpful! I was trying to load the staples on the 'track' of the pull-out-thing, like a regular stapler. It never would have occurred to me that they would go in underneath and infant of it. Thank you SO much! And for what it's worth, I'm loving this thing--I'm upholstering some chairs with wooden bases and it's doing a great job!
@reesejohnson2788
5 ай бұрын
Same! I thought I had it all figured out, until no staples were coming out… 😂 🤦🏾
@SethDunbar123
2 ай бұрын
Same - could be called bottom-loader. All my previous standard staplers were top loaders.
This should not be 10 mins. But thank you lol.
@cicada3312
2 жыл бұрын
Agreed!
@jcali1323
2 жыл бұрын
Right! 🤣 just get to it
@HellaReckless
2 жыл бұрын
@@jcali1323 man lmao. Just fucking up their analytics. Cause everybody skipped forward
@dottiedavis355
Жыл бұрын
Yes. Way TMI on the spring.
@reesejohnson2788
5 ай бұрын
For the algorithm. 😂
I was just in Bunnings car park about to return something similar to this and quickly watched this it really helped saved me from waking in Bunnings looking like a idiot not knowing how to work this many thanks
Was so grateful for this video today. I found out the staples were in backwards. Once that was corrected the staple tacker worked like magic. Thank you.
*The 3 speed is good **MyBest.Tools** trying to keep to a low speed for a long time with just the trigger is hard.The only negative is I keep bumping the on/off switch when changing blades, not dangerous but annoying.*
@sethzimmerman6346
Жыл бұрын
These guys bots?
I feel so stupid! I just bought this exact stapler and started loading the staples...onto the plastic tray that you get when you open up the loading chamber. Who would have thought the staples are supposed to be loaded internally? Thanks, my man, you just rescued my sanity.
@dunfalach
8 ай бұрын
Last time I used a staple gun was my dad's old Arrow staplers and they had a fully removed slide, so I did exactly the same thing.
Home Depot had half one star reviews and half 5 star reviews. I knew something had to be up. The product didn’t have any instructions so I came here. Thank you for making the video, I followed your guidance and all my stapling came out perfectly.
@cmonaghan68
Жыл бұрын
Just opened mine yesterday and there is instructions sandwiched between the plastic and cardboard. I didn’t realize they were there until I took the packaging apart apart
@Raindeux
3 ай бұрын
@@cmonaghan68 I didn't realize they were there until I used scissors to open the package and cut them into pieces... and then had to sift through the mess... and STILL needed this video to get me going...
Thank you we was so confused about where to install the Staples we thought they went on top of the black bar
I never knew Chris Martin was such a staple expert! Thanks Chris!
I could not figure it out. Thank you for taking the time to show the details. I, for one, needed the step by step. Your presentation was perfect for me.
You saved the day, I was ready to take my stapler back, I had it loaded incorrectly, 😊 , thanks for this video
One of the best presentations on the net. Thank you.
😂 after watching it 3xs I finally got it. Geeeeez it’s going to be a long journey to learning tools. Rotary tool next. Ty for the video.
Thanks bud, I hadn’t used mine in 5 years and totally forgot. U da man!
@JBTV
3 жыл бұрын
Haha, cool man 👍
@joleneguerrero4794
2 жыл бұрын
Omg me too! I was putting it in wrong and thought mine was broken 🤣🤣
Thanks! Great help. I was loading it from the top like my old stapler and obviously it wasn't working.
Thank you I was wondering how to load the 15 mm nails and I got it from your video. Thank you once again
Great video I just picked the stapler up at a swap meet for $5 I got the five in one I didn't know what a good deal I had until I watch this video ...thank you
@lunv1888
Жыл бұрын
Dang, I got one of these, a riveter tool, and some fasteners all for 7.50 at the auction lol
Much Thanks, this tutorial was exactly what I was looking 4.
Man! I was like huh.....where is the freaking spring??? YOU are the man. Thank you!!!!
@JBTV
9 ай бұрын
Cool man 👍
Very useful, thank you
Thank you! This was very helpful
Cheers Justin,on route to Screwfix to get one,useful bit of kit to have .
Thanks for the help! I can use mine now!
Thanks for this video, I was racking my brain lol
Pretty straight forward. It helped me out. Thanks. I was also wondering how the +/- tension adjustment knob works. Maybe you could explain that so we learn a little bit more about this awesome tool. Thanks again.
@margaretbarbare
Жыл бұрын
Ty
Thank you. Very helpful
Great help!! Thanks
Good video, I would of liked to see the use of the increased power setting 😊
What can you tell me about the different crown lengths? With 3 different manufactured stapler guns, I found out not all staples are not the same.
Thanks for your help
Great information.
Easy leash thank you for your help
Great video. Thanks
Thank u bro i needed this i was about to return it lmaoo
Thank you!
Good review. Thinking of getting this and wondering what size staples it will take and if it will use generic staples or only Dewalt? Thanks!
@1Bane1
3 жыл бұрын
On my Dewalt I am using Arrow brand 1/4" 6mm T50 staples. On the box it says it will fit Dewalt, Stanley, Bostitch, and of course Arrow staplers. They work just fine and I believe, as long as the dimensions fit the ramifications of your stapler, any generic staples would work.
Great review! Except first two minutes which were some sort of advertisement for the stapler. Just got my stapler and loaded it completely wrong (as I used to load my old one).
Can someone tell me what the thin black switch at the base of the handle does?
Thank you ! Ya I was doing it wrong lol!
THANK YOU!!!😃
ANYONE KNOW WHERE TO FIND ASSEMBLY / DISASSEMBLE OF THIS? BEEN TRYING TO FIND SUPPORT. OPENED TO CLEAN JAM AND IT DID NOT OPEN EASY. GOT THREE TINY PIECES UNSURE WHERE TO GO
I came to this video to figure out how to load the common Arrow T-50 stables. They seem to be the in-between size for this gun. The slot for the stables has 2 "floor" levels. If the stables are the max size they drop in straight like in your video. I'd assume if you got the very narrow staples they would drop into the lower floor to the left. When I initially tried my T-50 stables they are not max size yet too big for either floor width. Turns out you need to put them in carefully so they lay flat on narrow right floor and don't tilt into the lower left floor. If they're tilted the side won't close. You really have to lay the gun on it side as you load to keep them from tilting over.
hell ya. im was loading it in the tray not the gun. thank you!
Yo the leader singer of coldplay is also handy!!! 🤯
Thanks!!
I bought this for my husband. He couldn't get it to work so I am looking at your videos for help. It seems to be completely missing the spring to push the staples forward. It has no spring action at all. Is it possible to see the spring in your gun because I cannot see the one in this one at all.
This actually works
Somebody wake me up when he gets to loading this gun please
Everyone who loaded them on the wrong side of the chamber raise your hand. 🙋♂ It's not loaded like say a red (or other color) Swingline or Bostich office stapler. I have an old something (name worn off) staple gun that has a spring that comes out and staples go in. Very common sense loading. Thanks, Justin. And no thanks to DeWalt for omitting instructions.
Thanks !🙂
Dewalt tools are never intuitively designed. You always need to consult external sources to find out how to use them.
Thank you very much!😅
Thanks!
Thank you ☺️
Thank you, Justin, nice & helpful video. Stay safe.
@JBTV
3 жыл бұрын
🙏
This should be a 20 second video come on man im on rural internet just need the answer
Thanks
Lifesaver!
Omfg that made me feel like an idiot. Thanks , it’s working now. 😂
As an electrician that does strictly remodels this is an absolute essential tool. kzread.infoUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI Being able to precision cut any material with a light weight tool is priceless.I upgraded to this Dewalt 20v from a competitor's 12v. The Dewalt 20v is just as light as the competitor's 12v. I am extremely pleased with the overall performance and battery life of this tool. As far as oscillators go, they just aren't very ergonomic tools. The dewalt oscillators have an offset handle that do make them somewhat more ergonomic than the competitors' oscillators.
Staples @4:30 Brads @7:00 thank me later
@Lu-db1uf
2 жыл бұрын
Is now a good time?
Fast forward about 4 mins in to actually get to the load process.
That was freaky, my name is Brian and I did buy the 2 in 1
@JBTV
3 жыл бұрын
😂😂😂
I thought my stapler was broken. My other stapler loads from inside.
I’m such a dope, thank u so much for the simple video
Is this easy on hand when squeezing the trigger?
@JBTV
3 жыл бұрын
It takes a little effort as its mechanical, but not hard work!
How do you replace the spring
@JBTV
3 жыл бұрын
No idea 😀 Maybe I'll publish a video when my spring breaks!
Mine won’t catch it just squeezes with no pressure
Thanks 🤩
@JBTV
9 күн бұрын
Cool man
3:41 you’re welcome friend 👍
@cmurphy3748
3 жыл бұрын
MY MAN.
I bought one and returned it because I thought it had been defective and I see that it was because I did not know how to use it 😅
10:00 video !!!! On how to use a staple gun oh my geeeez
Hi, is the size of this tacker suitable for smaller female hands? Or is it for big blokes?
@JBTV
Жыл бұрын
Haha, I'm no big bloke!!
Thanks! I was loading from the slide rail. This design is truly brilliant once you realize how to load it. Lol. Cheers. 🇺🇸 Edit: I must say... This stapler is powerful. I just used it to staple steel to wood and it shot all the way in and bent around the steel.
Takes talent to stretch a 4 second video into 11 minutes.
My mode switch is a bitch to move! I have to get my husband to do it with arthritis and can't budge it. Did I get a lemon?
Holy shit I'm retarded. I was placing the staples on the other side of the slider. They fit so nicely it just seemed right.
This should be 30 seconds tops
3:17... talk about burying the lead... SHHEESSSH dude, stop the fillabuster!
Except that there's a red plastic guide that prevents the staples from being loaded. Nothing in the instructions about that. Took it back to HD and got an Arrow.
@Lu-db1uf
2 жыл бұрын
That's the spring part that pushes against the staples so they're in proper firing position.
@captaintightpants581
2 жыл бұрын
@@Lu-db1uf Yes and that's Where it stops. Staples don't slide in and rail doesn't close. And guess what? Nobody at Home Depot could get it to work either!
@JR-px9gp
Жыл бұрын
@@captaintightpants581 i have the same issue i dont understand this
Zero information until finally 2:33 into the video
Over ten minutes on how to load a goddam stapler
Wow. 😅
Nope. I’m not having it. I just bought one and none of the staples would even fit in the little slot. Even the office staples! He just dropped them in. 🤔
@JBTV
3 жыл бұрын
Hmmmm, that's odd. Dewalt do a very similar model that only takes heavy duty staples. Is this definitely the same model?
@kelseaarcher8478
2 жыл бұрын
I am having the same problem as well.
@Danster547
2 жыл бұрын
@@kelseaarcher8478 hey! I figured it out. The staples these guns use are totally different from paper staples and you’ve got tp buy them separately. Once you do that, the staple is punched straight into the object without bending. For example a paper stapler you’d want to hold papers together. But if you wanted to staple those papers to a telephone pole, you’d want to use the dewalt stapler.
wish he would stop waffling and GET ON WITH IT!
👍✅
You never showed how to load the staples into gun.
2 mins and 30 seconds you finally started saying something I actually care about
Get to the point sooner. I’m in the middle of a project and couldn’t figure out how to change the stupid staples, it took 4 minutes into your video to find the 2 second answer.
@JBTV
3 жыл бұрын
Sorry about that, try the fast forward feature. A comprehensive introduction is key :)
Skip to 5 min to skip the soapbox
You talk to much. Straight to the point. I got shit to do. Cut down all the BS and give what we need.
🪑🤦♂️🚀🧪🧮💭🤸♂️
10 minutes to explain , !!!!!!!! Omg!!!!!😂😂😂😂
Too much blabber
My god get to the point
Ten fucking minutes
@Junekup06
3 жыл бұрын
😆😆😆
@mindygehring467
3 жыл бұрын
If you were more specific with your search, the video starts exactly where you find out how to load the stapler. After finding out how to load the stapler, I decided to watch the entire video and it is very helpful in explaining all the features of the 5 in 1 stapler. Thank you JB!
@Junekup06
3 жыл бұрын
@@mindygehring467 Regardless, the comment was funny 😹
A ten minute video which could have been one minute...what a joke.
@JBTV
Жыл бұрын
🤣🤣🤣
get to the point.
Omg…..how long does he go on…..only wanted to know how to load brad staple things…this guy wasted your life….AVOID THIS VID….IF YOU VALUE THE TIME IN YOUR LIFE
@JBTV
Ай бұрын
Thanks for visiting 😆