This video is absolutely fantastic. It should win an award! Thanks for putting it together - HUGE help!

One additional step that I do is to have a pair of Heavy Duty Jack Stands whenever I trailer my mower or ATV. I place them under the rear lip of the trailer before I lower the gate. It takes a lot of pressure off the hitch. It's less likely to lift off and it adds support to each side of the rear of the trailer as I load. Just don't forget to remove them after you load your trailer. Then same idea when I unload. I place the two jack stands back under the tail of the trailer, lower the gate and back it off. It adds safety to the load/unload process. Other than this little addition, this video is the exact correct way to load and unload. Excellent video. I always appreciate the info you give.

@timothymusson5040

3 жыл бұрын

Great idea!

@WesternEquipment

3 жыл бұрын

This sounds like a really good idea! Thanks for the tip and thanks for watching!

@samhill5231

2 ай бұрын

Yes, and I remember years ago seeing a straight truck with (semi-trailer) landing gear mounted at the back of the box so if it was being loaded with a forklift the weight didn't depress the truck's rear suspension and kept it stable.

Man, that’s a nifty trick to take care of that extra slack! Roll it up, baby!

@WesternEquipment

3 жыл бұрын

@Chaipen Nease Thanks man, I think somebody I know showed me this once haha! Glad to see you are keeping up with the channel! Thanks for watching!

As someone who is getting their trailer advice from strangers on youtube i really appreciate you and the informative video. 👍🏼

@WesternEquipment

Жыл бұрын

Do you feel confident after watching this?

I always cross my safety chains in case it comes loose. The "X" made by chains could actually catch your hitch to give you time to stop before an accident happens.

@WesternEquipment

3 жыл бұрын

Good tip! Thanks for watching!

@geod3589

3 жыл бұрын

That X method is the correct way to do it!

@magnum164

3 жыл бұрын

That is actually the whole purpose of the safety chains. I was going up my driveway which is steep and forgot to lock ball (was simply moving trailer, no intent to travel with it). Trailer came loose but fell on the chains. Was easy enough to load again as the chains kept the tongue up off the ground. But the cross method is actually the LEGAL way to do it. Many do not know that.

@wolfiemcwolf6617

Жыл бұрын

Have to X chains here in Aus.

@Kguy2023

Жыл бұрын

I do the same

I'm amazed at how many "pros" have no clue how to use safety chains. I looked it up before getting a u-haul and the guys at the store did it wrong. Good video. That loop trick is excellent.

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Didn’t know that Chumlee had a part time job, that’s great!!

@WesternEquipment

Жыл бұрын

Yes! Love these comments haha!

@rudytreichel4266

3 ай бұрын

Chumlee did a very good job with this video.

Glad to see a properly tied down mower. If unfortunately the trailer were to slide over that mower is not going anywhere. As in the comments, I would only recommend crossing the safety chains. That is actually a requirement and how they are supposed to be done. Some state troopers can ticket you for improper safety equipment use. As well as the way you have the tractor tied down. For larger tractors I believe it is mandatory to use the metal chains and tighteners. Hate to find all that out, after an accident.

@WesternEquipment

3 жыл бұрын

This is true, I missed the bar on that part. Thanks for watching!

I would have loved to see this video a few months ago ! When bringing my new John Deere X380 home, I loaded it with the tires up against the rear mesh gate and it ripped up the back of my new fancy seat ... HAHA thanks for the helpful info !

@WesternEquipment

3 жыл бұрын

Dang! That’s a bummer. Well at least now you will know what to do haha! Thanks for watching!

@MyGreenLawn2019

2 жыл бұрын

Dude, bummer

@devinchesney358

2 жыл бұрын

@@MyGreenLawn2019 fortunately it was just the seat cover that got scraped up and is replaceable lol

@MyGreenLawn2019

2 жыл бұрын

@@devinchesney358 Yea thats good, but the bummer is the seats can be expensive.

@devinchesney358

2 жыл бұрын

@@MyGreenLawn2019 yes you are correct about that ! They are pretty expensive

Great video Brent! Great information on loading, securing, and uploading! Thanks for sharing! Have a great and awesome day!

@WesternEquipment

3 жыл бұрын

Thank you Vincent, great support as always!

Great video! Thanks for the tip on securing the extra tie-down!

@WesternEquipment

3 жыл бұрын

Thank you and I’m glad I could help you out! Thanks for watching!

Thank you so much. I sincerely appreciate your presentations. I am a medical laboratory scientist that is now engaged in landscaping.

@WesternEquipment

2 жыл бұрын

Awesome! Thank you for watching!

Just brought trailer and ride on, this video helped no end, cheers brother

Thank you for this video. We are picking up a used tractor mower today, getting the uhaul now. I knew I could get some ideas on KZread. I hit “like!”

@WesternEquipment

2 жыл бұрын

Awesome and thank you! I hope you enjoy your new mower!

There is a great video on KZread about the placement of weight on the trailer. Having the weight biased towards the tongue helps the trailer to naturally want to straighten out and follow the truck after hitting bumps, swerving to avoid obstacles ect. Also the weight of these mowers is generally under 900 lbs so it’s not a huge amount of weight anyways.

@WesternEquipment

2 жыл бұрын

This is true. Thank you for the input and thanks for watching!

Lots of places to buy stake pocket D-ring inserts. Simply drop into the existing stake pockets, insert pins on bottom side and you now have an excellent place to attach straps. For a more secure attachment, grab some ratchet straps with the safety hooks. These wont come loose if tension is lost during transport. Other options include FASTSTRAPS. These attach to flooring and have a strap over the tires themselves.

@WesternEquipment

2 жыл бұрын

Thanks for all of the info and thanks for watching!

Loved the ending banter, nicely done gents.

@WesternEquipment

2 жыл бұрын

We try to have a little fun from time to time haha. Thanks for watching!

always with the best videos to help a newby out. thanks!

@WesternEquipment

3 жыл бұрын

Thank you and I'm glad I could help. Thanks for watching!

That’s a nice trailer! Thanks for sharing your tips.

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

Brilliant. This was exactly what I needed to know. Thank you.

@WesternEquipment

2 жыл бұрын

Awesome! I am glad I could help you out!

Good video. You’re extremely clear and precise.

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Thank you. I'm currently looking at upgrading my lawn 🚜

@WesternEquipment

3 жыл бұрын

Awesome! I hope this helped you out and thanks for watching!

Thanks so much. Exactly the information I needed. Just ordered an S240.

@WesternEquipment

2 жыл бұрын

Awesome! I'm glad I could help and congrats on your new mower. Thanks for watching!

@MyGreenLawn2019

2 жыл бұрын

You going to love your S240 - I have videos on my channel on the S240 and the X354. Great purchase.

Very detailed video. Love it!

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

This video was really well done and definitely helpful. Thanks -

@WesternEquipment

2 жыл бұрын

Thank you and I’m glad I could help! Thanks for watching!

Learned so much from this video thank you!! Keep up the good work!!👍👍

@WesternEquipment

2 жыл бұрын

Awesome! I’m glad I could help and thanks for watching!

Love the ending! LOL. A good laugh! And so educational.

@WesternEquipment

3 жыл бұрын

Haha I am glad you like it and thanks for watching!

This was very helpful. Thank you.

Another great video, keep em comin! My S240 is coming home in the back of my truck and I will strap it down on all four corners.

@WesternEquipment

2 жыл бұрын

Thank you and that is good to hear. Thanks for watching!

@MyGreenLawn2019

2 жыл бұрын

S240 is a great machine. I have videos on my channel of the S240 and the X354

Satisfactorily comprehensive, and funny at the end, so I liked and subscribed. Thanks.

@WesternEquipment

2 жыл бұрын

Thank you for subscribing and thanks for watching!

Good info Brent and thanks for the video.

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

Once again, great video!

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

I've been transporting my ride-on mower for 20 years on a 6' x 4' box trailer and now I learn I've been doing it all wrong. Yes, I've been using ratchet tie-downs. But I've always put the mower all the way forward on the trailer up against the front of it and secured it their. I now see how stupid that is. The comments have been helpful also. The trailer is 46 years old and only has one safety chain. I've always wondered why there are two links on every tow bar I've used but just thought it was optional to attach the safety chain to either side. Gave myself a face-slap when I read comment about safety chains. I guess I've been lucky that I've never had the mower move while transporting it. From now on I'll be securing it as per this video, and getting a 2nd safety chain. When I moved from one state to another the trailer had to be certified roadworthy for this new state. I had the trailer re-wired and stop lights placed on the right and left sides of the trailers rear gate. It only had one stop light in the middle of the gate prior to that. I'm surprised they didn't mention anything about it not have two safety chains. Many thank.

@WesternEquipment

2 жыл бұрын

Well I am glad I could help and thanks for watching!

Great video, thanks!

Another great video and demonstration

@WesternEquipment

Жыл бұрын

Thank you and thanks for watching!

great tips.

This video was very helpful for me! I'm going to pick up a lawn tractor tomorrow but i only have 2 straps to tie it down with so i would do the best i can to secure it on my trailer. By the way this was a great video to watch! 👍

Thank you for this video!

Awesome video!!

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

Great video. Thank you

Gave this method a test run today and found it's easy, fast and works as described. Now, how do you tie down a cow in a pickup truck? I once saw a small pickup truck, like those used in NASCAR Camping World Truck Series, with a cow in the back. Luckily the vehicle had been stopped by a patrolman. The elderly driver must have been a dude farmer of something. The mind boggles at what some people do. Cheers.

@WesternEquipment

2 жыл бұрын

Glad this worked out for you! As far as the cow, that's above my knowledge haha! Thanks for watching!

Awesome video.

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

Excellent video. So helpful. Thanks

@WesternEquipment

Жыл бұрын

Thank you and I'm glad it was helpful to you!

fantastic video good info, I always wondered to keep the deck all the way up, or all the way down, I keep it down with 1x4 under it so there is no bounce, neighbor Bob said keep it up, ThankZ

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Well explained. Thanks.

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Great video....many thanks for sharing.

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

You need to cross your safety chains so they make a cradle. That way if your trailer does come loose, the chains will hold up the tongue away from the surface of the road so you can pull over safely.

@WesternEquipment

3 жыл бұрын

Good point, thanks for watching!

@MyGreenLawn2019

2 жыл бұрын

Yup, very true. I always cross my chains, wouldn't do it any other way. good catch

Thanks for all the great tips!! I'm just buying my first zero turn and trailer. Based on the videos here on KZread, most zero turn users don't back the zero turns onto the trailers as the manual says might be safer - less flip back risk. I get that if you do any quick movements when going forward up the ramp, you could flip it back. Any thoughts on one way or the other - loading zero turn forward or backing it in? As I said, almost all videos here on youtube go up the ramp forward so just wondering.

@WesternEquipment

3 жыл бұрын

On a zero turn you could really do it either way as long as you still tie down all four corners like shown in the video. One thing to make sure of if you do pull the mower on backwards is the flip the seal forward if it does not have a locking mechanism to hold it upright. I hope this helps and thanks for watching!

Nice job. Thanks!

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Good video. Wish you posted this 2 weeks ago before I picked up my 2 yr old X380 from dealer 2 weeks ago (bad ignition swith). I didn't tie it down the way shown.

@WesternEquipment

3 жыл бұрын

Thank you and yes we should have done this juts a touch sooner in the season. Thanks for watching!

Good stuff. Thank you sir.

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Thank you!!!

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

A good practice is to not pull your straps tight and then ratchet. Ratchet a couple revolutions before the strap is tightened

@WesternEquipment

Жыл бұрын

Interesting! I had never heard this. What benefits does this give?

@DavidSchnegg

Жыл бұрын

@@WesternEquipment You want to have the strap wrap around the ratchet shaft a minimum of 3 times. This provides enough friction where the straps can't loosen in the ratchet. In your video it looks like the strap only went around 1.5 times. I usually pull up slightly on the strap before ratcheting. There's a fine line with too much slack too... you don't want to exceed 6 revolutions or it gets too tight to lock the ratchet handle down.

Great video. I been meaning to create a similar video for my channel. Nice job!

@WesternEquipment

2 жыл бұрын

Thank you!

Lol the end 😂

@WesternEquipment

3 жыл бұрын

Glad you liked it. We like to have a little fun too!

Well my ex has passed away and i found myself learning to hook up my trailer i infact did cross my chains the trailer popped off the ball at around 40 miles an hr it bounced around and actually broke off the circles that the hooks hook to! i think the inter workings of the coupler were so old it finally just didnt sinch in and i did not have a d hook on it but i learned and replaced coupler, all is good now and i just bought a used john deer rider and was told to use a winch to secure it on the trailer i am so glad i came on you tube searching and found this video im off tomoro to go get the rachet straps! thank you for the video, i also need the shoot guard mine is missing from this one i bought how do i buy just that and know that it will fit?

@WesternEquipment

2 жыл бұрын

Well I am glad I could help! You can actually find that on our website 247Parts.com. You can call the customer service number and tell them your model and deck size and they should be able to find it! I hope this helps and thanks for watching!

I’ve never tied mine down just put the brake on all good no problems.

@WesternEquipment

3 жыл бұрын

If you are going short distances this may work, but when travelling much distance at all I would definitely suggest tying it down. Thanks for watching!

@chickenknucklez2604

3 жыл бұрын

Slam on your brakes to a dead stop abruptly report back

I just bought a John Deere zero turn so I was disappointed that you didn't show how to tie it down.

@WesternEquipment

3 жыл бұрын

Well as long as you use the same process (Finding frame pieces and using four straps to tie down all four corners) you should be fine. Thanks for watching!

Would have liked to see the zero turn tied down!

Thanks for the info! One question, I like that tongue jack how it folds , do you happen to know what brand of jack that is?

@WesternEquipment

3 жыл бұрын

Well I know it is on and East Texas Trailer but I don't know if the Jack had a specific brand or not. I hope this helps. Thanks for watching!

@thazen783

3 жыл бұрын

Thanks for the reply. I have a similar trailer and the tongue jack prevents me from opening the tailgate all the way! I was thinking of a jack that is made for a boat trailer that can swing out of the way!

Thanks

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

Great videos !! I have a question about a 2018 X 350 I just purchased. I can't get it to idle down even tho I have backed off the throttle adjustment all the way. Please enlighten me !!

@WesternEquipment

2 жыл бұрын

This may mean you need to adjust your throttle cable that goes to your carburetor. This is where I would start. Thanks for watching!

You need to cross those chains , that way if it did come unhooked the tongue will not dig into the ground . It's the law in Indiana and probably most places !

@WesternEquipment

3 жыл бұрын

This is true. Thanks for watching!

Nice clear instructions. Exactly the info I needed. Thank you.

@WesternEquipment

Жыл бұрын

Glad I could help!

What size trailer is that? Would both of the lawn mowers fit on that trailer?

Is a 5x8 trailer big enough to safely transport a residential zero turn?

@WesternEquipment

Жыл бұрын

Definitely, as long as the deck is not too wide.

Can you make a video on lubricant the spindle and axle and what kind of lubricant is needed thank you

@WesternEquipment

3 жыл бұрын

I think I could definitely do this. Stay tuned and thanks for watching!

nice info. :) were those john deere tie down straps?? mine are the snap on brand.. the bloopers were great...lol

@WesternEquipment

3 жыл бұрын

Thank you and yes they were John Deere. Glad you liked the bloopers haha and thanks for watching!

@MrJohndeere3720

3 жыл бұрын

@@WesternEquipment ur welcome :) kk...

Should you leave it with the brake engaged? Or disconnect they hydrostatic and leave in neutral and just rely on the ratchet straps?

@WesternEquipment

2 жыл бұрын

I have heard both ways. some say to leave it in neutral to reduce stress on the transaxle. I always put the parking break on and tighten down the straps as much as i can to keep the mower from moving. Thanks for watching!

Can you do a videos on standard blade and mulching blade

@WesternEquipment

3 жыл бұрын

It is on the list. This video will be on our 247Parts channel when it is done. Great request and thanks for watching!

6:50 you never want to put a strap over a metal edge. The metal will cut like a knife right through the strap.

@WesternEquipment

3 жыл бұрын

Will the strap hook is just tall enough if you look close that the strap is barely touching the metal at all but this is very true and I should have mentioned that. Thanks for watching!

I also lower the mower deck so it's not suspended while traveling.

How about the deck? Up or down when loaded on the trailer? I put my deck all the way down when traveling.

@WesternEquipment

3 жыл бұрын

Either way is fine. This to me is more of a preference thing. Good question and thanks for watching!

If you put the ratchet unto the trailer from the bottom of the "Hold down" and then putting the hook on the top, the hook doesn't fall off.

@WesternEquipment

Жыл бұрын

This is true but wouldn't you risk cutting the strap?

If these are John Deere tie downs can you please provide the model number? Thanks!

@WesternEquipment

Жыл бұрын

There are multiple options on these tie downs. If you just search for John Deere ratchet straps you can pick your size and length.

On a double axle trailer, where would you center the weight?

@WesternEquipment

Жыл бұрын

You always want to center the weight to where you trailer will ride level. Always error on having your load too far forward rather than too far back. I hope this helps and thanks for watching!

I'm always surprised that John Deere doesn't have latches of some sort to hold the hood down vs it just resting closed.

@WesternEquipment

Жыл бұрын

There used to be latches but customers complained about them so they were later removed. Is your worry mainly about when you are hauling the mower?

@lyman135

Жыл бұрын

@@WesternEquipment im not concerned, I just always see people commenting on having g to be really careful about that especially given how fragile the plastic hoods seem to be.

Pull all way forward ( backup) watch trucks back bumper),let rise

What about the seat ? Unless you secure it bounces back and forth up and down like crazy !

@WesternEquipment

Жыл бұрын

Yes, sometimes you may want to secure the seat with either another strap or maybe a bungee cable.

What kind of ratchet straps did you use in this video?

@WesternEquipment

Жыл бұрын

These were John Deere branded ratchet straps.

I do not use open hooks or have straps against stake pockets.

@WesternEquipment

3 жыл бұрын

Interesting, how do you do it?

@BG-vq9fd

3 жыл бұрын

@@WesternEquipment I use chain in the stake pockets and hooks with keepers on my straps. Sometimes I also use axle straps. I have an X738 and 2025R gen2 that I trailer.

what the dimensions of this trailer, cheers.

@WesternEquipment

2 жыл бұрын

This one was an 83 inches wide by 14 feet long.

This is how I strap my gt235 down. Great video except for the Chevy 😂

@WesternEquipment

3 жыл бұрын

Haha thanks for watching!

any video on how to load on truck bed…i need it?

@WesternEquipment

5 ай бұрын

Sure do! Check this out kzread.info/dash/bejne/nn2h28-clpaynLQ.html

👍👍

@WesternEquipment

2 жыл бұрын

Thank you and thanks for watching!

would be good if I could hear it

@WesternEquipment

2 жыл бұрын

What can you not hear?

All that trailer for one mower. By this logic, independent landscapers would need a convoy of 3 to 4 vehicles to haul their equipment around. 😅

@WesternEquipment

Жыл бұрын

You don’t have to have this big of a trailer for this mower. This is just the one I had on hand.

?????????????????? Help! Can you tell me how to load my rider ( regular tractor type) onto a trailer that is just setting by the garage? It is not hooked to my car. I need to store it outside and want to lift if off the ground and cover it. ( sorry- single lady here with little knowledge of this trailer I got from my dad when he passed away)

@WesternEquipment

Жыл бұрын

So you never want to load anything onto a trailer by driving it on without the trailer being hooked to a vehicle. If you were able to lift the mower up and just set it down on the trailer then it would be ok but I'm assuming you will need to drive the mower onto the trailer and it is not safe to do this without the trailer safely secured to a vehicle.

@ta6531

Жыл бұрын

@@WesternEquipment Thank you so much.... Can I place blocks under it then for winter storage? I was going to cover it with a tarp as my garage is just too small. Once it is moved onto the trailer?

Excellent! Seen tons of people just put front wheels against rail, set the mower brakes and go on down the road with no ties. Poor decision. Even more don’t bother to have working lights. Of course the police don’t enforce it lest people think they’re being too brutal. Welcome to laissez faire land.

@WesternEquipment

3 жыл бұрын

Thank you and thanks for watching!

Your trailer chains should be crossed to form a cradle in case the trailer comes off the ball.

@WesternEquipment

3 жыл бұрын

Good tip! Thanks for watching!

First maybe

@WesternEquipment

3 жыл бұрын

I think you were and thanks for watching!

This mower really kills it....

This would have been helpful, a month ago😑

@WesternEquipment

3 жыл бұрын

I'm sorry I did not get one out sooner but thanks for watching! I hope it was still helpful for the future.

.

@WesternEquipment

3 жыл бұрын

👍

how can you make a video not knowing the chains are supposed to be crossed 🤦🏻‍♂️🤦🏻‍♂️

@WesternEquipment

2 жыл бұрын

This was definitely missed on my part. Good catch. I always cross mine on my personal trailer, not sure what happened here in the video. Thanks for watching!

You didn’t tie the zero turn down....

@WesternEquipment

3 жыл бұрын

I know, I'm sorry. Just make sure you use the same principle rules of all 4 corners being tied down and you will be set! Thanks for watching!

That is NOT the safe way to load mowers onto a trailer! NEVER drive a mower (especially a zero turn with all the weight at the rear) up a ramp forward. And, the mower should not be driven period, it should be pushed up the ramp manually. Just do a KZread search for lawn mower fails. I know of individuals who were paralyzed using your methods.

@WesternEquipment

2 жыл бұрын

You must be stronger than me pushing up a zero turn up a trailer ramp. If the trailer gate doesn’t have a steep incline it’s completely safe. If the trailers ramps are steep you shouldn’t use it for mowers. I’ve seen several mowers damaged from going deck first down a steep ramp. In summary, don’t use a trailer too steep to drive forward on the trailer ramp.

@rodneysmith1684

2 жыл бұрын

@@WesternEquipment It is so "completely safe" that there are hundreds of injuries, and yes, even paralysis, every year driving up ramps. And yes, even on ramps that aren't that inclined, which, by the way, means you can easily push the mower up. I pushed my 54" zero turn up my ramp with no issue. Also, while you have full width ramps, those foot-wide individual ramps can be very dangerous, as the front casters on a zero turn can fall off, especially if you are trying to get up, your drive tires spin, and you think you can move back down to try again. When the wheels caster they can fall off. I agree with the obvious claim that the steeper the ramp, the more dangerous. However, do a search for "lawnmower loading fails" on KZread and you will see just how easy you can flip a mower backwards due to the amount of acceleration you can easily develop. Some people will back a zero turn mower up, which at least reduces the flip over risk. I am simply saying that before someone posts a "How to" video, they should do a little more research.

I highly recommend not taking any of this guy's advice. You want more weight to the front of the trailer not to center it. He hasn't crossed the chains which is meant to catch the trailer if it comes off the ball. No need for corner to corner, that doesn't do anything for the tractor alright it should be strapped, I'd say one across the front chassis to hold it down. This guy doesn't know what he's doing.

@WesternEquipment

2 жыл бұрын

So you got me on not crossing the chains. I did miss that step, but I could send you countless examples of why you want the weight centered and not on the front of the trailer. Also, the 4 straps is not a necessity but it is the safest way to haul the machine. But everyone is entitled to their own opinion, so thanks for watching!

@RoadieWingZZ

Жыл бұрын

@Chris Evan… with the exception of his failure to cross the chsins, he’s spot on with his advice. A properly manufactured trailer is already weighted forward of the balnce point so centering the load on or slightly forward of the balance point is correct. As far as diagonal tie downs, he’s once again correct as those positions create proper tensioning based on geometric principles and laws of physics to stabilize and secure the load. One strap acroos the front, as you recommend, allows for front to rear lateral movement no matter how firmly you strap it down due to the lower coefficient of friction between the deck and tires. That’s a fools game waiting for a disaster to happen.