How To Load a Motorcycle Into a Truck at RevZilla.com
Автокөліктер мен көлік құралдары
How To Load a Motorcycle Into a Truck
www.revzilla.com/common-tread/...
There's lots of ways to get your bike into a truck, but not all of them are safe for the bike or for you! Check out a few techniques the ZLA team has put to good use over the years. Whether your riding it or driving it, you want to keep the shiny side up. Stay tuned and we'll show you how!
Пікірлер: 693
+Daniel Goon The trailer is made by Kendon. -DrewZilla
@xXSupeRNovA69
3 жыл бұрын
LMFAOOO!!!
@jsmith4844
3 жыл бұрын
Hey Revzilla, you forgot one major part. How to safely unload the bike down from the pick up truck. Can you please add that to the video.
@briarfox637
2 жыл бұрын
@@jsmith4844 Just get a hitch hauler, super easy to roll up and off.
I've been driving around with my motorcycle in my truck since August of 2015. When are you going to show me how to get it out?
@RevZilla
6 жыл бұрын
Just play this video in reverse!
@accouswk
5 жыл бұрын
Bruno Bronosky actually thinking the same thing. Never had a problem getting on into a truck but getting a big bike out, by yourself is a whole different story.
@DanielBrain
5 жыл бұрын
@@accouswk "by yourself" is likely the problem. If it takes two to get it in it will take two to get it out.
@accouswk
5 жыл бұрын
Daniel Brain only took one person and one ramp to get it in - Lol - getting it down with out 2 or 3 Ramps side by side for walking it back while seated
@poorasslawstudent
4 жыл бұрын
@@accouswk i get mine in by myself the exact same way i get it out.
Sweet, but can you show us how to load a truck on a motorcycle too?
@DaBrute
8 жыл бұрын
+SnarkieVlogs Somehow I knew this comment was coming...
@3m0k1d4evr
8 жыл бұрын
+DaBrute how did u see this one coming?? I didn't even think of this one
@mitchg1216
8 жыл бұрын
+SnarkieVlogs Can be done with a goldwing.
@quintinkelly187
8 жыл бұрын
+Ralph Livingston uhhy?!p
@edward1937
6 жыл бұрын
SnarkieVlogs 😂😂
Who else is watching because theyre going to buy a bike far away from home and they dont know how to ride yet LMAO
@rockyrahman5203
Ай бұрын
Its me 😅
@Kittle1
15 күн бұрын
Ayeee 😅
This dude speaks so clearly and energetic.
i dont know why am i watching this if i dont even have a motorcycle neigther a truck.
@ralpo196
7 жыл бұрын
homo est deus lol same
@LorenK
6 жыл бұрын
Because when you buy your first bike and the seller doesn't know what he's doing, then you have a good chance of getting the bike home in one piece. The tie down description applies to trailers, vans etc, which can all be rented or borrowed. There's nothing like sending pics on FB of your new purchase and midway home getting replies that you've done it totally wrong.
@octaviomeza5015
6 жыл бұрын
flip acoin same here
@davem.3309
5 жыл бұрын
Because your smart and want to be informed
@johnjacob688
3 жыл бұрын
Nothing wrong with learning something new. At least now when you see someone doing it wrong or having a hard time you can help.
I rented a small, covered UHaul trailer and used a piece of wood supported by a concrete block to load my sport bike. Then I strapped the bike down inside the trailer with tie downs. I think it only cost $50 to have the trailer for 3 days. The only annoying part was standing in line at UHaul.
@Trekopolis
2 жыл бұрын
Not to mention a week later you start receiving threatening letters from U-Haul that you didn't pay the invoice because their staff that works at those places are too incompentant to do their jobs correctly. It's happened to me twice! ...and I even had the CC paid receipts. Took me weeks to get it straightened out. I can't say I'll ever give them my business again.
@drdrew3
2 жыл бұрын
U-Haul actually rents motorcycle trailers. No modifications needed
@dumbcat
Жыл бұрын
@@drdrew3 They didn't have any motorcycle trailers available.
Love the Hill, that is the first thing I look for....
@Drottninggatan2017
8 жыл бұрын
+Paul Bahre Yes, it was nice. There is a little bit for everyone in these videos.
you need to put a waning in there about when they unstrap to make sure someone is holding the bike down when you release the pressure. the first time I unstrapped my first bike I didn't do it. The bike almost flipped off the trailer. busted the fairings on my first bike during the first 20 mins of having it. it was a lesson I only had to learn once.
Lemmy is such a great presenter. Nicely done.
@thedarkknight4243
7 жыл бұрын
true dat
No wheel chock required if you load the motorcycle angled so it's front wheel is wedged into one of the front corners of the bed; driver side preferred; and slide the back wheel against the opposing side. - Also put the motorcycle in gear and rotate the rear wheel backwards; while keeping bike still; to take up the slack in the drive train. - Loading this way holds the front wheel securely, aids in preventing the motorcycle from rolling backwards, and tie-downs most likely will only be required on the back end of the motorcycle. - This method has served me well for decades with compact pickups and all motorcycles except full dressed touring bikes.
@jakeedgell591
5 жыл бұрын
I'm glad you said this because I was just trying to figure out how I was going to load a bike without the chock
@John_Ridley
5 жыл бұрын
Yeah I once transported a friend's bike home 500 miles when he dropped it and wound up on the hospital while on vacation. I was in the area and had a utility trailer so I just rammed the front wheel into a corner, put the bike diagonally across the trailer and strapped front and back compressing the suspension about 1/3 of the way down. Drove 8 hours at expressway speeds and it didn't budge an inch.
@drdrew3
2 жыл бұрын
There’s always more than one “right way”. It just depends on your setup and equipment. He have done excellent tips to get off to a safe start
@DarkSim77
2 жыл бұрын
"slide the back wheel against the opposing side." Yeah that aint happening with a Zx14..
I like how this guy explains shit.
@hauskins9516
7 жыл бұрын
Food goes in, Poop comes out.
@DoramaRx
4 жыл бұрын
I legit thought this was a How To Basic video just from the Title alone
Instead if running the motorcycle up the ramp and end up with the arms above your head (a very risky procedure), put a small portable stair beside the ramp and step up as you follow the motorcycle on the ramp. In that way you will alway have the arms where your strenght is and can even load the motorcycle alone.
@mganeyev
5 жыл бұрын
I have two identical ramps- one for bike and another for myself going up
@An0niem4
4 жыл бұрын
I don't know, standing on a ladder with a motorcycle also doesn't sound exactly safe to me...
I'm always impressed with all of your guy's videos and your presenter's speaking/language skills. Nothing deters someone from an instructional how-to video more than someone who can't even speak well enough to get the point across. Great video, thanks.
I love Lemmy! I learn a lot from watching him, he is very thorough in teaching. And he doesn't bore you to tears lol. Good stuff!
Very good video. The only thing I take issue with is removing the tailgate. I've been moving bikes with trucks for 30 years and have never removed a tailgate. I've even moved a Harley dresser with my base model 2004 Tacoma with no issues. Otherwise the advice presented is spot on.
Awsome video. Everything you want in a "How to". Lemmy is great. He talked fast and explained it well.
Great video, I have riden a couple of different motorcycles but never carried one on the back of my Truck and always wondered what was the best way to do it, this is a great help.
@drdrew3
2 жыл бұрын
If you own a truck the best way is to get a utility trailer and add a wheel chock. One you have a utility trailer you will find many uses for it. And the wheel chock gets daily use in the garage
+Kyle Bright: This is pretty contested, but Lemmy just compresses the shocks most of the way until the straps are snug but not overly tight. -DrewZilla
@craze-5351
7 жыл бұрын
if I'm 5'1 can I ride and reach the floor with a Honda Grom 2015
@RevZilla
7 жыл бұрын
Yes, the Grom has a very low seat height, so at 5'1", you can reach the ground. -DrewZilla
@rx-ih2ze
6 жыл бұрын
RevZilla what trailer was that you showed?
@katiem1235
6 жыл бұрын
Moto_ R1 I’m 5’4” and very comfortably rode the Grom
@InvictvsNox
6 жыл бұрын
This reply made me laugh so hard in its randomness.
Lemmy is the fucking man! Great video guys, very informative to us noobs.
Looking to buy my first motorcycle. Thanks for the video. It's helping me figure out if cycling is for me. I can't take just the ride into account. Transporting it maintenance cost personal limitations and local laws all play a roll in my decision. Edit: just remembered the riding gear too.
This is an excellent, excellent video. There are SOOO many videos on KZread where some guy's bike goes off the side of the ramp and falls on the ground, often with him trying to ride it up there! This vid is very useful. I learned several good tips.
Absolutely awesome vid! Easily to comprehend and useful information. Thank you!
Dude... You guys are so helpful and make getting a new motorcycle so much less scary
These videos are great. Keep em' coming, Lemmy & crew!
You speak quickly into the point and the production of this video made it so much more clear thank you
Man, that was an excellent explanation and demonstration on how to load a bike in a truck. Thank you!
One trick I do with ratchet strap ends is when the main strap is almost snug to my liking, I thread the tail into the entry point of the current strap. When you ratchet a little more, the tail is pulled into the ratcheting system, securing it with ease, and also easy to pull back out when the disengage of the ratchet is committed.
Outstanding video Lemmy, thank you for taking the time. Very helpful.
Awesome vid man! I'd rather load my bike in the back of my truck but unfortunately I have no friends to help. I'll be going the trailer route but I still found this useful for future reference.
Thanks for posting this video!!! Best regards from Brasilia, Brazil.
I appreciate that you talk quickly and succinctly, so many instructional videos don’t
This is good stuff - DEFINITELY needed info besides product reviews. Thanks RZ!
Informative and easy to understand. Great job!
Great video! Organized, concise, and great tips. Thanks!
Good information. We trailer our bikes out of Texas on our annual Beat The Heat motorcycle tour. I have videos from our tours, but never filmed when securing our bikes.
Ratchet straps release all at once but they are the best for getting the bike nice and tight. Tip: double up your ratchet strap with a Yeti or similar friction tie down after you have secured the bike, then when you release the ratchet strap it transfers the load to the friction strap which can be gradually released in a controlled manner.
great vid. OMG the street triple looks so much nicer with a traditional headlight
Great video. Very informative. Wish i could of seen it prior to loading my own motorcycle onto my truck. It unfortunately died on me and somehow managed to get it in there without removing the tailgate or even having a chaulk for the wheel or anyone to help. I just managed to get it onto the ramps and into the truck by giving it a little gas since i jumped started it. Sketchy as hell but gravity and weight were not on my side, neither were people or a damn hill.
Very good instruction and clearly enunciated - thanks a lot Lemmy.
Excellent, I like that bit about using a hill if one is available...good stuff!
Great tips - very concise
Street Triple... single headlight.. SACRILEGE! Haha. I considered doing it to my STRx as well but those damn bug eyes grow on you! Picked mine up in a truck like this. (Wanted to do a hard break-in so couldn't ride it home on the highway for hours) Probably the best video I have seen done on doing this.
this video deserves 11 out of 10 points. a big Thank You.
Many thanks for the video. Just loaded my Bonneville with no trouble at all, it turns out we even have the same model of ramp.
best tie down I have used is a called a canyon dancer it goes over the bar ends of your bike and then attach a ratchet strap to each end loop and as the straps tighten it pulls in on the bar ends it avoids putting stress on the forks from the sides and also use a suspension saver to alow you to get a good tension on the straps and keep from fully compressing the forks and risking damage to your fork seals if transporting for a long period of time.
Loving RevZilla, Lemmy, and that gorgeous Triumph! Hopefully, the newbies don't load any heavies this way. XD
I use this method using a Condor chock & Canyon Dancer bar strap. Rock solid.
Lemmy, This was an informative and entertaining video. You guys rock!
Good video. I also like to put 2 separate straps on each side up front. Just in case 1 lets go, you have a back up. Could save a lot of headache.
For those extra paranoid about their fork seals like me, I recommend using cam straps on the front. These mostly prevent you from over ratcheting and putting too much pressure down on those seals. Pull on the straps while sitting on the bike until its just tight enough to prevent the bike from wiggling
@TankToChest
Жыл бұрын
Fork seals don’t get blown by strapping the front end down that’s not how it works
Great video, well explained, keep up the good work!
great channel! Lemmy is the man
I use a big boy II ramp, a pair of tailgate locking bars that prevent the tailgate from collapsing under weight. Loading the bike is the easy part for me. Unloading takes a lot more effort and attention to detail to prevent damage to the bike and to myself.
Just did a thousand miles (eastern CT to western PA and back) with a zrx1200 and a z900 in the back of my '16 f150... Nothing but ratchet straps, an atv ramp, and fortuitous hills near the driveways 😎.
There is also the big cooler method. When loading the bike step up onto a cooler placed lengthwise along the ramp. You have much greater control thru the process and can load lighter bikes yourself this way.
Love these videos guys. Keep up the good work!
Just a little side note, when you insert the loose end of the ratchet strap to the ratchet itself its a lot easier if the ratchet is in the closed position. I usually click the ratchet to turn the slit to the angle where its the easiest to insert the loose end. It minimise the duration of the "unstable" part of the process.
Thanks Revzilla. Next level info. Lots of firsts here: - First to mention loading DOWN INTO the truck instead of UP or PARALLEL- First that stresses precommunication of roles- First to mention ratcheting to the MIDDLE of a folding ramp- First to recommend using a TRAILER as an alternative- First to recommend taking OFF the tailgate
I had to transport my dads bike yesterday and I couldn’t get the bike strapped down, my ratchet straps were way to long so I had to improvise by using one hook wrap around he handle bars a few times, go down to the opposite bed hook, then wrap around the bed hook and go to the rear bed hook so I could ratchet it tightly, and I also left the kickstand down to help with some of it. Wasn’t the safest but it worked and didn’t have any problems
Next up: Securing 2 motorcycles in a Truck!Then: Loading a Motorcycle into a Truck, all by Yourself!Great video, Lemmy. I've learned how to avoid some expensive fails in the process. Thanks.
I once loaded a Harley Dyna Low Rider into my pickup and my (former) buddy was telling me to position my truck on an incline (front facing up) and then put the ramps on the truck. We argued about it, but he had been a motorcycle guy for like 30 years and I was new. Anyway, the center ramp (I was using 3 ramps) was never secured and I had no idea how to do it. Well, the center ramp shot out and my (former) buddy caught the bike. minor damage, but I was pissed. This video shows the right way to secure the ramp. Awesome job!
Great video !I also leave the bike in 1st gear.Cheers
great video with alot of tips..any safety tips or techniques with a single person loading the bike? I know steep angles should be avoiding especially with full fairing bikes
Best, most useful video ever!! I really like this guy!!
Thanks Lenny. You convinced me I should spend $25 to rent a motorcycle trailer from U Haul!!
Thank you so much for making these videos.
My favourite duo. Can you teach other methods too? Especially if we need more space in the back.
Yay! More Lemmy videos! Keep 'em coming.
love the videos man keep it up
I've loaded a triumph tiger into the back of my f150 on my own. The trick is a 10ft ramp for the bike and a 6ft ramp for me to walk up. I do use the engine to pull the bike up the ramp. So clutch and brake to control speed and just walk up next to it. Unload is just the reverse, front brake to control speed, and it goes down the 10ft ramp while I stabilize and walk down the 6ft ramp.
So detailed! Loved the video. Thanks Lemmy
In lieu of having a hill - we always loaded stuff into our pickup back on the farm by backing into a ditch then driving around on the road and down into the trailer. With the tailgate down you can just drive right in without a ramp with a bike or lawn mower or whatever.
Thanks guys, this was very helpful.
Thanks Lemmy ...my truck is much higher, so I need as many useful tips as I can get !!
Also put the motorcycle in 1st gear. This is how I loaded my motorcycle on a trailer and throw a blanket over the seat and put a strap over your seat. Your bike won't move at all. Good advice in your video ;)
i load mine into a minivan. other than the pain in the ass process of having to remove the wind/headlight shield bit and the mirrors. a great process! and the cool thing is plenty of places to attach straps too thanks to all those seat hooks!
Dang. Everybody has these little trucks. I have a big Tundra. I loaded mine at the dealer with a super nice ramp but unloaded it by myself at the house. Simply stepped it down the ramp keeping it leaning against me and hand on the brake. Super easy. Easy to load too.
@briarfox637
Жыл бұрын
@@lostinspace280 Maybe back a few years they were less expensive but now these mini trucks cost as much or even more in some instances than a bigger truck.
Your videos are excellent. You have really great presentation skills
I just used this technique and 3 guys to load a Harley street 750 into a tiny uhaul using rented home depot ramps. It works but definitely go the trailer route if you can. You dont realize what you're getting yourself into until a 500+ lb. Bike is precariously perched above your shoulders.
Awesome content! Thanks Lemmy!
so useful!!! I'm just hoping your article shows how it can be done without the front wheel unit and the fancy ramp. I have a pickup and a cruiser, that's it. The rental pickup is a F150 and the tailgate is staying on.
@RevZilla
8 жыл бұрын
+David M The big takeaway from this video and article should be that unless absolutely necessary, you should probably use a trailer. If you're renting a pickup, make sure it has a hitch, so that you can rent a motorcycle trailer as well. U-Haul rents them pretty inexpensively. -DrewZilla
Love the hill trick, I've used driveways, curbs, embankment. There is always a hill somewhere.
If you have a carbureted bike it's a good idea to turn off the gas flow while in transport
Very nicely done video!
You guys have everything!
Lo guys good vid. I found something very helpful once but accident witch you might try and pass on if you like it. Try putting the bike in gear for loading and unloading the clutch then works like a dead man's handle and gives a much safer control over holding a brake imo. When you let your mate take over you would have just let the clutch go and moved to hold the back of the bike before you buddy even got to the front.
Video is hella mindful!😐😧Thanks👏🏾
Lemmy is my hero!!
Great content guys!! Thank you
Great video, now I need some pointers to unload the bike, have been driving 2 weeks with my Ulysses on my truck bed lol!!
@RevZilla
7 жыл бұрын
You know how you got it up? Well, do that that - but in reverse. I sincerely recommend having a buddy help you stabilize the bike as it comes down the ramp. -TeamZilla Chris
great vid. buddy, you just got a subscriber.
When I load my trackbike alone, I drive it up the ramp slowly with me standing besides. It's realy imoprtent to take it slowly and also make sure that the angel from the ramp doesn't hit the bottom of the bike(exhaust or fairing). And lastly a van is the best option to transport the bike (not so high to load as a pickup truck).
Jay Leno has come out of retirement and is now incognito. Also, I was thinking about buying another lighter motorcycle to haul in my truck bed (no way with my 900# Harley), you've changed my mind. Thanks.
nice tutorial, well done 👍
Great video!!
nice ideas! good video. Informative!
Well done Lenny!
This is cool man!
I like getting a run for it (like Evil Knievel) and coasting up the ramp.