Great video. Came apart just as the video instructed. Putting it back together was dancing with the drunk man. Also have a bandaid ready.

Oh my god the tip at 4:55 about using liquid soap to lubricate the inner groove to get the boot seated on the plastic housing saved me so much frustration!

Hugely helpful. Followed the instructions perfectly and got the job done. Saved me a bunch of money. Thanks so much.

You make this seam so easy. I plan on ordering the seal and doing this myself. Thank you for instilling self confidence in this project.

Thank you for your help, you explained everything that made it easy to replace. Again, thanks 😎🍻

Just did this with the help of your video. Thank you. It was much easier with step by step guidance.

Thank You ❤

@appliancepartspros

23 күн бұрын

You're welcome!

Fantastic video, thank you very much. You saved me money and made my life much easier

This really helps a lot.Thanks for the video.

Making it look so easy. It took me 4 because of the area the machine was installed in.

@appliancepartspros

6 жыл бұрын

We're sorry to hear that, but glad we were able to help you out with your repair.

The last front seal Can’t get it to stay in place when I pull the wire to finish it the seal comes off the grub

Thank you !

Didn’t you put the wrong door seal on? The one you took off didn’t have a bottom drain port and the new one you put in did but there was no bottom drain hose. Please clarify and correct this before you confuse everyone.

@appliancepartspros

3 ай бұрын

Replacement parts can look different from the original if the manufacturer has redesigned the part. Our videos are generic videos to give you an idea of how to complete the repair.

Thanks for the detail instructions, everything made it easy. It just took a little longer because I cleaned all the scum before installing the new gasket and if I’m going to rate it from easy as 1 and 5 as hard, I’m giving it 2 just because I used a different spring extension.

Problem: You forgot to connect the seal drain at the bottom.

I can not get my spring back on inside. Guess I have to buy a new washer.

The spring will not go back on!!!

Every single video is for this same design, I must have an older model front load machine, because these instructions don't apply at all for my model.

@appliancepartspros

7 ай бұрын

What is the model number of your washer?

Thank you!!!!!!

Misleading of installation, make sure your camera on the right angle and close enough,