One of the best videos I've seen so far. Plus all the materials with links to purchase are in the description. A+ my man! I'm currently doing my third house subfloor leveling so a laminate floor can be installed correctly. If only I found this video on house one it would've made my life easier. Totally subscribed to your channel!

@MrYoucandoityourself

4 жыл бұрын

Hi Anthony, thanks a lot!

@robjtko

4 жыл бұрын

Tony Angellilli is there a big demand for this type of floor leveling? Thanks

I really appreciate seeing your process and what products and tools you use. Thanks for the video.

@MrYoucandoityourself

5 жыл бұрын

Thanks for watching and commenting! It keep me on the track to make videos for my subscribers.

Thank you for this demonstration you made this look very easy and I know it is not it takes years to become a professional but thank you for sharing

@MrYoucandoityourself

4 жыл бұрын

Hi Carlos, thanks for warm comment!

Wow. Even nailed the amount needed. THanks! Big help seeing the whole process instead of people talkin about it.

@MrYoucandoityourself

4 жыл бұрын

Hi Lex, thanks for commenting!

Very nice job! You make it look so easy

Wow...thanks for this.I have an old farm house and I am going to do this in my living room and dining room next week.Great video!!!

@MrYoucandoityourself

5 жыл бұрын

Hi Craig, don’t forget to put primer. It’s very important. Thanks for watching!

@craigx1433

5 жыл бұрын

Thank you again!!...I was just at Home Depot picking out my product...they mentioned that too.Fantastic vid and Many thanks again.

@MrYoucandoityourself

5 жыл бұрын

Good luck with your project!

WOW! that is a VERY nicely leveled floor! Well done sir...

@MrYoucandoityourself

3 жыл бұрын

Glad you like it!

Nice job! I liked the spiked roller you use at the end. I used self leveler over OSB in a small bathroom and even though I used the maximum amount of water specified it didn’t get completely level even though it had the same consistency and flow in your demonstration. It needs the small amount of agitation the roller creates.

@MrYoucandoityourself

4 жыл бұрын

Hi, yes, spiked roller really helps. Thanks for commenting!

@paradoxdea

Жыл бұрын

Curious: what does the spiked roller do?

@ryanbuckley3314

Жыл бұрын

I think it agitates the leveler, and breaks the surface tension allowing it to roll out more evenly. It probably pokes air bubbles out too.

Excellent video demonstration, well done.

@MrYoucandoityourself

5 жыл бұрын

Hi Arturo, Thanks for watching and commenting!

So that's how you stop your edges from flooding when you can't reach them. Thanks guys. You've really helped me here.

@MrYoucandoityourself

Жыл бұрын

You are welcome!

Very nicely done by an experienced professional.

@MrYoucandoityourself

Жыл бұрын

Thank you very much!

Great job as always. Happy new year!

@MrYoucandoityourself

4 жыл бұрын

All the best wishes!

👏🏻 👏🏻 I never seen it done like this but it makes sense!

@MrYoucandoityourself

3 жыл бұрын

Great! Thanks for watching and commenting!

Cool vid.. When i saw your ear muffs i knew i need some my for myself.👍

@MrYoucandoityourself

5 жыл бұрын

Thanks for watching and commenting!

I like this guys Chinese accent, makes this video more enjoyable to watch.

@MrYoucandoityourself

3 жыл бұрын

A-ha-ha! Thanks

Awesome vid man, keep up the great work !

@MrYoucandoityourself

4 жыл бұрын

Thanks! Will do!

Great video this is the help I needed. Thank you!!!

@MrYoucandoityourself

3 жыл бұрын

You are welcome!

Awesome video!! Thanks for taking thyme time friend.....

@MrYoucandoityourself

4 жыл бұрын

Thanks for watching!

Great instructive video. I have a plywood floor that had backerboard screwed into it, which I removed and left a lot of screw holes that go completely through the subfloor. Can you recommend a sealer that can be applied by roller or squeegee before attempting primer and leveler?

@MrYoucandoityourself

4 жыл бұрын

Hi Scot, very good question! It’s hard to find best choice, because you need materials with good film tension. Otherwise it can be lead through the holes. I would spend time to feel up this holes wit caulk, let it dry and then to do level. Thanks for watching and commenting!

Awesome this is exactly the video Ive been looking for! I've got a couple questions. First, I noticed that some levelers say they can go over wood others not. Is it super specific what self-leveler you have to use? My second question, what's the roller for? Thx so much!

@MrYoucandoityourself

2 жыл бұрын

Hi, I am not using slc if wood subfloor bounce. Sometimes beams too far from each other or not too solid. I am using Mapei slc because they have very good T- primer for wood. Roller make slc more smooth. Thanks!

Great video my friend 👍

@MrYoucandoityourself

5 жыл бұрын

Hi Highland, thanks, I'm trying show more details.

Very helpful to see how to do this, thanks.

@MrYoucandoityourself

5 ай бұрын

You’re welcome!

BRILLIANT VIDEO!!👍👍👍👍

@MrYoucandoityourself

3 жыл бұрын

Thank you! 👍

No damn way I’m going to attempt doing it myself now........ Thanks for showing how it’s done, I think I’ll find a pro to do mine.

@MrYoucandoityourself

4 жыл бұрын

Thanks for watching and commenting!

Hey sir how are you doing I wish you doing well i love you work you are professional I want to ask u about the product for leveling on ceramic , thank you very much with all my love from Morocco 🇲🇦🙏

@MrYoucandoityourself

4 жыл бұрын

Hi Abdellah, I would recommend smooth grinding first, then put primer like primer Mapei "T" and you can level it.

I love the video now do I know how to use the self-leveling cement all I need now is where can I buy earmuffs like yours thank you very much for the video

@MrYoucandoityourself

3 жыл бұрын

Hi Paul, here it is - 3M - H9A Peltor Optime 98 Earmuff Yellow - amzn.to/3r2VBOs

Nice! You must have straight edges of different lengths for different size rooms.

@MrYoucandoityourself

3 жыл бұрын

Hi, yes. I have 3 of them - 6’, 8’ and 10’.

Damn...... Wish you were closer! I need you’re skills!

@MrYoucandoityourself

4 жыл бұрын

Hi Lee, just come to Vancouver!

Great job 👏

@MrYoucandoityourself

3 жыл бұрын

Thanks!

Great video. I have a question Im remodeling my old house and I also had to grind the subfloor. Unfortunately the floor is not level at all. When pouring the concrete how much can you pour? I my low point in the house is about 1.5 inches

@MrYoucandoityourself

5 жыл бұрын

Hi Dolores, in one time you can do 3/4”. You need to do it twice. Fell up lover spots first, grinding humps, and you will be in success.

@c50ge

4 жыл бұрын

Dolores Delgado It is probably too late with that much sag in the floor I would look down stairs or in the crawl space to find the reason for the sag, Thor to eliminate as much as possible before using floor leveler.

Thank you for the great video. I just removed vinyl tiles from my bathroom floor. The sub floor has glue stuck to it now. Would this method still work for me?

@MrYoucandoityourself

5 жыл бұрын

Hi, you have to remove glue, before start leveling or new floor installation.

@DynamicBailey

5 жыл бұрын

Thank you for your reply. It’s much appreciated🌸

This guy knows what he's doing...if you are tackling the job of levelling any large plywood floor, refer to this method

@MrYoucandoityourself

Жыл бұрын

Thanks for your comment!

Great video

@MrYoucandoityourself

5 жыл бұрын

Airplane addict Thanks!

Nice job!

@MrYoucandoityourself

3 жыл бұрын

Thanks for the visit

Good job!

@MrYoucandoityourself

Жыл бұрын

Thanks!

helpful video thank you

@MrYoucandoityourself

4 жыл бұрын

Thanks for watching and commenting!

AWESOME thank you 😊

@MrYoucandoityourself

3 жыл бұрын

Great!

Great video! I`m doing a small reno in my new house, I got some uneven spots on the subfloor, and I will also add 1/2in plywood on top to match my tile for bathroom and kitchen. My question is, do I level prior to adding the new plywood, or add the plywood and then level? I will be installing vinyl click planks for finish. Thanks!!

@MrYoucandoityourself

3 жыл бұрын

Better plywood over plywood and then patch.

@rafaelgimenez8593

3 жыл бұрын

@@MrYoucandoityourself Thank you so much!!

@shaunharrison9618

3 жыл бұрын

@@MrYoucandoityourself what about plywood over concrete? I am removing carpet in bedrooms and installing plywood to match height of existing main floor tiles and then installing luxury vinyl planks through whole house. I can't decide if I should level the concrete before installing plywood or level plywood after.

Good job 👌👍

@MrYoucandoityourself

3 жыл бұрын

Thanks!

Great job man, where can I get that leveler and the brush you use at very end?.

@MrYoucandoityourself

5 жыл бұрын

Hi Juan, you can find links in video description. Thanks!

@theropesofrenovation9352

5 жыл бұрын

It's a spiked roller. Get from amazon or HD

What was the rolling tine brush tool for? Breaking surface tension or air bubbles? I’ve never seen one of those before.

@MrYoucandoityourself

4 жыл бұрын

Hi, this spike roller, you can find link to Amazon in video description. This roller removing bubbles and make surface more flat and smooth. Thanks!

Awesome 👏

@MrYoucandoityourself

4 жыл бұрын

Thanks!

Thank you .very nice.

@MrYoucandoityourself

Жыл бұрын

Thank you too!

great video

@MrYoucandoityourself

2 жыл бұрын

Thanks for the visit

Thanks for posting these videos! I have a couple questions if you wouldn't mind... I read the installation guide for Mapei self leveling and it says to use lath over plywood. You dont use lath, is there some time where its required?

@MrYoucandoityourself

4 жыл бұрын

Hello, good question, I am not used lath because plywood subfloor very solid and primer Mapei for wood very good and well bonding compound with wood. I recommend follow instructions from supplier, it can insure you in a future. Thanks for watching and commenting!

@MrYoucandoityourself

4 жыл бұрын

Are you from Maui?

@kilipoheikekanilehua4049

4 жыл бұрын

@@MrYoucandoityourself On the Big Island. Building a house east of Hilo, HI.

@MrYoucandoityourself

4 жыл бұрын

I am on Maui at this time! Aloha my friend!

I am about to attempt doing this next week for the first time. Where the wall meets the floor, there is large openings where the baseboard used to be. It can be about an inch wide in some areas. What should I put here to keep the leveler from flowing into it?

@MrYoucandoityourself

Жыл бұрын

To prevent any leaks, I applied foam tape and caulk at the junction of the wall and the floor. Here is the example - kzread.info/dash/bejne/jIJko7CIaZnLYrg.html

Beyond the primer, do you have to caulk or tape off the subfloor expansion lines prior to applying the self-leveling underlayment?

@MrYoucandoityourself

2 жыл бұрын

Hi, I always do it.

Nice job

@MrYoucandoityourself

2 жыл бұрын

Thanks!

very nice

@MrYoucandoityourself

2 жыл бұрын

Thanks!

I have just found your series - and am going to put leveler down over a heated mat on backer board that is screwed down to 3/4 plywood quick question - I see you did not go all the way to the walls with the level compound- why is that please, and do you have any further advice about putting leveler over heated mat. Thanks and learned a great deal this week- thanks to you. Great videos.

@MrYoucandoityourself

3 жыл бұрын

Hi Graham, in this video I just filled up low spot. In this situation with heating mat nothing special. Put primer over and use compound. 1/4” over the mat around all perimeter of the room. Avoid walk with spike shoes.

@grahamwilson4354

3 жыл бұрын

@@MrYoucandoityourself Thanks so much for your rapid response- really helps and yes no spikes. LOL Cheers

@MrYoucandoityourself

3 жыл бұрын

Good luck with your project!

Good job! :-)

@MrYoucandoityourself

5 жыл бұрын

Thanks!

what self leveling compound did you use that didn't need the wire mesh or lathe stapled down first?

@MrYoucandoityourself

3 жыл бұрын

Hi Chuck, I am using Mapei Novoplan Two Plus, it's same like Mapei Self Leveler Plus. If you floors have some amplitude moving up and down, mesh and lathe don't help too. If your floor stable, I just use Mapei primer T for better bonding. And very go! Thanks for your question!

Did you seal near the edges of the walls or between pieces of subfloor? The leveller is pretty liquid, I would be nervous about leaks.

@MrYoucandoityourself

3 жыл бұрын

Yes I did. I am doing a lot of preparation before pouring concrete. Thanks

I like this guy

@MrYoucandoityourself

5 жыл бұрын

Thanks!

Hello my friend, nice work! Can this method be done for a second floor? What do you use to block or dam the edges so the compound does not leak into the joists below? Also, how thin can you feather the edges? And if edges have a lip, do you grind it down even to the subfloor?

@MrYoucandoityourself

4 жыл бұрын

Hi Roberto, here is the third floor, and all explanations about how to seal the floor from leaking to downstairs: kzread.info/dash/bejne/jIJko7CIaZnLYrg.html Thanks for watching!

Great videos. Can you recommend the max height you can level a floor to using the quick set? My floors are out over 1-2" across the floor where it settled. I'm curious if there is a min or max amount one can use the leveling mix to repair the unevenness. I plan to add a new hardwood floor on top of this. Hope this makes sense.

@MrYoucandoityourself

4 жыл бұрын

Hi Len, If you need level just part of the room - you can use this method also - kzread.info/dash/bejne/m3efmNx8fs3Zgag.html Al room for 1-2" this method very good - kzread.info/dash/bejne/aaBq1tVqidrUlrg.html Make sense?

Thanks 👍🏻

@MrYoucandoityourself

4 жыл бұрын

You are welcome!

pretty neat. could you recommend a self leveler that you can nail through? I want to install hardwoods over wood subfloor

@MrYoucandoityourself

5 жыл бұрын

It's the wrong idea.

@AccountabilityBurns

5 жыл бұрын

would you suggest putting down plywood over subfloor to bring floor level up then sanding to smooth it level with subfloor?

@typhooney

2 жыл бұрын

@@AccountabilityBurns curious what you ended up doing here cause I’m trying to install hardwood over wood subfloor but is currently not level!

@AccountabilityBurns

2 жыл бұрын

@@typhooney first of all i couldnt find a leveler that you could nail through. Some say you could, then others advised dont do it. So i decided to rip out my living room floor and start from scratch, joists, subfloor, then hardwoods. My floor was pretty wack to begin with so i just bit the bullet. In your case, you may be able to use leveler then glue hardwoods down? sorry i can't be of more help

Few questions: Will moisture from cement mix affect the plywood? Will cement make floor heavier? Can you do it on plywood subfloor on the second floor or only on a slab? What is the lightest weight wise leveling product? Thank you very much!

@MrYoucandoityourself

4 жыл бұрын

Привет гроза рейволюции, прикольное название! When you apply primer, it’s protect plywood from water absorption.. About how big capacity of concrete you can add to wood subfloor at second floor. All structures of house calculated by some weight over, and if you have a look on apartment buildings with wood structure, there is for fire protection a lot of concrete on subfloor. And nobody worried about it. You can add concrete within a reasonable. If it’s 1 inch or 2 - not a problem, but if it’s more, you have to talk with building department in you city. Just think about how heavy furniture when you bring at home a how light concrete will be compares with it. Thanks for your question and watching!

@user-dh6lm9vs2b

4 жыл бұрын

@@MrYoucandoityourself Спасибо! I just bought feather patching cement at Home Depot which doesn't require primer. I think I rather return it and buy the one requires primer at Lowe's. (Название с тройным дном ;) )

@MrYoucandoityourself

4 жыл бұрын

It's a good idea because without primer leveling compound not properly bonded to the plywood. Plywood should be very ruff and perfectly clean for a straight concrete application.

What is the difference between the Mapei L primer to the T primer? The T and SM are the only Mapei my Lowes carries.

@MrYoucandoityourself

4 ай бұрын

SM for peal and steak membrane. L for regular concrete, T for wood surface and concrete as well. If you need for concrete leveling you can buy T and mix with water. All instructions on the bottle. Thanks!

Great vid. Is it a MUST to level the floor before applying 5 ml vinyl flooring? Our floor is FLAT just not LEVEL - Its an old house

@MrYoucandoityourself

3 жыл бұрын

I can’t say to you - must to level. It’s your design, but I am not doing installation without leveling. Thanks

@medavis

2 жыл бұрын

It really just needs to be flat. Being off-level isn't going to affect your floating floor, but not being flat definitely will as you'll have voids or high spots under the vinyl. Over time, gravity and foot traffic will cause problems in areas with voids. Think joints coming apart, popping, squeaking when you walk on it, etc. Level probably more has to do with the foundation and/or framing of the house. Yeah, you could try to make the floor perfectly level, but you'd likely have to level across the whole floor of the home. But what's the point? Unless it's so unlevel that you can sense it when walking around, as if you were walking up/down hill, you won't notice any benefit. Worst case scenario, you level the floor and wind up with one side of the home having 9 feet distance from floor to ceiling, and the other side having 8 feet and X inches from floor to ceiling. That said, if your floors are way off level, then that's going to make applying a self-leveler like this pretty tricky! But I'm guessing that's not the case, otherwise the place probably needs to be condemned.

@wilsonparry9341

2 жыл бұрын

@@medavis Thanks, Michael. Yeah, we spoke to contractor and a friend who does floor installation. Both said same thing- only needs to be FLAT. Nothing sticking up more than 1/8 of a inch. They said unless you're doing some high end home, it doesnt make sense to level since we would have needed about 40 bags of cement! so we only "leveled" one small transition area and "rode the wave" of the rest of floor. Turned out great!

Ever heard of a gauging rake for latex floors, set to what depth you want then rake away with latex even goes right up to the edges unlike a lump of wood which may not be true in being square

@MrYoucandoityourself

3 жыл бұрын

Very good advise, but not for self leveling compound. Thanks!

is putting self leveler on a wood sub floor a good idea?? any sort of movment itll start to crack

@MrYoucandoityourself

Жыл бұрын

Yes, it is a good idea!

Great video! Would I need to use a primer if I am leveling a plywood subfloor that has been previously painted?

@MrYoucandoityourself

4 жыл бұрын

Hi Steve, I would recommend before leveling, remove all paint from the plywood and then put primer. I know it's trouble but guarantee you good results. Thanks for your question!

COOL!

@MrYoucandoityourself

4 жыл бұрын

Thanks!

How do you fill in the edges? Will it look seamless to add more concrete to the edges?

@MrYoucandoityourself

10 ай бұрын

Hi, I am using planipatch, or insulate the walls and than slightly dilapidated with slc using short straight edge.

Hi how are you . After that what you do , just install tiles on it ?

@MrYoucandoityourself

2 жыл бұрын

If you gonna put tiles, you have to put untifracture membrane.

What is the liquid you are using? Home Depot sold me something to level the plywood subfloor and it was very thick and I had to trowel it out and still couldn’t get level….I like the screeting with the straight edge approach

@MrYoucandoityourself

Жыл бұрын

Hi Marc, I am using Mapei Novoplan 2 plus, or Mapei Self Leveler plus. This material easy to use and you can add little bit more water if you need it more liquid.

What about the other part of the room where you didn’t apple the compound? Isn’t there going to be a small step between the two areas?

@MrYoucandoityourself

4 жыл бұрын

Hi Jacobo, I did all floor in one level. No any steps. Thanks for your question!

Can I pour this over rough subfloor(The chippy splintered type---best way I can describe it) that the builder used? We want to rip up the carpet and put down click together laminate. This looks cheaper than spending $15 per 4x8 plywood sheets. Thank you! :)

@MrYoucandoityourself

4 жыл бұрын

Hi, yes you can use self leveling compound, just don't forget to apply primer for wood, for Mapei it's "T" primer.Thanks!

@iskrentsekov104

4 жыл бұрын

Hello thanks for the video. I want to level my floor and lay hard wood floor after can I use your method? Thank you.

@pierreverdoni

Жыл бұрын

a bag is 50$ .........4 times more expensive than plywood

The long aluminum straight edge. Where did you get it and what kind is it

@MrYoucandoityourself

3 жыл бұрын

Firs of all in description link to Amazon, or you can find in your town tile supply store.

Will self leveling mud shrink when dry? Do you recommend a second coat to keep it from cracking?

@MrYoucandoityourself

5 жыл бұрын

If it shrinked - it's not a self leveling material.

Thanks for this vid great job !.

@MrYoucandoityourself

5 жыл бұрын

Hi Robert, thanks for your comment!

@robocop2asap

5 жыл бұрын

@@MrYoucandoityourself Your very welcome.

4:50 what is that tool? Did you use while it was fresh & wet or did you wait a little?

@MrYoucandoityourself

3 жыл бұрын

Spiked roller, you can find link in description for this video.

Why was the subfloor lower in that spot? Won’t the subfloor continue to sink and compress further as time goes on? This doesn’t seem like a solution but rather a temporary fix that will need to be dealt with a few years down the road. Was the foundational issue resolved before leveling out with this mix?

@MrYoucandoityourself

3 жыл бұрын

Hi, there is many factors, why subfloor not flat: house is settle down after few yers, not ideal carpenters work and so on...

What is that broom thing called you run on the floor after you use the levelling board

@MrYoucandoityourself

3 жыл бұрын

Hi Rodney, this is spike roller. Thanks for watching and commenting!

my concern is the point where new floor meets with subfloor as the new layer feather in the new on this has potential to crack awa. Is this valid concern?

@MrYoucandoityourself

4 жыл бұрын

Yes it's can.

@888zz999

3 жыл бұрын

I've also done this and could never find a product that would not chip off and make a mess at the feathered edge. Guess it depends on the product's ability to be spread thin. GREAT skill set. Thanks for sharing.

If you are installing new flooring over the entire new floor, would level the entire floor using this method? If so then would this not be too heavy weight structurally speaking?

@MrYoucandoityourself

Жыл бұрын

I do not think so if you using the right primer and SLC. I am doing it for a long time no complaints about heavy or not heavy. In apartment wood structure buildings a lot of amount of concrete over a wood subfloor and no anyone thinks how it's heavy.

I am leveling a plywood sub floor. Where should I start pouring? High spot to low spot or low spot to high spot?

@MrYoucandoityourself

Жыл бұрын

From high to low.

Твои видео короткие, но очень информативны. Очень классные. В какой пропорции разводишь порошок для получения такой консистенции при разливке? Спасибо.

@MrYoucandoityourself

Жыл бұрын

Привет, все выравнивающие смеси по консистенции и по наличию компонентов разные. Есть такие, которые можно использовать при минимальном количестве воды и они слабо растекаются (Сика),есть которые адаптированы к использованию большего количества воды - Мапей например, который я использую в моей работе. На 3 мешка смеси использую 5 галлонов воды.При таком объеме воды смесь лучше растекается, легче работать с игольчатым роликом ну и время схватывания увеличивается.Если ты работаешь с другими смесями, нужно экспериментировать, потому что при большем количестве воды, когда мало пластификатора в смеси, крупные компоненты оседают вниз и при застывании поверхность смеси будет мягкой и рыхлой, непригодной для использования.

@003Lexa

Жыл бұрын

@@MrYoucandoityourself Спасибо за подробные ответы. Занимаюсь не профессионально. Вопрос встал с renovation в гастинной. Вот и примеряюсь. Твои видео помогли разобраться в этом вопросе. Спасибо.

@MrYoucandoityourself

Жыл бұрын

​@@003Lexa удачи в твоем проекте!

Class! But can you tell me how you would level a plywood floor (over basement) with many low spots up to max of 1.25-1.5cm if I am installing 3/4" staple down hardwood? Have you ever used play sand for leveling? You can reply in Russian if you like. I have a big problem on my hands and would be willing to pay you for consultation. Spaceba! Steve

@MrYoucandoityourself

5 жыл бұрын

Hi Stephen, For this specific leveling (for nail down), you have to use plywood from 1/8 to 3/4". glue plywood in low spots and then sending edges with grinder or floor edger. Than you can start installation. Concrete leveling doesn't work for nail down. Sorry man.

@pavlo687

5 жыл бұрын

@@MrYoucandoityourself Thanks for fast reply! Have you ever used 'play' sand for leveling? What about also using multiple levels of 30lb felt paper or cheap asphalt shingles? Luan plywood would be easy to use also, but I can't find it in 1/8". I must have some sagging joists because when I put 8ft level next to exterior wall and lay it to joist in center of room, the bubble is level but there are low spaces in between. I cannot permanently raise the sagging joists from basement because I cannot jack up floor where there is no footing. I maybe could raise sagging joists one at a time, then install plywood sister, and then hope it would hold straight when I remove jack. Any way you could call me at 513-207-5667?

Can you do this method over hardwood flooring that is over 50 years old after sanding and priming? The floor leveler I have says not to use on hardwood floors, but just wondering why not

@MrYoucandoityourself

2 жыл бұрын

Here it is, I did it - facebook.com/mryoucandoityourself/photos/pcb.2032514790250903/2032512463584469/

Is it recommended to lay 3/4” wood floor on top of that?

@MrYoucandoityourself

3 жыл бұрын

For glue down and floating floor only.

По моему ты наш 😆👍👍 Где правило такое отхватил? 🔥

@MrYoucandoityourself

2 жыл бұрын

Купил.

Enjoy watching how to level a plywood subfloor using straight edge. If you have any questions, please don't hesitate give them to me. You can support my channel buying this tripods. Here is link on my website page - - Floor Screed Tripods - bit.ly/2uVCPfX

@eugeneprystupa5075

5 жыл бұрын

HI, thanks for posting the videos. How important is it to apply the primer to the OSB before pouring Easy Plus mix? Also, is it OK to pour an additional thin layer of Mapei after the original layer is all dry and solidified? I miscalculated the amount required on one of the rooms. Thank you!

@MrYoucandoityourself

5 жыл бұрын

I have no idea about OSB. I use self leveling compound only over the plywood. One coat of primer is enough.

@eugeneprystupa5075

5 жыл бұрын

MrYoucandoityourself thank you very much for your advice

@MrYoucandoityourself

5 жыл бұрын

You are welcome, my friend!

@MrYoucandoityourself

5 жыл бұрын

Self leveling compound for floating and glue down installation only.

Interesting method. I've been looking up videos but they recommend using a bunch of different tools (and cleats). One question, what exactly where you doing with the push broom? Were you getting rid of puddles? Were you doing some more smoothing? What would happen if you didn't use it? I wish the step by step was explained a little better. Great vid though.

@MrYoucandoityourself

5 жыл бұрын

Hi Felix, I am on vacation at this time. I will keep in my mind your questions, and explain later what you are asking for. Thanks for the good comment!

@anticapitalize

5 жыл бұрын

The purpose of the push roller is to help spread the solution and release bubbles.

@MrYoucandoityourself

5 жыл бұрын

Hi Felix, I hope, not to late answer your questions. I am using push broom if I am doing leveling for big projects. Usually, I used a trowel. More smoothing you can make without a spiked roller, just slide straight edge back and force a few times. Here is an example - kzread.info/dash/bejne/gJiMktKNYsvTcrg.html. Hope, I answer your questions, if something missing, don't hesitate to ask me more. Thanks!

@moving_forwardnow6487

5 жыл бұрын

MrYoucandoityourself I cant do it myself. Where are you located. I need help😩

What is that roller process for? Seems like it was fine before you did that part.

@MrYoucandoityourself

4 жыл бұрын

Roller makes surface more flat. Thanks

I just tried this on my wood subfloor. It looked good for a couple of days and then small hairline cracks developed everywhere. Good thing we started with a small part of the floor. Manufacturer of the stuff said you have to lay metal lath down first.

@MrYoucandoityourself

5 жыл бұрын

Hi Steve, first of all need screws all subfloor if you have some movement and then start leveling. Special primer is very important!

Doesn't the self leveler manufacturer recommend attaching galvanized lath mesh to the wood subfloor first?

@MrYoucandoityourself

2 жыл бұрын

I didn't find any instruction about it.This material very flexible and perfect bonding to the wood, if you use right primer. Thanks!

@pierreverdoni

Жыл бұрын

yes they do----but i have done the smae job 15 years ago and his holding up fine

What do u cover ther heat vents woth?

@MrYoucandoityourself

4 жыл бұрын

I used foam from the old mattress. Also you can use foam sponge.

you can use self leveling cement on a concrete floor. Does it work on plywood? Для чего зубатым роликом потом проходили? Нужно ли в Вашем штате получать лицензию на инсталляцию паркета, ламината. Спасибо. The result is perfect!

@MrYoucandoityourself

5 жыл бұрын

Привет Борис, Посмотриб у меня есть видео про плайвуд, нужно использовать специальный праймер ну и проверять сабфлор , чтобы был хорошо прикручен. Роллер нужен, чтобы разровнять раствор и выпустить воздух, чтобы не было пузырей. Лицензия нужна обязательно и страховка. Спасибо за просмотр!

In 10,000 years ET will show up to find this perfectly flat floor and be amazed at the advancement of our society. The accuracy only matched by Egyptian pyramid builders!

@MrYoucandoityourself

4 жыл бұрын

Hi Tim, thanks a lot! You forgot to write - I am proud to be your contemporary!

so once its all spread out it naturally finds its own level?

@MrYoucandoityourself

3 жыл бұрын

Hi Kevin, compound is not floating , like a water. Need to use a spike roller.

Can this be used on a second floor?

@MrYoucandoityourself

2 жыл бұрын

Yes, no problem.

It looks kinda thin on the edges, I would think cracks (fractures) might form in the concrete here, from pressure of walking on it or maybe from heavy furniture? Is this ever a problem?

@MrYoucandoityourself

4 жыл бұрын

This compound very solid and no problem heavy furniture in a future. Thanks

How coin be you didn't need to go to the edges and corner as well as the other section of the floor?

@MrYoucandoityourself

4 жыл бұрын

Hi Ricky, Grinder and straight edge will help.

Is the spike roller necessary?

@MrYoucandoityourself

4 жыл бұрын

Hi Thomas, I would say Yes, all my leveling projects I used spike roller. Thanks

What's the roller broom thing called?

@MrYoucandoityourself

5 жыл бұрын

- Spike Roller - amzn.to/2hTv8iP

Can I lay down vinyl down if I do this?

@MrYoucandoityourself

3 жыл бұрын

Sure. It’s special for vinyl.

Awesome. You need roofing paper and wire mesh?

@MrYoucandoityourself

5 жыл бұрын

Hi, ...and it will call "stucco".

@doug8237

5 жыл бұрын

I’ve seen people use it for floors as well. I’m just asking.