Detailing Flow Chart! - Glossworkz Glaze: bit.ly/3PxyQka - JetSeal: bit.ly/3P62ATy - Butter Wet Wax: bit.ly/44KdAMh - OG Clay Bar: bit.ly/3P6rm6c

Y’all keep dropping info at the best times! Day off tomorrow and my ‘21 TB RS is needing a reaaaaaalll touch up! Cheers, always excited to see more!!

@ChemicalGuys

9 ай бұрын

🤩 Enjoy your detailing products!

I love your products and videos!!!

@ChemicalGuys

9 ай бұрын

Thanks so much for the awesome feedback!!

Thank you for the Best video I have seen 😀! I am learning so much watching your demonstrations! Could you please have another video on using the Clay bar process. Thank you.

@ChemicalGuys

9 ай бұрын

Happy detailing!!

Fantastic results 🎉

@ChemicalGuys

8 ай бұрын

Glad you enjoyed the video!

Awesome i learn alot from that video thanks.

@ChemicalGuys

9 ай бұрын

Glad to hear it! Thanks for watching!

Can you was you car as normal when it gets dirty after applying all these coats and sealants, great videos by the way been a fan for long time

It looks awesome

@ChemicalGuys

9 ай бұрын

🤩🤩

Great video, thank you for it. If I wash my black car using the BlackLight wash and the BlackLight glaze (I think that’s what it is) do I really need to put anything else on it?

@ChemicalGuys

9 ай бұрын

Great combination! Black Light Glaze is great for adding depth and gloss however it provides little protection which is why we follow up with sealant and/or wax.

@ChemicalGuys question about ur microfiber applicator and microfiber wash do u use it once? or do you wash it so you can use it again?

Hey so do we no longer need to wait 12 hours between using jet seal and a wax? Thanks for your videos

Love the content. After using a DA, etc. What is the best wax to use? I like butter wax for sure, can that be applied with a DA or no.. etc?

@ChemicalGuys

4 ай бұрын

Absolutely! Apply Butter Wet Wax with a DA using a Black Hex-Logic Pad on the lowest speed setting.

@chriscaporiccio3896

4 ай бұрын

@@ChemicalGuys thank you for the solid information..

Love the video! Is it a good idea to wax a car if you have a ceramic coating?

@madmaxblaster

9 ай бұрын

As long as the wax you're using is coating specific. If you're using regular wax, then no. The coating is repelling that wax and it's getting wasted, imo.

@ChemicalGuys

9 ай бұрын

Absolutely! Enhance shine while providing protection by layering ceramic with your favorite glaze, sealant and/or wax.

How long of a protection will you get with that job you done. 😊

@ChemicalGuys

9 ай бұрын

Hey! These steps will provide 12 months of protection!

Can I reapply a glaze over the butter wet wax?

Can I apply jet sealant on top of my car if I just got it paint corrected and ceramic coated?

Would love to see video why clay baring your car is important

@ChemicalGuys

9 ай бұрын

Great suggestion!!

So the only time you use a RO machine is applying a compound or polish? Can you use a buffer pad on the RO machine to buff off glazes or ceramics?

@waltercordero2176

21 күн бұрын

Actually yes, you can use it but take a look what pound you have to use to apply, I remember there is a video in the product page where show how to apply it using RO Machine and I remeber you must use White, Black and Red pound to apply the product

Can you make or share the in-depth video on why to decontaminate the paint video, please!!

@ChemicalGuys

6 ай бұрын

Hey! Check out this video. kzread.info/dash/bejne/qamOucWLYqvJorA.htmlsi=cDvQUALZmsbYJqam

goodjob! 🤟😎🚘😁

@ChemicalGuys

9 ай бұрын

Happy detailing!

Fantastic! Love a good flow chart! If my car has professional ceramic no need to clay bar correct? Would I still benefit from a glaze or wax for protection?

@ChemicalGuys

9 ай бұрын

Hey! If your car feels soft, you may skip the clay bar process. Yes, applying a glaze, sealant, and wax will enhance more shine and protection!

I'm new to this, I just purchased products from CG. May I ask if I can apply some products in the following order: Wet Mirror -> Extreme Top Coat -> Butter Wet Wax?

@ChemicalGuys

9 ай бұрын

Absolutely! That is the recommended order of application.

Thank you for a great video

@ChemicalGuys

9 ай бұрын

Glad you enjoyed it!

Hey, and what about hydroslick? When sould i apply it?

@ChemicalGuys

8 ай бұрын

Hey! Apply HydroSlick to a bare surface and then it can be layered with your favorite glaze, sealant and/or wax.

Can you use a DA polisher to apply these products?

@ChemicalGuys

8 ай бұрын

Absolutely!

When would you use polishing and why

@ChemicalGuys

5 ай бұрын

Hey! Use compound and/or polish to remove swirl marks and scratches before applying your favorite coatings.

When do you apply the glaze if your doing hydrocharge,then hydroslick?

@ChemicalGuys

9 ай бұрын

Hey! Apply glaze after HydroCharge and HydroSlick.

I have a lot of plastic pieces on my car. Do you need to tap that off when using these products?

@ChemicalGuys

9 ай бұрын

Hey! Yes, we recommend masking them off to avoid damaging raw trims on cars. Thanks for watching and thanks for being part of the Chemical Guys family!

I used that butter wax in the outside elements today. And fk the haze was difficult to take off

Blacklight is a glaze and sealant, thus no need for separate sealant correct?

@ChemicalGuys

9 ай бұрын

Hey! Black Light is a hybrid, but for more shine and protection we recommend using Jetseal.

@christine1701c

9 ай бұрын

@@ChemicalGuys ok good to know! Thank you 👍

Chemicals guys are the best

@ChemicalGuys

9 ай бұрын

Glad to have you as part of the Chemical Guys family!!

Wash [with Chemical Guys Citrus Strip Wash to clean the zurface and strip away any old oils or protectants.] Clay bar. Compound. Polish. Wax. Seal. Amirite?

@ChemicalGuys

9 ай бұрын

Hey! Following the Chemical Guys Detailing Flowchart, we recommend to apply sealant before wax.

@corradolemme7282

8 ай бұрын

Seal and wax

How often should I use wax?

@ChemicalGuys

Ай бұрын

Hey! Wax can be reapplied as often as desired, it is recommended to add a fresh coat every four to six months.

where does Hydroslick fit into this?

@ChemicalGuys

7 ай бұрын

Hey! Apply HydroSlick to a bare surface and then it can be layered with glaze, sealant and wax.

Can I pay to get my whip detailed at your Torrance shop?

@ChemicalGuys

9 ай бұрын

Unfortunately, the store does not offer detailing services. Thanks for watching!

can we clay then jet seal and skip the glaze

@ChemicalGuys

8 ай бұрын

Absolutely!!

You don't recommend a buffer?

@ChemicalGuys

2 ай бұрын

Hello! Glaze, sealant and wax can be applied by hand or machine.

We know it’s 15 minutes to let sit then buff it off but……. How much time in between each product from glaze sealant and wax?

@ChemicalGuys

9 ай бұрын

Hey! Glaze, sealant and wax coats can be applied almost immediately after one another. Allow about 10 to 15 minutes.

I've read that if you use a glaze then you cannot use a sealer or ceramic after due to those protectants needing to bond to the clear coat

@ChemicalGuys

9 ай бұрын

Hey! We recommend applying a ceramic first, then follow these steps. Thanks for watching!

@BigSteve_NorthIdaho

3 ай бұрын

When applying a CERAMIC… You WILL 1-3 step polish the paint to correct any flaws in the paint first! THEN apply the Ceramic! You can add shine and a little more protection with a wax! But, No resins or glazes are applied before or after a CERAMIC! Remember… Resins, & Glazes are FILLERS! They don’t fix anything, they cover up!

Why not black light on the black car?

@ChemicalGuys

2 ай бұрын

Black Light would also be a great choice!!

If a car is ceramic coated, you cannot clay bar the car, also why don't you have a mite to clay the car? SO how do you remove the ceramic, I do not tbhink is possible, or is it. I do have your clay bar and about 50 of your products.

@ChemicalGuys

9 ай бұрын

Hey! First, yes you may clay a ceramic coated car. A clay bar does not remove ceramic properties. Also, we use a clay bar for this demonstration, it is all preference to the user. Thanks for being part of the Chemical Guys family!

@oneemotiva4975

9 ай бұрын

@@ChemicalGuys Thanks , always heard to do not clay a ceramic car, even by Chicago Pros. Thank you for the info