How To: Kyosho 1/8 Shock Build from New Kit {Beginner Tutorial with Ryan Lutz} (Inferno MP10, MP9)
Тәжірибелік нұсқаулар және стиль
Ryan Lutz going step by step through bag 7 of a Kyosho MP10e TKI2 1/8th Buggy Shock build. The same build will work for all MP10 Kyosho 1/8th Vehicles.
MP10 TKI3, MP10 TKI2, MP10
MP10e TKI2, MP10e
MP10T
MP10Te
Check out my website: www.LutzRC.com
Пікірлер: 34
I was discussing shock absorbers with a friend and this video is exactly what I am doing. Thank you Ryan. I will share it.
Most kit builds went away from internal shock limiters so I stopped using them too. Pro setups don't use them anymore either. I used them in the past bit nobody uses them anymore. They don't create more pack but they adjust corner speed, body roll front and rear traction balance and brake characteristics
Loving the videos Ryan. Good info. Thanks!!
@RyanLutz
8 ай бұрын
Hope they are helpful. Thank you!
Good to c ya Ryan love all your tips.. they always make sense.
@RyanLutz
8 ай бұрын
Thank you Bill!
Oh man. Lol. I was struggling a little. But I got them on.
Thanks Ryan !!! 💪🥳
@RyanLutz
5 ай бұрын
You're welcome! :-)
Thanks Ryan, happy Thanksgiving 🦃
@RyanLutz
8 ай бұрын
Same to you! Happy Thanksgiving.
nice tutorial !!! 👍
@RyanLutz
8 ай бұрын
Hope it can help someone. 👍🏼
How many millimeters thick is that little spacer, I'd like to try to install one. Thank you.
what weight are you starting with out of the kit front and rear
Hi. Thanks a lot for this tips. On the same track do you use the same oil and pistons set up for the suspension on the électrique and nitro ?
@RyanLutz
8 ай бұрын
Yes I do most all the time. 👍🏼
Which kit are you building the Shocks for Ryan?
Good vidéo 👍‼️💯🔥🛢️🏁🏎️🤓🇨🇵
Do you use stock shock shaft with 55mm bodies
@RyanLutz
5 ай бұрын
Yes.
Preparing for lonestar classic, myself👉
@RyanLutz
8 ай бұрын
Nice. Have a great time!
Are there pats that are interchangeable between TKI2 and TKI3?
@RyanLutz
8 ай бұрын
Yes there is only about 5 new items on the TKI3. Center 12/18 diff gears Wing risers Center dogbones Plastic front upper plate Back to the 43/13 diff gears instead of 42/12 Back to small center diff cup New black 1.6 diameter coil springs
@marcowerner8739
8 ай бұрын
@@RyanLutz Thank you for explaining Ryan!
Preparing for Fall Brawl? 🏎️💨🇯🇵
@RyanLutz
8 ай бұрын
I actually did this video a year ago, just getting around to editing it. Still need to get ready for Fall Brawl. 🤣
I put the booth on last less hassle
@RyanLutz
2 ай бұрын
Yes. Had been. While since I built new shocks and forgot. Will have to update video better in future.
@briancarroll6245
2 ай бұрын
@@RyanLutz are you going to the Kyosho masters in France .. ?
@RyanLutz
2 ай бұрын
Sadly no, right before our nationals.
The battery on your caliper is crapping out 😉😄
@RyanLutz
7 ай бұрын
Yeah it does that. 😂