How To Jack Up A BMW E87/E82 1 Series
Автокөліктер мен көлік құралдары
In this video we go through the steps required to Jack up a BMW E87/E82 1 Series, and position it on jack stands.
This is an essential process to be able to complete many DIY jobs on a BMW E87/E82 1 Series at home.
If you found the video interesting and useful, don’t forget to give it a like, and be sure to subscribe for more M Tech Guy 1 Series E87 & BMW videos. Thanks for watching.
As always- ensure you use good safe working practices when working on your own car or any other. Any doubt or concerns you may have at any time, please consult a professional.
M Tech Guy assumes no liability for damages to any persons or property. YOU ARE RESPONSIBLE FOR YOUR OWN ACTIONS.
Пікірлер: 35
Someone who knows how to jack a car up 👍👍👍
You're a life saver! You also just saved me $250 on the service I did today 🙂 cheers!
@MTechGuy
2 жыл бұрын
Nice one, good job man 👍
Great explanation !! Muchas gracias.
Just what I needed to see. Thanks for your help mate.
@MTechGuy
2 жыл бұрын
Thanks for watching man
Excellent video for newbie's like myself! Full of very useful and valuable tips!! Thank you very much.
@MTechGuy
2 жыл бұрын
No worries man, glad you found the video useful. Thanks for watching!
Thank you!
Good video
Thank you for this video!!!
@MTechGuy
2 жыл бұрын
No worries, thanks for watching!
Very helpful, thank you.
@MTechGuy
2 жыл бұрын
Thanks for checking out the video man 👍
Excellent video’s. Would be great to see a video on changing the coolant. Cheers
@MTechGuy
2 жыл бұрын
One in the pipeline 👍
Hey great video bro. I have a 2004 120i (e87) I have fault code p110d (Throttle position sensor) the only part I can find is the "Accelerator position sensor " what is part of the pedal. Is this the part I need to replace? Is it plug and play with new pedal, or does it need special software to pair to ecu?
Thanks for the video! Not too sure about using the diff as a jacking point? Surely it's better to use the subframe part just before the diff? Just a thought! Thanks
@MTechGuy
2 жыл бұрын
The differential is fine so long as you keep clear of the alu cover. That part of the frame just before the diff is fairly flimsy on the 1 Series, I wouldn’t lift the car there
Will a regular 2 ton Jack get me far enough under the front of the car to have enough room to pump the handle and get the axle stands under the jacking points? If not is there anywhere else you can Jack or place an axle stand?
@MTechGuy
2 жыл бұрын
Yes, easily. You might find you have to run the front wheels up on a bit if wood first, or use a smaller Jack to lift one of the front jacking points first, to be able to fit your jack under the front of the car
Hello, the plastic support for the front lifting is also protecting the oil plug?
@MTechGuy
Жыл бұрын
Nope
Would you also take an automatic gear box out of "park" when you release the handbrake??? Mines a 2018 1series. Maybe put it in neutral?
@MTechGuy
8 ай бұрын
Yeah, put it in neutral
@thisall4real
8 ай бұрын
@@MTechGuy thanks
Is block you use on the front on older 1 series bmws mine is a 05
@MTechGuy
2 жыл бұрын
Mines an ‘06
Rim saiz? Et?
Ta!
@MTechGuy
Жыл бұрын
Thanks for checking out the video man
why release the hand brake?
@MTechGuy
Жыл бұрын
When you Jack up the front of the car the body rotates around the rear wheels, if the handbrake is engaged you’re forcing it and it’s likely to stretch your handbrake cable
@marinytu
5 күн бұрын
what about manual transmission? should it be in 1st gear or not?
@hurpaderpp
5 күн бұрын
@@marinytu neutral with chalks is prob the best way. ive def kept my manual in first gear jacking the front and its completely fine. no different than parking on a hill.