00:00 Overview of the different radio handles over last 20 years for the TS12,TCRP1200, TS15,TS13,TS16,MS50/60 : RH1200-RH15-RH16-17 radio handles and how to visual tell the difference between the models and which they are designed to work with
01:15 Delete the Allobjects.zip file on TS16
04: 05 Back up TS16 Settings & Jobs from TS16 to SD card before formatting
Please refer to video on CS20 Backing up Jobs and settings, same procedure on the TS16
03:35 Overview of scree for format System ram and Internal Memory
05:00 Format System Ram, Internal memory and Reset Windows on TS16- good to do this once a year to ensure working on a "clean slate"- if your robotic "suffers" from poor radio range and patchy radio signal, this is first thing to try before looking at radio hard ware issues, a quick and easy option
05: 00 Reset Windows after formatting TS16
05:30 check firmware version on TS16, important as if TS16 is on version 6.50 the CS20 has to be on the Level 6.xx firmware version. If cs20 was on version 5.5 or older, would not work as firmware incompatibility issues. Check videos on loading firmware
06:05 Settings on TS16 to enable the RH16-17 radio handle after the format
06:40 CS20 how to change between GS mode and TS mode for TS16-please use "TS only" when in robotic else can see radio issues short range if you use the "GS &TS mode" this "GS&TS" mode is only used with "Smart-pole" when both the GS GNSS sensor is on and TS16 is on, if the cs20 cannot "find " the GS sensor in "GS and TS mode" then performance struggles as it uses resource to search for the GS unit this is very important
07:10 Connect the cs20 via "long range TS" to the TS16 robotic
09:10 Section on Older TS12 and TPS1200 robotics: How to format System ram on a TS12/TPS1200
09:45 TS12-TPS1200 How to program it to boot up in "Electronic level" screen
10:10 Overview TS12 TPS 1200 Configuration of the RH16-17 radio handle and importance of checking baud rate setting on TS12. Ensure RH16 is set to 115200 Baud rate
******Important if you are Using a TS12 with a new CS20 please check to ensure the "TS12 option" is purchased, can be loaded via a license key. On CS20 if you try and interface and the "TS12" is NOT visible to be selected, this is the problem, call you Leica rep with CS20 Serial number and order the TS12 code, to be loaded on cs20 to enable this selection
"Part Number: 833039 Leica Captivate TS12 connection for CS20"
we have posted a video on loading license keys, very simple process. But this is a common issue if clients with older TS12 update to a CS20*******