How To Install Z1 Motorsports Big Brake Kit For Q50/Q60
Жүктеу.....
Пікірлер: 21
@spawnandbatman69756 ай бұрын
Do they sell a bigger dust shield? Just for a clean install
@Ghost.q50
6 ай бұрын
Yes they do, it was an option you can add when you order from Z1 motorsports
@osirisgomez93653 ай бұрын
What are the wheel specs you have? I own the brake kit for my q60, but i have to run spacers for the OEM wheel.
@Ghost.q50
3 ай бұрын
My wheels are 20x 8.5 +35 in front and rears are 20x 9.5 +35
@sa-iu1cc
Ай бұрын
@@Ghost.q50what are the tire widths?
@Jay2lit.2235 ай бұрын
How many banjo bolt did you get from z1
@Ghost.q50
5 ай бұрын
I don’t remember tbh but I just know it was enough for the install
@MikeJohnson-ej4oc7 ай бұрын
Also, any specific reason why you went with the Z1 kit, and not the Akebono ones? I know there is a slight price difference, but they should have similar clearance for wheels. Thanks.
@Ghost.q50
7 ай бұрын
It was mainly just price because I heard they have same build quality and yes they should have same wheel clearance
@GyalkaQ50
5 ай бұрын
They’re the same Z1 just put the emblem on it
@MikeJohnson-ej4oc7 ай бұрын
Did you have to buy those copper washers as extras from the website?
@Ghost.q50
7 ай бұрын
No they came with the big brake kit
@BabyUnicorns20006 ай бұрын
Why did you not upgrades to ss brake lines as well?
@Ghost.q50
6 ай бұрын
I probably should’ve since they were only an extra $100 but I just didn’t feel I needed it
@BabyUnicorns2000
6 ай бұрын
@Ghost.q50 the oem rubber lines tend to expand and give a soft pedal feel after a little hard breaking. They are well worth the little bit of time and money.
@jordez13 ай бұрын
Great video, can i use oem akebono brake pads all around instead the ones offered by Z1? Thx
@itsdevv5706
2 ай бұрын
Should be able to if they fit. A fit is all that matters not brand
@iansoulless5 ай бұрын
Is there anyway to stop the squealing 🤣
@Ghost.q50
5 ай бұрын
Unfortunately no that’s one thing I’m dealing with every morning😂
@edjyz_
3 ай бұрын
Did you use the same break lines you already have in the car?
Пікірлер: 21
Do they sell a bigger dust shield? Just for a clean install
@Ghost.q50
6 ай бұрын
Yes they do, it was an option you can add when you order from Z1 motorsports
What are the wheel specs you have? I own the brake kit for my q60, but i have to run spacers for the OEM wheel.
@Ghost.q50
3 ай бұрын
My wheels are 20x 8.5 +35 in front and rears are 20x 9.5 +35
@sa-iu1cc
Ай бұрын
@@Ghost.q50what are the tire widths?
How many banjo bolt did you get from z1
@Ghost.q50
5 ай бұрын
I don’t remember tbh but I just know it was enough for the install
Also, any specific reason why you went with the Z1 kit, and not the Akebono ones? I know there is a slight price difference, but they should have similar clearance for wheels. Thanks.
@Ghost.q50
7 ай бұрын
It was mainly just price because I heard they have same build quality and yes they should have same wheel clearance
@GyalkaQ50
5 ай бұрын
They’re the same Z1 just put the emblem on it
Did you have to buy those copper washers as extras from the website?
@Ghost.q50
7 ай бұрын
No they came with the big brake kit
Why did you not upgrades to ss brake lines as well?
@Ghost.q50
6 ай бұрын
I probably should’ve since they were only an extra $100 but I just didn’t feel I needed it
@BabyUnicorns2000
6 ай бұрын
@Ghost.q50 the oem rubber lines tend to expand and give a soft pedal feel after a little hard breaking. They are well worth the little bit of time and money.
Great video, can i use oem akebono brake pads all around instead the ones offered by Z1? Thx
@itsdevv5706
2 ай бұрын
Should be able to if they fit. A fit is all that matters not brand
Is there anyway to stop the squealing 🤣
@Ghost.q50
5 ай бұрын
Unfortunately no that’s one thing I’m dealing with every morning😂
@edjyz_
3 ай бұрын
Did you use the same break lines you already have in the car?
@Ghost.q50
3 ай бұрын
@@edjyz_Yes