This is the best guide for panelling on KZread - Thanks so much!!!

@homeimprovements

11 ай бұрын

Glad you think so!

I love it how you did the divide gap, that's thats most important thing

Great video, you explain everything in detail and easy to understand!

Spent the past few days doing our stairs/hallway and really happy with it. Never done any panelling before so tackling crazy angles/curves was a bit daunting! Your video was fab and helped so much. Thanks for sharing 😊

@homeimprovements

5 ай бұрын

That is awesome!

One suggestion I would make. When cutting your mitres with many the same size it’s much easier to set up a stop block away from your blade and this ensures they are all the same size and it’s much quicker.

Love this video! Great tips!

Cracking video, thanks guys, going to tackle our staircase now! 😃🥶

@homeimprovements

5 ай бұрын

Good luck!! 😊

Great tutorial. I'm glad I came across your video. I can't believe you made d.iy look like so much friggy fun 😅😅😅. The chalk line thing was a great idea, I've never seen that before. Nice job, and many thanks 😊

@homeimprovements

Жыл бұрын

Thanks 😁👏🏼👏🏼

@moa4721

Жыл бұрын

Yes I was thinking the same specially with the chalk line the way you make it Ping 😂 it’s like pulling on some nipples

Excellent video as always lads, thanks

Brilliant Video, super instructional and enjoyable to watch. You made a great job of that panelling. Love the channel, keep up the great work.

Great video guys, keep it coming!

@homeimprovements

Жыл бұрын

Thank you

Love this , would you come do this on my hall stairs and landing please😂👍😍

spot on lads, nice job.....👍👌👌👌👌

@homeimprovements

Жыл бұрын

Nice one 😁💪🏼

Great series of vids content n presentation very enjoyable and informative

@homeimprovements

Жыл бұрын

Thanks 😊

Love it

@homeimprovements

Жыл бұрын

👏🏼👏🏼👏🏼

It's not covered in this video but I think a video on how to cut the mitres on the mouldings would help a lot.

@selinabella8606

Жыл бұрын

I’m confused, it was in the video 🤷🏻‍♀️

@manonamountain

10 ай бұрын

No it wasn't, you need to make a jig at a 45 degree angle, that needs clamping to your mitre saw, because most saws only cut between 45 and 90.@@selinabella8606

your acting skills are great too :D

@homeimprovements

9 ай бұрын

Thanks! 😄

Did your nail gun nails go into a brick wall, if so what is the nail gun and type of nails, thanks M / Your Videos are more entertaining than other people's channels

Best tutorial on YT. Would you recommend a specific paint covering both walls and mouldings or would wall paint suffice?

@homeimprovements

9 ай бұрын

Thanks just wall paint on ours no issues 😊

Dividing lengths into even marks is wayyy easier with metric

Great video 👍🏼 How would you figure out how much panel moulding you need for job like this? Also if the dado rail is higher than the handrail on the stairs, how would you terminate the dado on a landing where the dado would finish at the banister? If that makes sense 😬🙈 Thankyou

Legendary champions

Great easy to follow tutorial!! Thank you so much!

@homeimprovements

Жыл бұрын

Thanks 😁😁

Hey guys, could you do a video on vertical wooden wall slats sometime, as in feature wall, thanks

Thank you for cutting out all of the jargon almost convinced myself I can do some of these jobs now. How achievable would swapping stair rails etc from 60/70’s vertical style to traditional spindles etc??

@homeimprovements

8 ай бұрын

Full oak staircase build coming up so should cover a lot of it 😊

Brilliant video.👍🏻 What is the name of the glue what you are using to assemble the moulding please? Thanks 😊

Great video guys ... with my hallway wall its would start at the front door and leads all the way up the stairs finishing at the bathroom door. When working out the number of panels would it be best to take the complete measurement or can i break it down into sections? ie door to bottom of the stairs, bottom of stairs to top etc. I would obviously like it all to look uniform so your expertise would be appreciated.

Great video, best I seen so far. Bit of advise..my wall in some places is slightly bumpy, uneven plaster work,would panelling still work ..how would you tackle this issue? Thank you Ps: i am diy ..what saw size would you recommend for this work.Thx

@homeimprovements

Жыл бұрын

Thanks Anna and caulk the gaps after your done 😊 a small mitre saw will be fine don’t need anything big 😁

Hi, great video, very helpful. im using a friends nail gun to save money, i will need to buy the pins, though. What size would you say i should use for the dado rail and the rhin panels? Appreciate the help.

Thank you, great video, helped alot! A quick question. I have a landing that is a 90 deg corner and from there the stairs goes up at a different angle. How do I make the trim join perfectly at that corner. tia

@homeimprovements

11 ай бұрын

Thanks will try to make a video soon it’s hard to explain 😊😊

When you said "make sure it's pressed in", you pressed it in and it moved... genuine question, if only using 4 pins, how do you go about getting the profiles properly flat against the wall?

@homeimprovements

6 ай бұрын

The grab adhesive does 99% of the work the pins are mainly to stop it sliding 😊

Hi great job and great video. What glue do you use to stick the corners of the picture frames together?

@homeimprovements

6 ай бұрын

Ctec super fast 😊

thanks for the video, the wife wants this now...the only bit i may do differently is under the window ledge, rather than have it meet the underside i'd probably have the 100mm gap...not sure though until I see it, might look odd

@homeimprovements

Жыл бұрын

Thanks 😊 and Yh it’s all personal preference another reason it’s great to chalk the design first 😁👌🏼

Great tips guys. I when it’s on 22.29 how did you get the the flat section in the top point of the panel, I’ve recently done some and struggled to get cuts my chop saw it maxes out at 60 degrees. Cheers lads

@homeimprovements

Жыл бұрын

You cut a scrap at 45 clamp that to your saw you then have a starting point of 45 degrees hope that helps 😊

Can you please do a video showing how to bend gripper metal around a vinyl entry way?

@homeimprovements

Жыл бұрын

Will try 😊👍🏼

Great video - thanks! A quick question, if you can't use pins to hold in the panels because it's soft brick for example, what can you do instead? Would it work to use more sh*t glue with i.e. masking tape to protect the wall from the excess that squeezes out?

@homeimprovements

Жыл бұрын

Could work these walls are brick and will take a panel pin until the glue sets then remove it 😁👌🏼

What would you suggest if there is a radiator on the wall where you want your panelling?

MY drywall has all kinds of texture , poping nails and seam lines. Im not sure doing this wainscoting will look good over a non smooth surface. Any suggestions? Floating drywall, apply wallpaper first, ?

Great video chaps! Silly question incoming - if there is approx a 10mmdifference across between where the top / bottom of the panels will be over the space of a wall (2m) because it's an old / uneven house, do I need to do anything different to account for this? I'd be looking to do 2x panels with the same gaps as you've done. Will this much of a difference matter?

@homeimprovements

Жыл бұрын

Chalk it out chances are it won’t be visible to the eye 😊😊😊

@mrjgooding

11 ай бұрын

@@homeimprovements Nice one, appreciate it! :)

What is the appropriate height for the baguette above the Panels?

What size pins would you use if pinning 15mm thick beading to a brick and plaster wall ?

Think I’m in love with you 2❤

@homeimprovements

Жыл бұрын

Thanks for the support 😊🔥

One side of our hallway has a couple of doors so some of the walls in between the doors are not very wide so using the same spacing as the opposite wall would look really odd as we would have one of the panels extremely thin. Might look odd to leave them out as it wouldn’t flow up the stairs

@homeimprovements

Жыл бұрын

Yh you can adjust as you see fit to get what looks best for your space 😁 that’s why it’s always best to chalk it out first

Thank you so much for this video!!!! Quick question (and perhaps a stupid one). When you apply the panels vertically up the stairs, should every single one be the same length? My calculations are suggesting that the panels will increase in length as they go up the stairs, but I can't work out why. Any advice pls?

@homeimprovements

Жыл бұрын

No stupid questions 😁 so if measured horizontally level they should be the same they won’t measure the same when measured at the angle of the staircase . Hope that helps 😊

@judithamadi6809

Жыл бұрын

@@homeimprovements okay will try that and let you know how it goes. Thank you so much!!! Do you have an IG account? Would love to follow you there

@homeimprovements

Жыл бұрын

We do it’s the same name and logo 😁💪🏼

Hi, i have a large curved section at the top of the stairs.... can you give any more advice or help with tackling the curve?

@homeimprovements

Жыл бұрын

If we get a chance we will 😁

How long would a project like this usually take you guys to complete 👍

@homeimprovements

Жыл бұрын

A day to get that done longer when we are filming tho 🙈

Hi, first of all your video has allowed me to attempt panelling my whole hallway all the way to the loft! But I need some help - what if the angle is 42 and the calculation answer is 69?!?

@homeimprovements

Жыл бұрын

Great not sure what your asking there tho 🧐

Lads im pulling my hair out.. ive got a 45 degree angle on the one of the stairs, how do i get it to join? Can i send you a pic somehow? 😂

@homeimprovements

Жыл бұрын

Gonna make a video on it mate had a lot asking but simply put you need to level of turn then go back down

What size pins did you use?

How do I do the stair calculation if I have ready made panel kits that are pre-cut to 45 degrees, can I just saw the correct angle and make them slightly smaller?

@homeimprovements

Жыл бұрын

Not too sure what your saying there mate ?

@nazmulmiah6058

Жыл бұрын

@@homeimprovements I bought these pre cut panelling kits from b&q mate and they’re designed for a flat wall… would I be able to use them for the staircase too ?

@homeimprovements

Жыл бұрын

Ahhh you’d need to recut all the mitres 😊👍🏼

How do you do measure a whole passage and stair case

Hi, what is the name of the material your using ??

@homeimprovements

7 ай бұрын

Mdf ?

It’s all well and good but I can tell this is probably your first time doing this. You need to learn how to size the boxes. The end result would look so much better!

@lindsay_dee

Жыл бұрын

Do you mean how to decide how many you should have? Do share!

@davidcerce

Жыл бұрын

@@lindsay_dee Yes, you’re correct. You find the smallest wall in the room first, this will give you the relative size. Wall sections that will have multiple panels should be broken into odd numbers of panels. Three or five panels will have a more elegant appearance than two or four, for the same given wall section.

@lindsay_dee

Жыл бұрын

Magic - thank you!! Big help

@davidcerce

Жыл бұрын

@@lindsay_dee You’re very welcome! Let me know if there’s anything else I can help you with!

@RightDenied

11 ай бұрын

​@davidcerce Thanks for the tip. I'm researching doing this, and haven't seen this mentioned anywhere, but it seems obvious now you've said it.

Just for you, might be good to switch your audio to mono as it keeps going left to right :)

@homeimprovements

8 ай бұрын

We’ve since updated our audio it was an issue with the mics thanks for the heads up tho 😊😊

Is there a profile name for the beading used for panels please

@homeimprovements

5 ай бұрын

Ogee 😊

@derekwatt6314

5 ай бұрын

Thank you

Hey can y’all add closed captioning to this video please

@paulrush808

Жыл бұрын

Lol

@chrissy212e

Жыл бұрын

That's what the transcript for 😊 🇬🇧

no sound

My angle is 46 degrees so minus 180 divided by 2 is 67 degrees how do I cut this?

@homeimprovements

7 ай бұрын

We have a short show how to create a jig for those cuts 😊

@deancarter4109

7 ай бұрын

Where’s the show lol

@deancarter4109

7 ай бұрын

@@homeimprovements given up looking for it lol

My right ear is lonely

Get rid of the music

@homeimprovements

2 ай бұрын

Thanks for the tip, hope you have a good day 😊

It needs setting out better you would not have a panel on the flat and going upstairs