How to Install Vistalux Corrugated Sheet Roofing

Vistalux roof sheeting is so easy to install & provides a great looking, durable plastic roof. Sheet roofing is ideal for conservatories, porches, extensions and much more. Save money on your Ariel Plastics Vistalux at Roofinglines bit.ly/2c8kNjX

Пікірлер: 31

  • @megapangolin1093
    @megapangolin10933 жыл бұрын

    Excellent, clear and professional advice. Very impressive how to fit so much information into such a compact video.

  • @woodlarker
    @woodlarker2 жыл бұрын

    Note that the Vistalux Super Fixings come with 20mm spacers -- these are not shown or mentioned in the vid. The spacer goes on the underside of the sheet and against the wooden frame. The eaves filler is then pushed into place to fill the gap between the frame and the sheet -- the fixing screws should be at the back of the eaves filler. Hope this is of help.

  • @bethmorano1452
    @bethmorano145210 ай бұрын

    I have had no issues with this. I am starting another project and using blue. It was $7 cheaper a sheet than clear.

  • @AndrewHelgeCox
    @AndrewHelgeCox2 жыл бұрын

    Can the sheets be glued with the same kind of glue used for pvc pipes? This is to patch a hole with an offcut. It doesn't have to be pretty.

  • @erichsh58
    @erichsh582 жыл бұрын

    Would this material survive an icicle dropping on it from ten feet above?

  • @mariamilton-talbot4664
    @mariamilton-talbot46647 жыл бұрын

    Great vid - what about the spacers you sell with the fixing screws - what are they for?

  • @dannygraham8550

    @dannygraham8550

    3 жыл бұрын

    Your shed looks great! Thank you for sharing your knowledge with us! I built an 8x10 shed for my kids in my backyard earlier this year using plans I got from *WoodBlueprints. Com* Clear directions and an accurate materials list...It was great for a novice builder like myself!

  • @anitakennedy4184

    @anitakennedy4184

    3 жыл бұрын

    i love how easy the plans are in *WoodBlueprints. Com* to understand and the step-by-step videos they have. Makes getting material really easy

  • @alexphillips5600
    @alexphillips56004 жыл бұрын

    when putting the flashing mouldings in, do you stick them with the butyl tape or leave that hanging?

  • @anitakennedy4184

    @anitakennedy4184

    3 жыл бұрын

    Great video content! Apologies for butting in, I would appreciate your opinion. Have you thought about - *WoodBlueprints. Com* It is an awesome exclusive guide for building better sheds and woodworking without the normal expense. Ive heard some extraordinary things about it and my mate at very last got astronomical success with it.?

  • @UserName-sj8fg
    @UserName-sj8fg Жыл бұрын

    My experience is that the clear, transparent roofing gets brittle in 2 years and hail will bust it up. The solid color panels last a long time and are very strong..

  • @showspotter
    @showspotter Жыл бұрын

    would that support the weight of snow?

  • @tibbs4000

    @tibbs4000

    2 ай бұрын

    Snow should slide right off

  • @HsingSun
    @HsingSun2 жыл бұрын

    Good job! Why did you use clear plastic, not white plastic for a parking space?

  • @Icutmetal

    @Icutmetal

    4 ай бұрын

    Why not?

  • @AndrewHelgeCox
    @AndrewHelgeCox2 жыл бұрын

    How can I patch a hole from an impact?

  • @RodGibsonMusic

    @RodGibsonMusic

    2 жыл бұрын

    if it's a small hole, you can use silicone. If it's a crack, I'd use some kind of transparent super glue.

  • @warrenlawhorne

    @warrenlawhorne

    Жыл бұрын

    @@RodGibsonMusic ...after googling it: LOCTITE® 3703 is an acrylic adhesive paste, primarily designed for bonding rigid and flexible PVC to polycarbonate (is what Vistalux panels are made of) where large gap filling capabilities (0.25mm) and a flexible joint are desired. Its flexibility enhances the load bearing and shock absorbing characteristics of the bond area.

  • @faybrianhernandez2416
    @faybrianhernandez24165 жыл бұрын

    Fuck that, I am just gonna squeeze some caulking across the tops of all the rafters, maybe silicon where sheets overlap and use minimal screws to hold it down into the caulking.

  • @Funny-dy5xu
    @Funny-dy5xu3 жыл бұрын

    Using too much screws

  • @kaden7298
    @kaden72986 жыл бұрын

    Don’t buy their screws and those sponges things. It’s ridiculous expensive. They sells screws like those in any hardware and use them spray foam cans. It do a better job but 10 times cheaper.

  • @nadakanak8696

    @nadakanak8696

    5 жыл бұрын

    spray foam cans great idea thanks .

  • @kinrettler2431

    @kinrettler2431

    4 жыл бұрын

    Awesome idea. I am here the foam pieces are 2 feet and $11. Outrageous!!

  • @kaden7298

    @kaden7298

    4 жыл бұрын

    kin rettler 1 can spray foam can for $4 will do about $20 feet and work much better.

  • @dannygraham8550

    @dannygraham8550

    3 жыл бұрын

    I've always tried to figure out how to build a shed for my kids. I tried several plans but always got stuck along the way. I'm glad I found this Ryan's shed plans [ Go Here >>> *WoodBlueprints. Com* ]. It has made the work become as easy and simple as I never thought it will be. Thank you Ryan!?

  • @benl8177

    @benl8177

    3 жыл бұрын

    How does that work? surely spray foam isnt the same shape?

  • @ObscureManifesto
    @ObscureManifesto11 ай бұрын

    Fireworks and dirty rain ruined my clear roof. I don't recommend this in certain areas

  • @bigmikeobama5314
    @bigmikeobama53142 жыл бұрын

    never buy the clear stuff. it only looks good for a while then the scratches make it foggy and dirty looking for most of its lifespan, which is a long time. idk about everywhere but corrugated sheet metal is cheaper than this stuff by a good amount where i live.

  • @TimTools99
    @TimTools992 жыл бұрын

    Why do we need the obnoxious music in the background.

  • @Icutmetal

    @Icutmetal

    4 ай бұрын

    I hate how we were forced to watch it.