Perfect for pushing slush, instead of clogging snowblower! Nice!

@PainterD54

2 ай бұрын

Not really. Those little wheels won't push much snow with so little weight on them. Even if you have chains you won't do much in wet heavy snow. You're better off to install an impeller kit on your machine and learn to blow it out of the way instead of trying to push it.

I gotta lie, this thing looks great!!! Totally not a waste of money….

Bought it, installed it, snow is gone though, but feels very solid, very good weight of all parts. Drill bit provided was useless on my Toro but a good metal step drill did the job. I am guessing that for heavy wet snow that is a chore for the blower , this will be a good , fairly priced for the quality add on. Will leave a proper review next winter!

I think this is a good idea. It's not useful for snow that is dry enough to blow but it is very useful for slushy snow that would clog the chute. If your only other choice is to push that slush by hand this is a great alternative. How do I know? I use a piece of plywood attached to my snowblower for clearing the driveway of slush and it works great. The snowblower is well able to push the slush without strain. For the length of my 100' drive I push it about 1/3 of the way at a time and clear that pile of slush to the side and then continue. Sounds like most of the critics on here have never even tried that simple experiment and are just speculating without experience.

Not a bad idea, it is one I have often wondered about for our two gravel driveways, the blower is very limited when only small amount and ground not frozen. I would get one.

you want to plow, get a pick-up, you want to blow, get a snow-blower

@percyfaith11

4 ай бұрын

you want to plow and blow with the same machine, get a Throwerblade.

@alwayssearching1882

4 ай бұрын

It's called SLUSH dude. Go ahead and shovel your slushy slush.or kiss the clogs.

Next up. Turn your car into a bass boat.

@precisionboatbuilder

5 ай бұрын

😂

@SamSam-ml2go

5 ай бұрын

I'd like to see that one.. lol

I would see this as useful in pushing slushy wet snow that plugs up the snowblower with ice. Concern is the snowblower strong enough to push slushy ice?

@percyfaith11

4 ай бұрын

I do it with a piece of plywood and my 32"Ariens is plenty strong enough to. Traction, not power is the limiting factor.

So you need to manually walk in front of the blower and lift up the blade every time you make a new pass or back up?

this is the silliest thing ever

@_Moto215

5 ай бұрын

I feel like it’s an SNL skit.

@woodnewf3847

5 ай бұрын

@@_Moto215 a really bad SNL skit. 😆

@charlesbeall2589

5 ай бұрын

​@@_Moto215Don't know about "feel like" but I BELIEVE it might be limited in it's usefulness.

@percyfaith11

4 ай бұрын

Not silly at all. I use a piece of plywood to remove slushy snow that would clog the chute. It works great. I'm sure this plow would work well for that.

@woodnewf3847

4 ай бұрын

@@percyfaith11 a snow shovel is this thing they invented. A modern marvel

The auger brackets are not at the same height

****** Questions*******Will this void my manufacturers warranty on a brand new $3,500.00 + snowblower... Will my 212cc gas engine be strong enough, will this do well on a gravel driveway, will this do well on a nice & wet heavy snow that the snowplow pushed in front of my driveway, will this put any extra stress on the traction belt, the friction wheel, friction disc, gears & chains if equipped.........??????????????????????????????????????????. Just asking...

Maybe just a powerd wheel snow cart? This would be heavy and defeating the purpose of the blower.

I agree with the other comment. What use is this. It’s suppose to throw snow. U never mentioned size of drill bit and why die the blade not have a full length cutting edge. It doesn’t go all the way across. Not a purchase I’d make.

Wow, nice option for your snowblower, especially if someone isn't comfortable with blowing snow..no chute direction to worry about or how far it will cast the snow, etc..onto a neighbors car or damage someone's property.

@woodnewf3847

5 ай бұрын

Just a big pile of snow in your driveway to deal with since a snowblower doesn't have the power to push it very far. An awesome tool to ruin the drive train on your snowblower

@blauer2551

5 ай бұрын

Not comfortable blowing snow? Is that snowthrowaphobia? They aren’t complicated.

@robertknight4672

5 ай бұрын

If you don't want to throw the snow very far just keep the top part of the shoot low. Best thing to do is get familiar with the controls. Why do people play with the controls on the shopping for a snowblower in the hardware store.

Been to Shark Tank?

A snowblower is designed to throw snow, not push it. I fail to see any useful or practical application. I notice that you don't offer any either.

@teamdrummond6915

5 ай бұрын

That's for people who enjoy ripping their friction disk to shreds.

@Zeus-dw1cx

5 ай бұрын

Absolutely, what a waste of time

@bccycle1

4 ай бұрын

Slush that plugs the blower

@woodnewf3847

4 ай бұрын

@@bccycle1 slush that plugs the blower will weigh too much for the blower to push. Or break the transmission

@MarkJacksonGaming

4 ай бұрын

-- I agree with you. Friction disk wasn't designed to push heavy snow. Just buy, build an auger kit if you have too, or here's an idea, in real slushy snow, just slow down. Poof! What a concept.

So install this and then it will void any warranty no thanks

this will certainly destroy any warranty on your snow-blower. this heavy blade and brackets add un-necessary strain and weight, causing certain eventual damage and possibly causing injury. If the snow is slush, and its too heavy for your snow-blower, use a shovel to push it to the side or better yet, wait for it to melt. its slush; its already melting.

Why does this even exist! Lol

I just don’t see the need for this attachment. The idea of a snow blower is to throw the snow not just push it.

That will not last in buffalo ny

You want to throw the snow not push it.

Well I just ordered one not😢😂

What a waste of money. I've owned several blowers and the tires spin as soon as the shoot hits dirt so that's not gonna push crap.

This seems like a terrible idea. You don’t need to push heavy/wet snow out of the way. You would be better off adding rubber to the impeller blades to make sure there isn’t a gap so it won’t clog. Plenty of videos on how to do that. good way to damage your snowblower drive mechanism and waste money/increase frustration

My lord how lazy are people! If there isn’t enough snow to use the blower then you get your shovel out! If your to old, weak, or fat to shovel then you budget to pay for a service. If this was meant to fit on a piece of equipment that was not designed for snow removal like a lawnmower it would make sense.

@dlewallen112991

3 ай бұрын

What about slush!? The blade can be used to push slush, instead of clogging snowblower.

@donjohnson3701

3 ай бұрын

Agree! If you are too old to shovel - just move to Florida!

Wtf is this stupid thing. Waste of money

@michaelmcdermott5372

5 ай бұрын

If this was Family Fued, that would be the #1 answer on the board! 😂

Pointless purchases

@terryodriscoll5586

4 ай бұрын

Why not demonstrate use.Im guessing there are some obvious reasons why not.

Snowblower won’t have the HP to push the all that snow 🤦🏻‍♂️