Contact Chonry to get more details! chonry@crpump.com
Website: www.crpump.com
1. Turn off the power supply: Before replacing the peristaltic pump tube, ensure that the power supply is turned off to avoid any electrical hazards.
2. Remove the old tube: Open the pump head and remove the old tube by pulling it out from the rollers. If the tube is stuck, use a pair of pliers to gently pull it out.
3. Clean the pump head: Use a soft cloth or a brush to clean the pump head and rollers to remove any debris or residue from the previous tube.
4. Cut the new tube: Cut the new tube to the required length using a sharp pair of scissors. Ensure that the ends are cut straight to ensure a proper fit.
5. Insert the new tube: Insert one end of the new tube into the pump head and push it through until it comes out the other end.
6. Secure the tube: Place the tube over the rollers and adjust the tension to ensure a tight fit. Make sure that the tube is centered over the rollers.
7. Test the pump: Turn on the power supply and test the pump to ensure that it is working properly.