How to Install RD1 CRV coilovers.
Автокөліктер мен көлік құралдары
How to install MaXpeedingrods coilovers on a 2001 Honda CR-V. Probably one of the easiest installs I’ve done. Great driving and handling characteristics. Pick you up a set in the link below and use the discount code.
15% Discount Code: MOORE
www.maxpeedingrods.com/produc...
Check me out on Instagram :
just1moorehonda...
Follow my Honda Garage page on Facebook
This video is for reference purposes only.
Disclaimer: Due to factors beyond control of Moore Projects, I cannot guarantee against improper use for unauthorized modification of this information. Moore Projects assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Moore Projects.
#Budgetcoilovers #maxpeedingrods #RD1 #pimpmyCrV #egcivic #efcivic #ekcivic #lowbuckbuild #RD2 #HondaCRV #custom #DIY #HowtoInstall
Пікірлер: 74
Just installed mine video was great help thanks they are really not as bad as i thought although rear now is noticably harder but not terrible good for the money ypur review was spot on thanks
Your vids are always super helpful. Thanks!
@MooreProjects
2 жыл бұрын
Thank you for watching buddy
For the damper settings, what did you fine tune it to? Right now I got mines at 24f/20r.
Good stuff and they ship real fast
@MooreProjects
2 жыл бұрын
You’re right! I got mine in 3 days
Do you have a link to where you got the red badges
8:27 way to make something out of nothing with that transition 😂
@MooreProjects
2 жыл бұрын
You like that? Lol I need to do that more often
Hi where i cn buy that spare parts, tq for info..
Where do i find this front lip? Thanks
What is the windshield MPH display? That is slick! How did you do that?
What head unit did you install in your CRV? I'm looking to replace my old stock radio in 2000 CRV.
@MooreProjects
2 жыл бұрын
It’s a Kenwood Double din Media player. DMX706S Doesn’t play cds but it does have apple play which I enjoy using for my Spotify and Maps and charging my iPhone
how’s the ride quality?
How much lower than stock would they be if the set at max ride height?
@MooreProjects
2 жыл бұрын
You can set it basically at stock height in the front and it would be about an inch lowered in the rear at max height
Do the front coilovers needed a spacer inside the fork in order to fit? I have some in my integra and had to install those
@MooreProjects
2 жыл бұрын
No spacer needed
@aaleexsaalaazaar
2 жыл бұрын
@@MooreProjects perfect i hate those things, i like the coilovers really good for the price, ebay chinese coilovers have step up their game. I think im gonna go for those when it comes to it
@MooreProjects
2 жыл бұрын
@@aaleexsaalaazaar do it! I’m enjoying mine so far. I bought a 2nd set for my wife’s CRV
Did u have any problems with the uppper control arm banging the top??
@MooreProjects
2 жыл бұрын
No issues with mine at all. I’ve had them installed for almost a year and still no issues
Chrisfix with a texas accent
Where i cn buy spare parts..just for upper control arms?? Tks informasion..
@MooreProjects
Жыл бұрын
Rockauto.com
How did you determine the ring size for the cylinder bore when you built the b20z
@jakeblowme310
2 жыл бұрын
If you could point me in the right direction with that it would be appreciated
@MooreProjects
2 жыл бұрын
You can take a set of Micrometers and T gages to check it. I asked my machine shop to check it when I had them hone it. So I got a standard set of rings and bearings
@jakeblowme310
2 жыл бұрын
@@MooreProjects thanks so send the block and head to a shop and have them re seat the valves and hone the cylinders? And check the size I’ll need? First engine rebuild just trying to figure it out
@jakeblowme310
2 жыл бұрын
@@MooreProjects before I buy the kit ^
@MooreProjects
2 жыл бұрын
@@jakeblowme310 yes I would take it to a shop and get everything checked by a machine shop so they can verify how much material needs to be taken off for everything to work properly. Then order your rebuild parts according to them. If they are just honing the block and micro polishing the crank, and it’s the first rebuild on the engine, then you can assume to use Standard sized rings and bearing
Where did you get that grill
@MooreProjects
Жыл бұрын
I made it. Used some honeycomb mesh sheet I found on Amazon
Just curious brother, what gauges are those?? I really like the look of those. Any idea where I can get that set? Love the vids man
@MooreProjects
2 жыл бұрын
They have them on eBay. CRV cluster overlay. I love them. Easy to install, just be careful when sliding the overlay over the needles. I broke one of mine and had to source another cluster from the junkyard.
@MooreProjects
2 жыл бұрын
www.ebay.com/itm/Type-R-Red-Glow-97-01-Honda-CRV-CR-V-JDM-Auto-AT-Gauge-Face-Overlay-New-/122798863536?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@bobnichols8555
2 жыл бұрын
Thanks brother. Just got me another 2000. Needs some work though but getting it fixed piece by piece. Love your vids. One more question for you, how are those coilovers holding up? I'm looking at getting those this week.
Does Honda Ballade EK coilovers work on the CRV
@MooreProjects
3 ай бұрын
The fronts would most likely work. But not the rears
@aqilfowler2728
3 ай бұрын
Thank you...I'm in South Africa so I might need to import then......
🤣🤣🤣🤣 I'm in greenville s.c. and before you said it I said "mehhhh the carolina squat😵💫😵💫😵💫"
@tank7562
2 жыл бұрын
Hold up just got your test drive part and seen you're also out here 🤘🏼
How much for the shock absorber sir? I'm new subscriber from Philippines.
@MooreProjects
2 жыл бұрын
Check on MaXpeedingrods.com and use my discount code Moore to get a discount
@aquaman6114
2 жыл бұрын
Thank you so much Sir. It's 274 dollar. Very expensive 😭
And no i highly doubt it bottomed out with that much threads I guarantee you it gripped with the bottom/3rd ring and it started to grip with it causing it to not go down further
@hondahatch3460
Жыл бұрын
I'm pretty sure you're not supposed to spin the whole column. You loosen the 2nd one and spin the top ring to lower it right? Spin the 2nd one to raise it, cause all it does it spin the spindle. Not the springs. Right?
You skipped taking the bolts out of the upper control arms.
you think your fancy with that working dash clock, dont you? lol
@MooreProjects
Жыл бұрын
Actually I converted it to a voltmeter lol the clock never worked, I even tried fixing it
@4000marcdman
Жыл бұрын
@@MooreProjects it's been a year. You still recommend those coil overs?
@dreadio6039
Жыл бұрын
What are those numbers blinking on the winsheild
@4000marcdman
Жыл бұрын
@@dreadio6039 aftermarket heads up display
@MooreProjects
11 ай бұрын
@@dreadio6039 I had a HUD installed that plugged into the OBD2 port and shined on the windshield to show speed. Found on Amazon for $40
Lol, mine is silver and sits about that low also
@MooreProjects
2 жыл бұрын
Do you have an Instagram?
@freakyd7064
2 жыл бұрын
@@MooreProjects yep, its maddscientist69
@freakyd7064
2 жыл бұрын
@@MooreProjects yep, i did the right rear this evening when i got home and sure enough, with adjusting the load on that one wheel improved the ride 100% alone, I'm doing the left rear and the front tomorrow and replacing the lower ball joints so i cant wait till im finished
@freakyd7064
2 жыл бұрын
Man dude, the springs on the rear were adjusted all the way up, there was no spring in them at all, i adjusted the load like you showed in your video and now its like i ride on clouds,, so comfortable that now my wife falls asleep when we go anywhere long distance,, now now in turn my car is soooooo much quieter ... Lol
@freakyd7064
2 жыл бұрын
@@MooreProjects hey, is there a way to adjust the toe in or out on the rear? If you have a video on that will you send me the link,, BTW.. mine sits lower than yours,, i call it the georgia slam, 😁😁😁😁
Take all the preload out anobody need that shit
Not to be mean . But I just installed the same and all I did was lift it up broke the fork bolt and shock loose. Then dropped the spring. I took nothing else loose same for the rear. Other than content I see no reason for all that work you did
@cuddy9215
3 ай бұрын
Dude he literally said at the start of the video that it wasn’t necessary and he was only doing it to replace other parts while he was already in there..
Bro you took apart waayyyyyy more than you needed to just undo the bolt at the bottom of the fork and the bolt at the top of the fork and the two on top u see the hood and done no need to remember the whole brake and axle assembly
@MooreProjects
2 жыл бұрын
I was replacing all of my suspension components. I just wanted to show a better shot of the install for the coilovers
@Hype2k23
11 ай бұрын
Took it right out my mouth.
Не позорься сними эти фендера колхозные 🤬
BRO YOU DO TO MUCH. YOU Confused PEOPLE. Not GOOD 🤦🏻♂️🤦🏻♂️🤦🏻♂️🤦🏻♂️
@MooreProjects
5 ай бұрын
Well I did say at the beginning I was rebuilding all of suspension. So I also made it a better view to see what you were doing. And the upper adjustable control arms are a must if you are lowering unless you grind your factory ones down some so they don’t get stuck in the frame