How to Install Outdoor LED Lighting | This Old House
Тәжірибелік нұсқаулар және стиль
With the pergola built at the Westerly house, electrician Ben Stiles can start installing LED tape lighting. Apprentice De’ Shaun is there to observe and help.
SUBSCRIBE to This Old House: bit.ly/SubscribeThisOldHouse
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
bit.ly/3bnWadr
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet:
bit.ly/34RYEP5
Electrician Ben Giles installs a 12-volt linear LED tape lighting system on the new pergola beams at the Westerly house. He shows apprentice De’Shaun how to cut the two separate wires at different lengths on either end of the connection to make a smaller junction. After twisting the wires together, he solders them and warms up heat shrink to make a watertight junction. Then they install the weatherproof lighting tape right into the track on the underside of the pergola beam.
Follow This Old House:
Facebook: bit.ly/ThisOldHouseFB
Twitter: bit.ly/ThisOldHouseTwitter
Pinterest: bit.ly/ThisOldHousePinterest
Instagram: bit.ly/ThisOldHouseIG
How to Install Outdoor LED Lighting | This Old House
/ thisoldhouse
Пікірлер: 147
At this point I'm beginning to think This Old House is just trolling us by never showing the finished product.
@timbohouston
3 жыл бұрын
They showed us how to install outdoor led lighting.
@opnekryan
3 жыл бұрын
@@timbohouston Yeah but this is like watching a cooking show that never shows you how the food looks cooked.
@MrMerithra
2 жыл бұрын
Yep. Downvoted the video to oblivion. What the hell is wrong with them?
Wtf, no party time?
film crew didn’t want to stick around to get the night shot lol
@1stWorldProblemsSolved
3 жыл бұрын
Must have been a shady neighborhood.
@mrgalvez11
3 жыл бұрын
Actually, that's a nice looking home. And when you see the full episode, you see a nice neighborhood. But then you go to your mom's hood and everything looks like crap.
@bixbabble3935
3 жыл бұрын
At least they could’ve gotten a pic from the home owner.
@1stWorldProblemsSolved
3 жыл бұрын
@Marty McFly You have your terms confused...race isn't a factor of a persons' poor living conditions in a economically-depressed-area. That's choice.
Come on. show what it looks like in the dark.
And the finished product demonstration? Lol
@liamwelty1028
3 жыл бұрын
As is customary with toh you dont get to see the finished product😂😂😂
@pepsicolachao4537
3 жыл бұрын
Not this video unfortunately.
@MegaGsizzle
3 жыл бұрын
They left the job site and never went back at night to see lol
@hotmeds
3 жыл бұрын
You weren’t invited to the party.
@julien801
3 жыл бұрын
They pluged it on 120v ... boommm
Should have shown the lights at night.
@pepsicolachao4537
3 жыл бұрын
Pat Masherelli I’m sorry, there is no product demonstration on this video
This video was absolutely pointless.
"How to" - But where did that mythical 12v supply wire hanging out come from?? This is the equivalent of saying how to add a new light receptacle, but not showing the wires being ran or junction box being installed, only showing the fixture being wired up.
@MegaGsizzle
3 жыл бұрын
It’s all for tv. Nothing was connected lol
@Eagle209Scout
3 жыл бұрын
Really. I did a very similar project for my deck, so I know all of the things they did not show. Big let down for me.
Omg why wouldn't you show us the outcome???
how to install outdoor lighting finished product: some imagination required.
Show the result!!
Hello, could you please provide a link to the actual lighting system that’s being demonstrated in this video?
Soooooo, how did it look at night?!!
@HAMRADIOJOE4178
3 жыл бұрын
:-(
How to peel tape backing. Thanks.
Instead of the electrical tape use a large diameter shrink tubing to slide over both wires.
@SupraRy
3 жыл бұрын
@@Kevin-mp5of kidding right? That wire was tucked up into the vynl and will never see water and they fully shrinked and taped the connections anyway. A full length shrink would barely make a difference. Almost overkill.
@SupraRy
3 жыл бұрын
@@Kevin-mp5of do you honestly think that homeowner will EVER have an issue with that connection? Seriously
Homeowner turned on lights later that night...blew a fuse in the electrical box then outside canopy caught 🔥
@t1n4444
3 жыл бұрын
How did you guess???!!! As if by wild coincidence I gather ToH are featuring an entire house rebuild ... in that very location ... Mad or wot!!?
Running the cable is the hard part of that job, but I guess that’s best left to a pro. But don’t fit the cover into the track before testing that the strip lights up! You don’t have to wait until dark for that, although showing us the finished effect after sunset would have been the obvious and professional thing to do.
3:54 Wait until it's dark? It would have been nice if they would have said that stand then they would have gone to a dark scene and showed the lights and how they looked at night?
I think we all agree they left without showing us how it looked in the night.🤦♂️
What happened to party time?
Nice little educational video, but on an exterior application where do you place the LED driver so that it is not an eye sore and protected from the elements.
Wish I coils see the finish product as well and maybe link to the product.
Beautiful
Heat shrink tubing is not a waterproof connection.
@pepsicolachao4537
3 жыл бұрын
You’re right.
@pepsicolachao4537
3 жыл бұрын
But he wrapped the wires in electrical tape
@elitheelectronicsguy
3 жыл бұрын
Oh ya I forgot electrical tape is waterproof! Lol I mean don’t get me wrong were they put the connection it will be perfectly fine but it’s not a watertight connection.
@t1n4444
3 жыл бұрын
Well, the wiring is inside what is effectively plastic trunking, and is only 12v. Not exactly a hazard.
@t1n4444
3 жыл бұрын
@@elitheelectronicsguy Could have used self amalgamating tape I suppose.
They should put the products they use in the description.
Hmm, why use such an old fashioned method? Soldering went out with the Ark. If you get a duff joint then back to the beginning. And why no test before applying the shrink wrap? All in all not a very satisfactory demonstration. Might be a more sensible method to use bootlace ferrules and Wago 221 connectors. At least you can get a meter on the test point for fault finding.
I wanted to see the finished project
Another successful finished product demonstration....Jesus...KZread amateurs are better than this.
here are wires that magically grow out of the house
Cool application but what about getting the power supply install ? would be just as - or more - helpful
What was the product being used? Any links for the lights? I would love to install these lights around my house!
Nice gonna have to suggest to my customers
How do you not show the finished product?
Electrician here. Not going to be bright enough LOL I would’ve installed a track on every other beam
Its a benificial vid👍
How do you guys NOT have a shot of the nighttime finished job?
Aaaaaaand no need to test it. Moving on!
Thumb down at least a picture of the finished product....
@johnwheeler4409
3 жыл бұрын
I agree with you this is really a disservice for the viewer who may be on the fence about spending the extra money for something like that.
Could you please tell me the website you order the parts from.
@t1n4444
3 жыл бұрын
Amazon, cheap as, and some have remote to change colours. Might have to source a PSU to convert mains to 5v or possibly 12v, but again cheap as.
About 58 seconds into the video the UL listing number and company name are shown. Alloy LED
Add a short clip at end so we can see it light up in the night.
This old house videos give me blue balls. "Let's see how it looks... just kidding, bye!"
Mine comes without backing tape on it !! I don't know how to use it ..
3:03 you never do what at 120v junction? What is okay because it's 12 volt junction?
I was hoping to see a night video shot with the lights on
Needs to learn what Flux is and how to use it, If you notice the connection after he soldered it youi can still see bare copper in the solder joint. Flux core solder is NOT what it's hyped up to be, Theres so little flux in the solder you have to flood the joint with solder to get enough solder to slean and prep the connection. No-corrode solder paste is the only way to do it.
This channel is just a continuous rick roll.
What happened to the original sparky?
Probably didn’t work.
It looked great at night...oh wait 🤔
The apprentice appears to like his apprenticeship
Come on guys show the product and the end result. Thank you
those lights looked great wtf
Hey TOH, What is happening to your videos??? This new format is not working.
@t1n4444
3 жыл бұрын
Possibly they have a new production team who are tasked with editing entire ToH TV episodes down to a few minutes solely for posting on YT? Perhaps they have edited an entire sequence into bite size chunks so easily and readily digested? Perhaps next time we see the apprentice being trained on how the work the light switch?
Still don't have any idea of how to install this
That solder job was terrible, he was painting that solder on vs letting it flow. There are a lot of people asking where is the finished product but these are more in depth shorts that come from full episodes.
There are solderjoints on the market who solder and shrink in one pass... Why don’t you use this? I recommend to run a thicker power cable with the strip and connect them every few ft. especially on longer strips. If not the most away from power feed are way darker than the ones close to the connector. And btw: a ledstrip is nothing without a proper controller and a gateway to your home automation system. Pls see thehookup or dr zzzs channel to get to actual standards.
@s.n.9485
2 жыл бұрын
In my experience most customers just want a regular on/off switch, or dimmer switch at the most.
Assume this didn't work in the end?
Bad connection ? Didn’t work ? Hello
Turn the brightness down on you iPad or computer to view lighting 😆😆
I guess the double waterproof connection didn’t work
You never show the end result. C'mon!!
U know if you posted the product info and showed the final project results you'd probable sale a bunch and make some money.....
@Jg.Wentworth.877cashnow
3 жыл бұрын
They dont "sale" the product.
@RagnarOdinsson
3 жыл бұрын
@@Jg.Wentworth.877cashnow with a lick of business sence they'd get a percent.
@s.n.9485
2 жыл бұрын
@@RagnarOdinsson you should make a video doing it right. make some money.
Is it just me or did we not even get to see the results?
@Jg.Wentworth.877cashnow
3 жыл бұрын
Just you. Watch again.
When’s the party?
Thanks for NOT showing a ta da moment lighting them up at night!
These segments suck.
They started half way through the install when the transformer installed and wire run... Then didn't get a night shot of it lit up... Ummmm, why are you showing this video @ThisOldHouse?
Love this apprenticeship series ... Give people an opportunity to do and they will!!
I miss Scott
"Oooooh! That turned out great!"
no night shot. shoddy video production. lol
AND?
SO................... Do they live in Alaska?? It never got dark. We are still waiting. 🤔🤦🏽♂️
Did not even show the results of what it looked like. Also a little vague on the details.
Where’s The most satisfying part of the video?
I WANA SEE IT AT NIGHT..................O MAN, NO FAIR
Don't forget the thumbs down when you leave!!!
Wait..... What... Come back and turn the lights on you left me in the dark.
De’shaun is in the house yo, party gon be lit
Without fail. No finished product every time.
Ways This Old House failed in this video. 1) Did not show how to run power or LED driver unit (if applicable)
This could have been a lot better if they used Wifi connected LED smart light tape.
Come on...could've taken a vid at night!
It doesn't work, eh?
They literally just showed us how to shrink tube 2 wires and peel an adhesive back. Well done TOH! (useless)
Indian current voltage 230 50 HZ is urs cuntry
it didn't work so you didn't show us the end? 🤥🤥🤥🤥🤥🤥🤥
Ridiculous!
And it never worked lol..
Another crap video from TOH. Looks like this is the new normal. I’m out.
So I watch the entire video and then you don't show the end product on how it looks at night, what a joke.
This whole comment section is a bunch of cry babies.
Downvoted it cause it didn’t show the finished product in action
After all that they don't show what it looked like at night. Boo!
Bob Vila is not impressed. Guess ToH is dead.
Who even is this?
You did it totally wrong Doug.
Love your videos even keeping them up In the pandemic
The fact that they didn't show it lit up at night for the finished project, tells me that this came out terrible and didn't work. WTG TOH! 👎