How to install Orbis Overlanding Rack Wing on Subaru Outback Wilderness
Тәжірибелік нұсқаулар және стиль
Hello Everyone,
Today we going to install Orbis Overlanding Rack Wing and Molle Panel on the rear of the seat.
hopefully, this will help out someone who is interested in the Rack Wing but didn't know how they were mounted.
#orbisoverlanding #subaru #subaruoutbackwilderness
www.orbisoverlanding.com/rack...
5% off Code - Use "ChasingAdventures" at checkout
Subaru Outback Wilderness Mods:
Amazon List : www.amazon.com/shop/chasingad...
Non Amazon:
- LP Aventure LP1 17x7.5 20mm Offset : tinyurl.com/muwdwukc
- Mickey Thompson Baja Boss AT 245/65/17 : tinyurl.com/3rh4d66v
- LP Aventure Ditch Light Brackets : tinyurl.com/4appdw3t
- Novsight 2 Inch LED Spot Pod Ditch Light : tinyurl.com/yc4s3mx7
- Novsight 3 Inch LED Flood Pod Ditch Light : tinyurl.com/u4dnvakh
(Use "CHASINGADV25" Discount Code for 20% off at Novsight)
- Orbis Overlanding Rack Wing and Molle Panel : tinyurl.com/mw2nd8wt
(Use "CHASINGADVENTURES" Discount Code for 5% off at Orbis Overlanding)
- Rotopax 1.75 Fuel Containers : rotopax.com/blems/
- Gorilla Clamps : gorillaclamp.com/
- Her Necklace : / hernecklace.today
- SMK Fabrication mount : tinyurl.com/4c3ke8zf
- Screen ProTech : tinyurl.com/yck92tt5
(Use Discount Code "ChasingADV10" for 10% Off)
Camping : tinyurl.com/2p9chr72
Subaru Outback Wilderness : tinyurl.com/yhujhv3a
Camping Gear Reviews : tinyurl.com/yckwe2nt
Travel : tinyurl.com/y6tdtyub
Also check us out at:
IG: / _chasingadventures_
FB: / chasingadv
Пікірлер: 75
Love your Outback videos! Currently waiting on my 2023 Outback to arrive and it's killing me!
@ChasingAdventuresCO
Жыл бұрын
Hello, thank you for your comment. I really appreciate it! When is yours supposed to arrive? Mine came in whole month early. I hope you gets your soon.!
10:45 You could buy a bicycle tire inner tube and split it open, then cut pieces of that tube to go where you want (between the rail and that new rack for example). It’s thick enough but not overly thick (and stronger than that foam) and it would prevent rubbing. And it’s cheap and easy.
@ChasingAdventuresCO
Жыл бұрын
That's a good idea 💡 👍
These videos are really helpful! Thank you
@ChasingAdventuresCO
Жыл бұрын
Hello Jeff. Thank for that comment. I really appreciate it! 🙏
Great video. Been thinking about getting some wings
@ChasingAdventuresCO
Жыл бұрын
Hello, thank you for the comment and you should get one. Remember to use my discount code. I know it's not much but still helps.
I am so glad I found your channel! I just got my first Subaru, a 2022 Forester Sport. I can't wait to take her camping, and I will definitely be getting some of these mounts. Have you had any concerns or anything you noticed with the mount being suction-cupped to the window? That is my only worry. Thanks! Can't wait to see your future adventures!
@ChasingAdventuresCO
Жыл бұрын
Hello, thank you for your comment. I really appreciate it! 🙏 and congratulations on your purchase~ I had the same concern before purchasing and had to check few time looking out through the rear view mirror to see if it's still on or flapping around. Lol. But it's been holding pretty good. And we had some cold weather and had no issues. I do have a discount code in my description so take a advantage of that if you are going to get one.~ have lots of great memories with your forester!
Great Video Thanks for sharing. Glad your happy with them both. Good feedback on the bracket and the foam piece, it looks like maybe for the OBW a bit thicker foam strip would be worthwhile. I'll do some looking into that!
@ChasingAdventuresCO
Жыл бұрын
Thanks for making an awesome product for our Subies. if you do find a thicker foam/rubber strip let me know.
@mattvogelsong8460
Жыл бұрын
I got my rack wing for my wilderness almost a year ago and I cannot get that thing to fit to save my life. I opted for the yakima brackets but even so I had to source some hardware and make a spacer because the suction cup would sit on the window at the right angle. Did you change or update the brackets for the wing on the wilderness? This seems to fit way better
@ChasingAdventuresCO
Жыл бұрын
@Orbisoverlanding can hopefully answer your question.
Looks good bro!!! I would just cut a tire tube and wrap the rail where your bracket is going to be mounted ants you’ll be all set.
@ChasingAdventuresCO
Жыл бұрын
Thank you and that is a very good IDEA!! I will implement that.
Thanks for the web discounts, Just got a set of 3” and 4.5” lights from Cyber .
@ChasingAdventuresCO
6 ай бұрын
nice!
Love your videos! Was wondering what type of Thule rack you’re using? I like the sleek look of it!
@ChasingAdventuresCO
Жыл бұрын
Hello Chris. Thank you and I believe it's the aeroblade edge 7502b. All the parts for the car is listed in my description.
Great channel! I just got the 2023 outback wilderness. And I looked on the site for the wing rack. Will they properly fit on my model? Thanks ! Keep up the good work!
@ChasingAdventuresCO
Жыл бұрын
Hi Kevin, congratulations on your purchase! And yes~ they will fit and I have a discount code on my description 😉 have fun with your new wagon!~
Love the videos and the progress you've made on your Outback...it's looking mean!! Quick question, who makes your rain/wind guards? I have 2020 Outback XT & and do not like Subaru option with chrome top and flat/bulky look.
@ChasingAdventuresCO
Жыл бұрын
Hey John, thanks and I think so too~ 😀 the rain guard is Amazon brand. If you look at my description, I put a link to all my parts. I also did not like the chrome window trims as well so I went with the Amazon brand and can't beat the price.
I would mount my S&W FPC, med kit, fire suppression and extra magazines for my side arm. (seat molle) The wings are kinda cool.
@ChasingAdventuresCO
Жыл бұрын
That's will be a cool set up! 😎
Hey! I really love your channel I’m always watching your videos.. just wondering on your discount on orbis over landing if it’s still working?
@ChasingAdventuresCO
2 ай бұрын
Long time! Hope you are doing well!! Yes, it should be. If there any issue, please let me know.
Hi again Chasing Adventures. I got my Molle Panel from Orbis today, another purchase thanks to your videos! The issue I am having is I was only supplied with 1 strap. I was given two sets of buckles and plastic pieces. Did you get two straps or did you cut yours in half or something like that? Love my Her Necklace lights btw. Thanks again
@ChasingAdventuresCO
10 ай бұрын
Hello, I only received 1 strap as well. I cut to length and used the buckles to strap to the headrest and used the rest of the strap on the bottom and tied a knot. I do wish they would have provided two straps and more buckles..
Great install. I was wondering too about the ‘u’ clamps (that’s what I’m calling them, lol) that is on the roof rack, I was concerned about it chaffing. Have you seen any issues with that? I thought it would be a good idea to have some kind of rubber sleeve on these parts as well as maybe a thicker rubber piece between the wing base and the roof rack. It’s just a lot of areas if one is concerned with chaffing. Your thoughts…
@ChasingAdventuresCO
Жыл бұрын
Hi David. That was also my concern but so far it's looks fine. Others have suggested that I should put a shrink wrap, plasti dip them but honestly since the U clamps don't move, I don't think it's necessary. But if I were to do it again from, I would use at least a shrink wrap just to be on the safe side. Won't hurt!
I'd try to figure out some way of securing them also as a deterrent from theft. The bare u brackets are going to eventually rub away at the finish on the rails also. Maybe get some black rubber hose tubing from the auto store where they have various sizes and slip them over the u bolts. It'll provide some sort of protection at least. And it'll also help the brackets blend in better visually.
@ChasingAdventuresCO
Жыл бұрын
Hello Bubba. Thank you for your suggestion. I also was thinking of ways to protect my rails and your idea is fantastic. And it will help with corrosion too I hope.
@bubbalo3388
Жыл бұрын
@@ChasingAdventuresCO you can apply some Plasti Dip on the u bolts for corrosion protection before you slide the rubber tubing on. And then cover the nuts with some also. The stuff is like a rubber coating that you can peel off if you change your mind.
@ChasingAdventuresCO
Жыл бұрын
@@bubbalo3388 again another great 💡. Yes I've used plasti-dip for long time on many parts of the cars. Especially on emblems and wheels. LoL. Thanks again!
I believe the hinges are there so you can release suction cup and clean the window. It would drive me crazy if I couldn’t clean a dirty window.
@ChasingAdventuresCO
Жыл бұрын
Hello and thank you for your comment and yes that is the main reason and to get to the bolts for your accessories easier as well~
What size of the Thule bars did you get? REI is convinced these wont fit on the OBW but your video makes it pretty clear they work...
@ChasingAdventuresCO
Жыл бұрын
Hello Nick. I purchased them used and was on Forester before and I believe the Part# is 7503B and just by measuring the length of the bars it measures at 33inch. so if you get one for forester it will work with our OBW
Love the Rack Wing !!Looks Great !! But... Would have liked the mounting hardware screws to be black to keep it all clean. My eyes go right to the silver in the screws. OCD...
@ChasingAdventuresCO
Жыл бұрын
Haha, I wished that, too, and was thinking of painting them (Slight OCD here), but I got used to it and looks more rugged to me. 😆
Great install. Did you add tinting to the OBW windows or is that the factory original. Your windows seem darker than mine.
@ChasingAdventuresCO
Жыл бұрын
Hello Jun, Thank you for your comment and yes its tinted. I tinted all around and you can find the video here. kzread.info/dash/bejne/p4uIlZpxmKncf5c.html
vraiment beau ton Outback il est dur sur le gaz? 13,9 avg
Neat design but it looks like he or she stopped midway in the design process in regard to aesthetics and look. Those u-bolts at the very least could have been powder coated so that they aren't so obvious. A better solution would be to have a cutting fitment option that not only does the job but is also pleasing to the eye. Attention to detail in regards to a final design is everything.
@ChasingAdventuresCO
10 ай бұрын
Good eye!
What did you black out the emblems with ? Just wrapped them or overlay kit ?
@ChasingAdventuresCO
Жыл бұрын
Hello Rob. Thank you for the comment and it's plasti-dip spray paint. It was super easy to apply.
what's the static load for your thule cross bars sir? I know thats not the one they have at Subaru for wilderness but I like yours more. it looks cleaner
@ChasingAdventuresCO
Жыл бұрын
Hello Timothy, I also picked out this because it looks much cleaner than the factory offering and the load raring is 165lbs to that of aero extended is 176lbs in motion and 700lbs parked. So if you are planning to put a rooftop tent or carry heavy load I would just go with the factory offering but for my needs it works great.
@timothyj.2937
Жыл бұрын
@@ChasingAdventuresCO oh cool! Thanks for this info. So yours compared to the factory one is only 10 pounds difference or am I missing something?
@ChasingAdventuresCO
Жыл бұрын
@@timothyj.2937 yes only 10lbs different but the factory ones could handle 700lbs when parked.. I don't know what mine is rated when parked but I guess to play safe if you are going to load that much.
How’s it holding up after a year? Are you leaving it on or removing and adding back on before trips ?
@ChasingAdventuresCO
3 ай бұрын
It is holding up just fine! I only remove the RotoPax gas tank when I drive around town.
On their website there the rack wing mounting solution, and back wing accessory mount, do you have to purchase both?
@ChasingAdventuresCO
6 ай бұрын
I dont think so. I just purchased the rack wing and picked out the option for my car's roof rail.
@TheSkierxing123
6 ай бұрын
@@ChasingAdventuresCO thanks! About to purchase but Orbis overlanding hasn’t gotten back to me to answer that question. Your fitment is OEM roof rail correct?
@ChasingAdventuresCO
6 ай бұрын
@@TheSkierxing123 Yes, select OEM roof rack
What are these for? What is their function and purpose? I saw how you mounted roto packs. What else could you use them for?
@ChasingAdventuresCO
Жыл бұрын
Hello Dawson, Main purpose for these rack wings are for the RotoPax. and I put up lights, Axe, and shovel for those sticky situation.
@Zanderthelab
Жыл бұрын
@@ChasingAdventuresCO oh shoot I never even thought of that stuff.
@ChasingAdventuresCO
Жыл бұрын
@@Zanderthelab well, you can view my other video where I install everything I mentioned here. kzread.info/dash/bejne/i3uFpbGHn6itZtY.html&lc=Ugx2Qv-NbnhTC4_mzFJ4AaABAg
Would it work for a 2017 Subaru Outback
@ChasingAdventuresCO
9 ай бұрын
I think so.
Will this fit a non wilderness 2024 outback?
@ChasingAdventuresCO
2 ай бұрын
I believe so.
Been wanting these for my OBW, how is the freeway noise?
@ChasingAdventuresCO
9 ай бұрын
non at all.
@AsianDisgrace
9 ай бұрын
@@ChasingAdventuresCO Sold! Thanks for the speedy reply. Love the channel.
@ChasingAdventuresCO
9 ай бұрын
@@AsianDisgrace Thank you! !
That thing is way too expensive
@ChasingAdventuresCO
Жыл бұрын
It's not cheap!
This is such a waste of money.... Barely has any use, will look like sh1t after sand and sun polishing... wow
@ChasingAdventuresCO
7 ай бұрын
Glad I could help you with your buying decision