Thank you NSK for this in depth presentation of ballscrew aligment. 11:23, got me fooled into thinking it is in 1 micron, but actually guage isn't touching mount.

@annaarze603

5 жыл бұрын

😂

@manwithaknife4642

Жыл бұрын

😂

i love that luxurious CNC parts, it's must be extremely accuracy

@user-tw9io9nz2m

5 жыл бұрын

I don't see how it's luxurious, it's either in or out of tolerance

@mohmadai1113

5 жыл бұрын

.

When we talk about extreme engineering! Very nice! :-)

@mohammadarshad3221

4 жыл бұрын

G

Its a really nice video. what kind of measurement that you used to measure the driving torque?

Thank you very much for making this video. it was very helpful for my work. Please make more videos from now on

excelente video amigo tremendo trabajo de precision desde venezuela saludos y exitos . subir mas videos como estos

Really thank you very much,

WOW ball screw passion!

As perfect as it could be.

Excelent....!!!!

I work, assembled machines with the same structure, only they have, a tank between the rails. My problem has been aligning the rails on each side, to ensure parallelism and squareness. The rails are located at a distance of 3 meters from each other. Do you know any technical and effective alignment system. Well, I do it empirically with a tensioned steel wire.

The surfaces of these pieces are not grinding? centering settings are okay, but why do you look for the flatness?

Its very good mathod for training

Well done very useful

Who manufacturers that torque measurement device?

Thank's for translating

I like this video very much. Is there a motor installation video? 私はこのビデオがとても好きです。モーター取り付けビデオはありますか？

*_-I had a wet dream about this-_*

@chanakyasinha8046

5 жыл бұрын

I have reality about this

Looking at this standing next to my 3018 mini cnc with T8 lead screws 😂😂😂😂😂

We make one scissor lift use ball screw but it up nd down that time ball screw make noises. What will be reaon

Dat micrometer staying still got me...

senang sekali ada manual bahasa indonesianya, tapi beli produknya dimana diindonesia ya...

I wish I could afford this conversion for my mill. 😞

Wipe the surface with the uncovered hand, apply some oil to stop corrosion which loves to start where surfaces meet.

No Minuto 3 ao apertar o eixo desalinha, o bloco poderia ser apertado anteriormento, ou construido com pino guia?

@edex-automacaoindustrial2731

11 ай бұрын

me pergunto como ele removeu aquele suporte pra apoio de acrilico

does anybody know the name of the first song?

Jajajaja, Buena medicion con el comparador en el minuto 4:00 !

@serdarcal

2 жыл бұрын

there are too many mistakes

very good

Hi from where can buy that in Algeria

I want that on my next mini mill

@blacksimpson

Жыл бұрын

Joke?

Please confirm the cost for the same .I m also in que to purchase the same . Waiting your reply. East india company. India

@-cncheechoo9062

4 жыл бұрын

you can search on Amazon-us

Se ve fácil así pero cambiar un Ball screw en mi na máquina es bastante incómodo pues no hay tanta movilidad como ahi

We produce high temperature resistant all-metal linear guide blocks

Tuyệt vời

thanks mister

Очень мощный узел!

@VOLK-68

4 жыл бұрын

там теперь шпиндель как слона)

What is that device used for measuring the drive torque at 8:55??

@KKhhoorrnniittee

6 жыл бұрын

I guess it's an older style of torque wrench, where a springy piece is bent while applying torque and you read it on the scale.

@andreferrato

6 жыл бұрын

I see, it seens to be a pretty nice way to have an estimative... can't find one to buy :/

@ianpendlebury3704

6 жыл бұрын

Often called a 'deflection beam' torque wrench.

@claudelussier1678

5 жыл бұрын

Canadian Tire has some, but a little bit bigger.

@prototype8861

3 жыл бұрын

You can use any hand scale. Common sense tells me so.

a new attempt of writing subtitle on right time

عالی

Kaise fit karte Hain

值得学习

At 4:15 he touched the dial indicator leg which may affect the accuracy

@damiendeline4632

4 жыл бұрын

It's inaccurate to use an indicator at an angle like that anyway. You want the tip of the indicator as parallel with the surface as possible

@aampudia8

4 жыл бұрын

@@damiendeline4632 but he just needs it to be 0 in both cases... so the angle doesn't matter, as long as it is the same on both sides...

@phillhuddleston9445

Жыл бұрын

@@damiendeline4632 actually it is most accurate at a set degree, I think it's around 15 degrees but don't quote me on that number.

For what?

العالميه جلاس للتصنيع

Hi everybody I am gonna ask a question; What is the name of the measurement in at 8:58 ? Does anyone knows?

@danielwolfe8

5 жыл бұрын

They're measuring torque required to turn ball screw

@georgevukelich607

3 жыл бұрын

@@danielwolfe8 , who manufacturers that instrument, i can't find that specific one anywhere?

Tuyệt đối

Wow the Japanese really do have small hands

@user-tq3dh4hn1n

2 ай бұрын

你小子😂！

حلو

@jiji1146

5 жыл бұрын

V ū

Watashi no namae wa dede nurujaman tomoshimasu. Watashi wa 10 nen kan indonesia de NSK no Kaisha ni shigoto shita koto ga arimasu.

Sorry ! I discover 11:03-11:23 dial indicator measurement and calibration not vertical no touch

he failed to make all the parts flush before tightening hope its not re finished

11:27 Ловкость рук и никакого машенства (с) Пролетаем над отверстием а индикатор не дрыгается. Вообще думал всё "у их" после обработки должно само после сборки в размер встать. А оно вон чё. Кияночки, подкладочки.

@MrGorisont

6 жыл бұрын

Евгений ЧПУ отака хуйня, малята

@mafiarkgamer4917

5 жыл бұрын

OK

que chiste es ese de medir el usillo con el comparador en un extremo, sacarlo del bloque y medirlo en el otro?, es una cargada no?.

@gegrossi3741

4 жыл бұрын

JUAN BERMUDEZ la base tiene encastre Juan...

imagine I prepare a cake then when I finish I didnt show you how it looks like..

دقة لامتناهية انها حقا عمل عباقرة

good, interesting video with annoying music

That's not an actual motor, is it?

@DUIofPhysics

6 жыл бұрын

no! just a dummy piece for some reason :(

@MichaelDeeringMHC

5 жыл бұрын

I thought the motor looked a bit small.

In this design alignment of assembly is very much dependent on bolts and I don't like it. I prefer a dowel pin based design or resting faces with compression push type design

14:24 too long linear rails it never use right side end.cut them of and sell it cheaper or desing table so it go over longer travel ask more money with same used metal lol

@joeygonzo

3 жыл бұрын

huh?

like 250

@younglogin

6 жыл бұрын

É Miza veio parar aqui também né, quando vejo essas Guias, Fusos, e o tanto que a montagem é técnica e precisa vejo o quanto nossas máquinas são limitadas, no vídeo que eles montam as guias nessa base aí deu pra ver que o relógio apalpador tem escala milesimal de "0,002mm" o ponteiro nem balança kkkkk quem sabe no futuro não temos a oportunidade de ter máquinas com a qualidade dessas aí :)

I prefer dowel pin alignment.

@blacksimpson

Жыл бұрын

Why?

@MichaelDeeringMHC

Жыл бұрын

@@blacksimpson Because dowel pin holes can be drilled with your CNC machine and are as accurate as your machine and your machining skill. Then you can assemble and disassemble the parts and know that they are going back in the same place. I don't like the process of measurement, adjustment, and bolt tightening, compared to just cleaning all the surfaces and letting the dowel pins handle the positioning before tightening.

screw rod 1400 mm lenth

10:45 You could get massive cosine error from that Great presentation nonetheless

@yoshikazuobatake6905

5 жыл бұрын

Hi, can you explain please ?

@AliHureiby

5 жыл бұрын

if you plan to center that hole to the ballscrew, yes that is the wrong method. But he use that method to adjust the height between right and left ballscrew support (see he add shim to add height 11:11). Do you think that NSK engineering is that stupid LOL.

@user-tw9io9nz2m

5 жыл бұрын

That operation wasn't to center the support bore to the ballscrew. It was to get the bore of the support parallel to the bore of the ball screw. The centering of the support bore to the ball screw happens later at 11:41

@scotthamilton7556

5 жыл бұрын

I think the point that 404BYTE was trying to make was, anybody who uses an indicator knows that the set-up shown is horrible. If some engineer set up that indicator, yes they are stupid.

@user-tw9io9nz2m

5 жыл бұрын

The shown setup does get cosine error, but that's irrelevant. The technician aims to get the needle to stay on 0 the whole way around. If you're concerned with real errors, how about gravity? To correctly inspect anything with an indicator attached to a spindle, the spindle should be vertical to even out the gravitational pull over the rotation. Depending on the setup this can make a couple of microns of difference. On a horizontal spindle the indicator (and the arm that holds it) will be pulled in opposite directions when it's in the upwards or downwards positions.

There is never good work , when you use shims. The right way was scratching and measurment and scratching and measurment....

@user-tw9io9nz2m

5 жыл бұрын

There is also the difference in hours and hours versus 2 minutes of work. Shims aren't ideal, but they're plenty good enough.

@markferrari9734

5 жыл бұрын

When you are building a machine that is selling for close to a million dollars, shims are not good enough. I machine one block to print and leave .010 on the mounting surface of the other one or 2 blocks. Test fit, measure and grind till the fit is perfect. It only takes an extra 2 hours or so per axis.

@user-tw9io9nz2m

5 жыл бұрын

If you have the capability to finish grind, that's the way to go. A perfectly ground surface will obviously increase rigidity over shimming a fit. It seems to me this video is aimed towards companies that build machines on an assembly line that aren't anywhere near a million dollars. For them, NSK offers a bolt-in solution that's quick and easy to align.

@haydenverstin7326

5 жыл бұрын

In a perfect world you wouldn't need shims but this is the real world and there's a good chance you will need them and also at some point you will so this is partial in terms of cost and practical accuracy ... there is no point trying to get a spindle to with 0.002mm when a lathe isn't going to be doing stuff like that but 0.007 will so shimming is the only way to fix that without pulling it all apart and sent off to get worked on... Had technicians work on a Victor lathe that was new and it was a little out as the U-drilling on that machine was strange so digital stethoscopes and so some tighting and smacks and turning the spindle brake down a hair fixed it ..went from 0.009mm to 0.006mm out and was considered good without pulling the machine out and in less than 3 hours...

Amatör

bangelor

@ 10:45 seconds the angle on that test indicator is the most ridiculous thing I've ever seen. How could NSK even produce that, hard to believe anything in this video after watching that

장갑을 끼지말고 작업을해야죠

N

no1 fast thired

4:44 - fuck, he hold the measurement tool by hand!!! This is so amateur, because he will crook the tool and measurements will be not correct.

@saikumarsketches1775

3 жыл бұрын

Triggered out 👏

@budbarlang3729

2 жыл бұрын

you're right he should have move the ball screw nut to one the end so he can measure the DTI along the length of the ball screw out disturb the DTI.

kzread.info/dash/bejne/g2ShmJJudae7Zc4.html go here too: put gears on one end.

Коментов по сборке на русском языке, увы нет.

This makes me look very poor.

there are too many mistakes

手袋はあかんやろ、素手でやらんか

Fake 3:40 till 4:17 If you can't do it right. Don't do it at all. So disappointing

I'm mechanical engineer. lousy workmanship. not sure of tolerances. This apparatus does not work linearly