👉DRL Turn Signal Strip Amazon: amzn.to/33RBitf

Soon as weather is good this is my next project

Great work and dedication!! I didn’t realize the bays in these were so unserviceable

@AutoSensation

3 жыл бұрын

Thanks.

Love your channel I just bought a 2022 pilot and have been absorbing your info on it. Thank you again.

@AutoSensation

Жыл бұрын

Congrats and thanks for your support.

Does it prevent the rubber trim from seating flush with the top of the headlight? Wouldn't that cause water/moisture issues inside the engine bay?

@AutoSensation

11 ай бұрын

No water issues at all

I'm curious how u were able to sauder the wires in such a small place. I would've thought to take the part you wished to sauder out then put it back in.

@AutoSensation

Жыл бұрын

First I pre-wired before I installed. Then you can use something like these. amzn.to/3YRuoPO

Is the led strip mounted in front of the hood weather strip (outside engine bay) or behind the hood weather strip (inside engine bay)?

@AutoSensation

3 жыл бұрын

I mounted the LED strip to the edge of the headlight. The hood weather strip will be directly sitting on the LED strip when the hood is closed.

@christopherder2578

3 жыл бұрын

@@AutoSensation Thanks!

I Wonder if you can install them on the back of a car without connecting the wire for the drl light. Just the turn signal and ground wire.

@AutoSensation

Жыл бұрын

Yes I believe you can. Just connect the yellow and the black wire

How are they today, did it last, still working and bright?

@AutoSensation

9 ай бұрын

Yes still working. Not as brght as day one but not noticeable.

Love Honda, Everything can be done one handed while shooting a video with your phone)))

@AutoSensation

2 жыл бұрын

Difficult but can be done

I have wired the day running light the red wire to a switched live in the fusebox black earth to body and yellow to indicator live wire the indicator doesn't work when the day running light part is on but does with hazards or when I lock car any ideas why it doesn't indicate when the running light is on

@AutoSensation

3 жыл бұрын

They don't work simultaneously. It would be one or the other. When the daytime running lights are on the indicator will override the DRL. Then when indicator switches off a few seconds later the DRL will come back on.

@nickfoss545

3 жыл бұрын

Sounds like my problem. When my hazards are on they work fine as soon as I put the turn signal on they don’t work. I don’t get it

Can I get the power source from my headlight harness either low or high beam? Do I have to turn on the park lights to check the power source? Thanks.

@AutoSensation

2 жыл бұрын

Are you talking about the power source for the DRL? If so, your DRL will only turn on when your low or high beams are on. If you want to turn DRL on with park lights then yes you would have to turn on the check power source.

@pogisalahat

2 жыл бұрын

I have a separate harness for my low and high beam headlights (hrv) I tapped the low beam wire harness with my tester and the light came on with the car turned off. Can I use that as a power source? Thanks for your quick reply. Your videos are great and very helpful.

@AutoSensation

2 жыл бұрын

You want to make sure it also turns off at some point. Otherwise it will stay on all the time.

@pogisalahat

2 жыл бұрын

Thank you so much. 👍

@pogisalahat

2 жыл бұрын

I was able to tap on my factory drl harness positive wire with the pin needle. Thanks for your help. Now I’m doing the led bumper lights.

Did they work okay when you put the needles in back of the wiring harness? Nothing got damaged?

@AutoSensation

2 жыл бұрын

Works perfectly. I'm going to start wiring everything this way when possible.

I've got a weird issue and figured I might ask on here. I bought a set of these drl strips. when I wire into my MAJOR on my parking/turn signal plug my drl stays in turn signal mode no matter what I do. But once I unhook it it goes back to drl mode. The major is the one that controls my turn signal so I'm stumped. Any ideas?

@sanjibmallik9495

3 ай бұрын

Were you able to fix your issue? I am also facing the same issue in VW passat 2012. If Any one has installed it in VW please let me know how you fixed it @kodybell4616

What is the automotive wire used for ? Is it to extended the wires or what do you use for that?

@AutoSensation

3 жыл бұрын

Yes. To extend the wires. My turn signals are further down the bumper.

it work like that , onley if the car dont have Light Module

Did you put the positive and negative needles within the harness connection as well???

@AutoSensation

2 жыл бұрын

No. I just use the positive on the harness. The ground I found an unpainted bolt and connected to that.

how did you check the blinker

Nice setup....

@AutoSensation

Жыл бұрын

Thanks

Do they last?

@AutoSensation

Жыл бұрын

About two years now. I did transfer to a different vehicle. It still does work.

i need help with mine 2011 pilot tapped into the drl wires and they come on then go off

@Ghost_face_red

3 жыл бұрын

I'm thinking there isn't enough voltage to run both drl halogen and the leds going to try and get led drl lights and try again

How did you remove headlight harness so easily?

@AutoSensation

Жыл бұрын

Practice. I was difficult at first but I unplugged many times I just got used it. lol

Better access to the front turn signal is the "vent" under it, just pop off the small grill.

@AutoSensation

3 жыл бұрын

Good to know. I didn't know that.

Cool vids bro I saw your Seahawks shirt, what part of Washington are you from?

@AutoSensation

3 жыл бұрын

South Seattle. What part are you from?

@bigballs9769

3 жыл бұрын

@@AutoSensation up north close to Everett

@20tea

2 жыл бұрын

Goodbye Russell Wilson...

Hi how I can do that turn signal into day time runing lights

@Go2all

2 жыл бұрын

2017 chevrolet malibu

@AutoSensation

2 жыл бұрын

@@Go2all connect the red wire to any power source that turns on when the vehicle starts

Question, do your leds in strip facing down or up?

@AutoSensation

2 жыл бұрын

LEDs are facing down.

I install this in my car and for some reason kills my batty ,,, I never had a problem trying to turn on but after this I had the first

@AutoSensation

Жыл бұрын

Interesting. Does the lights stay on after you turn off the vehicle?

I was hoping you were gonna show the ENTIRE process...with how you did the tapping of the wires...

@AutoSensation

3 жыл бұрын

I'll do a little update on another vehicle sometime in the future. Same process. Subscribe to get notified.

@cgwjy122

3 жыл бұрын

I was hoping for the same thing

@Bamx333

3 жыл бұрын

@@AutoSensation yea i want to know how to wire them so they work with the turn signals

@AutoSensation

3 жыл бұрын

@@Bamx333 find the turn signal wire from your vehicle using a tester. Connect the yellow wire from your led strip to the turn signal of the car.

@Bamx333

3 жыл бұрын

@@AutoSensation thank you!! I’m super new to car work but I’ll try it!

Nice and good work 💪

@AutoSensation

2 жыл бұрын

Thanks.

I did install same as your video on my 2022 pilot and now the message “Headlights issue” on dashboard. How do we delete that message

@AutoSensation

2 жыл бұрын

Disconnect the battery for at least 60 seconds then reconnect.

@pickeyism

2 жыл бұрын

Thanks 🙏. The “Headlines issue” warning message disappeared for now after disconnected and reconnected battery > 60 seconds. Hope the car computer learned new amps for highlights and added on new LED DRL. I will update the results in couple days later to see wherever that message will not pop on or not.

@billyvision1360

2 жыл бұрын

Don’t void your warranty dude!

@AutoSensation

2 жыл бұрын

@@billyvision1360 I like to use pins behind the connectors or harness. That way if something happens in the future, I can easily remove without evidence of wire splice.

@jasonmbritt

6 ай бұрын

Add a resistor

Question? Did you connect the red wire to the low or high beam??? I have exactly the same set for a toyota sienna, my daytime running lights it looks is my high beam??? Is that correct??? Please advise, love your video thank you

@guardian860

2 жыл бұрын

DRL means Daytime Running Light = small lamp. It's not your Low beam neither high beam. Connect the red wire to the small lamp positive wire.

Where do you get good automotive wires to extend?

@AutoSensation

3 жыл бұрын

amzn.to/3uEiVUa these work great

@RC-rg3vz

3 жыл бұрын

@@AutoSensation awesome! What about the little needle pin like thing you used to tap into the rear of the headlight wires?

Do you have a link for these lights?

@AutoSensation

3 жыл бұрын

I got them from ebay. ebay.us/TIf5Kk

What year is this Honda Pilot?

@AutoSensation

3 жыл бұрын

2019

where do you get the little needle pin like thing you used to tap into the rear of the headlight wires?

@AutoSensation

3 жыл бұрын

I used these. amzn.to/3rmJk8e I did have to modify a little to make them smaller.

@jonmike316

9 ай бұрын

​@@AutoSensationdo you just have to insert behind the harness?

@AutoSensation

9 ай бұрын

@jonmike316 yes. I just pushed in until it makes contact with the wire

That nice

It's cool, but on street when I driving it's kinda annoying for me :/ I used to the the normal flashing ones :D

@AutoSensation

3 жыл бұрын

I can't see it while I'm driving but maybe annoying for others. It draws attention so they know I'm turning 😃🤷‍♂️

@ThePandaKingFTW

3 жыл бұрын

I was thinking of getting normal flashing ones. Where did you get yours?

@AutoSensation

3 жыл бұрын

@@ThePandaKingFTW got mine from eBay. ebay.us/TIf5Kk

What's the price of this unit pls

@AutoSensation

3 жыл бұрын

Around $21

What is their life span?

@AutoSensation

2 жыл бұрын

Not sure. Installed over a year ago and it still nice and bright. Not dead LEDs.

You need more LED's in your car LMFAO.

@AutoSensation

3 жыл бұрын

LMAO. Few more then I'll call it good. 🤣😉

You need to change the bottom turn signal light to led…there flashing at a slower rate

@AutoSensation

2 жыл бұрын

Led bulbs on order. We shall see if it matches up.

They die after 2 weeks. Bad quality

@AutoSensation

Жыл бұрын

Really two weeks! Maybe a bad batch. Get a refund or exchange. I had mine for about a year and a half and even transferred it to another vehicle. Still works.

@samelias8440

Жыл бұрын

Not sure maybe. I will give another try and see. This time I will record it.

@samelias8440

Жыл бұрын

I just checked the reviw on Amazon. It seems other people had the same experience 😕

More content here. bit.ly/3rmhnvL

Question can you connect the red wire to the rear power outlet fuse?

@AutoSensation

Жыл бұрын

Yes as long as the fuse will have no current when vehicle is off