How to Install Kooltherm K17 Insulated Plasterboard
This video explains the simple steps to install Kingspan's Kooltherm K17 Insulated Plasterboard.
Жүктеу.....
Пікірлер: 31
@springbok19603 жыл бұрын
Yet another useful, instructional video virtually destroyed by some dipstick that feels an irritating, interruptive 'musical' backing is needed.
@Roldhave3 жыл бұрын
Would it be possible with this video WITHOUT the music.?
@beachted Жыл бұрын
Great vid. Thanks.
@edt52764 жыл бұрын
Adding music over what we're trying to listen to is really annoying.
@tonyhowells56094 жыл бұрын
Can you use the finish or do you need to plaster this product when in situe
@nowthenad32865 ай бұрын
What *IS* suitable for a wall with moisture penetration?
@spkelly69905 жыл бұрын
Music interferes,
@youweiguo99395 жыл бұрын
How you guys gonna adjust the K17 if substrate was not plumb and level?
@KingspanInsAU
5 жыл бұрын
Hi Youwei, As technicalities are involved in applications, it would be best if you could email our technical team at technical.au@kingspan.com for a more customised response for your enquiry. Alternatively, you can provide your contact details, and someone will get in touch with you about it.
@dominicthorpe1 Жыл бұрын
Can I ask, does insulated plaster board need to be plastered over? Or can it just be painted over after the joints have been finished?
@adrianred236
Жыл бұрын
You can finish it the same as normal plaster board. Tape and joint only or just tape and joint. If tape and joint only you should seal it. I've used SBR diluted to 3:1 and just roll on before painting
@KingspanInsAU
Жыл бұрын
The Kooltherm K17 can be finished in the same manner as conventional plasterboard. This would typically include flushing over the joints and fixings, then painting directly to the plasterboard. You can get in touch with our Technical team at technical.au@kingspan.com for any further information.
@dominicthorpe1
Жыл бұрын
@@KingspanInsAU Thank you!
@dominicthorpe1 Жыл бұрын
Can plasterboard be attached to an existing painted plastered wall?
@KingspanInsAU
Жыл бұрын
Yes it can. You can download the Installation guide for all details: www.kingspan.com/content/dam/kingspan/kil/campaigns/australia/kingspan-kooltherm-residential-installation-guide-en-au.pdf
@neojted Жыл бұрын
Exactly what fixings do you use please?
@KingspanInsAU
Жыл бұрын
It would be best to get in touch with our technical team at technical.au@kingspan.com. Generally the following is used: • Bugle head or plasterboard screw • Nail in nylon anchor • Concrete screw anchor When fixing concrete, masonry or installing over existing linings, adhesive can be used as the primary fixing. Mechanical fixings can be used to hold the boards in position while the adhesive reaches its fully cured strength.
@minecraftlord5683 жыл бұрын
Lol music kills it
@I-am-not-a-number4 жыл бұрын
What happens if the wall gets damp? Does it all just fall off?
@KingspanInsAU
4 жыл бұрын
Hi Libertarian, We recommend the Kooltherm K17 only be installed against walls which are already externally waterproofed.
@MikeJones-vm2hn
4 жыл бұрын
If the substrate of your wall has dampness issues than the "installation method" of the plasterboard lining would be the least of your worries.
@I-am-not-a-number
4 жыл бұрын
Most lime mortar walls act like wicks and have some dampness
@mmanews82033 жыл бұрын
Try using a bigger straight edge muppets
@col89812 жыл бұрын
how many muppets does it take to fix a sheet of plaster board
@jtb1245
2 жыл бұрын
Get in there my son 😅
@leupenaelisaia28473 жыл бұрын
Your mechanical fixing is not 15 mm from edge lol
@mgomez8864 Жыл бұрын
I feel this video is not as well made . 1- No indication as how to prepare the walls before installation 2-… the music is so distracting too . Thank you looking forward for a edited and better video
@janedodd97532 жыл бұрын
Cut the music please.
@tianyinjia3 жыл бұрын
Bad production
@iainmacdonald59073 жыл бұрын
I hope your product is better than thus video production, absolute embarrassment for a professional company!
Пікірлер: 31
Yet another useful, instructional video virtually destroyed by some dipstick that feels an irritating, interruptive 'musical' backing is needed.
Would it be possible with this video WITHOUT the music.?
Great vid. Thanks.
Adding music over what we're trying to listen to is really annoying.
Can you use the finish or do you need to plaster this product when in situe
What *IS* suitable for a wall with moisture penetration?
Music interferes,
How you guys gonna adjust the K17 if substrate was not plumb and level?
@KingspanInsAU
5 жыл бұрын
Hi Youwei, As technicalities are involved in applications, it would be best if you could email our technical team at technical.au@kingspan.com for a more customised response for your enquiry. Alternatively, you can provide your contact details, and someone will get in touch with you about it.
Can I ask, does insulated plaster board need to be plastered over? Or can it just be painted over after the joints have been finished?
@adrianred236
Жыл бұрын
You can finish it the same as normal plaster board. Tape and joint only or just tape and joint. If tape and joint only you should seal it. I've used SBR diluted to 3:1 and just roll on before painting
@KingspanInsAU
Жыл бұрын
The Kooltherm K17 can be finished in the same manner as conventional plasterboard. This would typically include flushing over the joints and fixings, then painting directly to the plasterboard. You can get in touch with our Technical team at technical.au@kingspan.com for any further information.
@dominicthorpe1
Жыл бұрын
@@KingspanInsAU Thank you!
Can plasterboard be attached to an existing painted plastered wall?
@KingspanInsAU
Жыл бұрын
Yes it can. You can download the Installation guide for all details: www.kingspan.com/content/dam/kingspan/kil/campaigns/australia/kingspan-kooltherm-residential-installation-guide-en-au.pdf
Exactly what fixings do you use please?
@KingspanInsAU
Жыл бұрын
It would be best to get in touch with our technical team at technical.au@kingspan.com. Generally the following is used: • Bugle head or plasterboard screw • Nail in nylon anchor • Concrete screw anchor When fixing concrete, masonry or installing over existing linings, adhesive can be used as the primary fixing. Mechanical fixings can be used to hold the boards in position while the adhesive reaches its fully cured strength.
Lol music kills it
What happens if the wall gets damp? Does it all just fall off?
@KingspanInsAU
4 жыл бұрын
Hi Libertarian, We recommend the Kooltherm K17 only be installed against walls which are already externally waterproofed.
@MikeJones-vm2hn
4 жыл бұрын
If the substrate of your wall has dampness issues than the "installation method" of the plasterboard lining would be the least of your worries.
@I-am-not-a-number
4 жыл бұрын
Most lime mortar walls act like wicks and have some dampness
Try using a bigger straight edge muppets
how many muppets does it take to fix a sheet of plaster board
@jtb1245
2 жыл бұрын
Get in there my son 😅
Your mechanical fixing is not 15 mm from edge lol
I feel this video is not as well made . 1- No indication as how to prepare the walls before installation 2-… the music is so distracting too . Thank you looking forward for a edited and better video
Cut the music please.
Bad production
I hope your product is better than thus video production, absolute embarrassment for a professional company!