How to Install Glue Down Vinyl Plank
In this video you will get the idea how to install glue down vinyl plank. This vinyl is great for concrete floors as they are usually not perfectly leveled but you can install it on wood subfloors as well.
#vinylplank #vinylplankflooring #flooring #flooringinstallation #vinylfloor
Disclaimer:
Videos produced by this channel The Handy Neighbor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The Handy Neighbor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and The Handy Neighbor, this channel and content creators here, cannot be held liable if they cause any damage to their homes. The Handy Neighbor cannot claim liability with all applicable laws, rules, codes and regulations for a project. By clicking and/or viewing this video you accept these conditions
Пікірлер: 205
Amazing instructions ! Right into it with details, product and tool specs. How and why explained, no useless intros, music and unneeded talking. Thank you
@TheHandyNeighbor
9 ай бұрын
Thanks for the feedback!! Please like and subscribe!
Absolutely superb instructions. No BS loud music or unnecessary commentary and messing around. Top man, thank you.
Very professional and wonderfully clear. Thank you.
@TheHandyNeighbor
5 күн бұрын
Thank you! Please like and subscribe!
I’ve watched a ton of flooring videos and this one by far is the best quick and to the point! Thank you!
@TheHandyNeighbor
4 ай бұрын
Thanks a lot 🙏 Please like and subscribe!
best flooring video we've seen! THANK YOU!
@TheHandyNeighbor
3 ай бұрын
Thanks a lot! Please like and subscribe!
Excellent information and instructions! Thank you very much!
I needed this ..I'm going to be doing this real soon . You are very good with explaining .. I now have an understanding .
@TheHandyNeighbor
Жыл бұрын
Thank you for the feedback!
Nice job! Very well done! Thanks!
Thank you ! I would like to give you a few thumbs up. Very professional and super helpful.
@TheHandyNeighbor
8 ай бұрын
Thank you. Please like and subscribe!
Very useful! Thanks!
I've got a project to do tomorrow and this was very helpful. Now I'm going to make that quick $400 easier. It's simple!
@TheHandyNeighbor
11 ай бұрын
Good luck!
Hey thanks for the info great explaining
Great Job!👍
Nicely done! Thank you.
@TheHandyNeighbor
13 күн бұрын
Thank you for tge feedback! Please like and subscribe!
Great job on the video. Very helpful
@TheHandyNeighbor
Жыл бұрын
Please like and subscribe! Thanks!
Very nice instructions. Thank you.
@TheHandyNeighbor
4 ай бұрын
Thank you, please like and subacribe!
Great video! Thank you.
@TheHandyNeighbor
8 ай бұрын
Thanks, please like and subscribe
Great video
Solid video. Thank you!
@TheHandyNeighbor
13 күн бұрын
You're welcome!
Great video! Thanks..
Great vid , after seeing this I’m gonna give it a try , thanx !
@TheHandyNeighbor
2 ай бұрын
Thank you! Please like and subscribe!
Nice job man
Can you do a follow up video showing transition to carpet and/or other tile flooring? Also how transitions to carpet on stairs. Thanks!
Very nice video, thank you.
@TheHandyNeighbor
Жыл бұрын
Thank you for the feedback!
Very informative and concise...great job!
@TheHandyNeighbor
Жыл бұрын
Thank you for your feedback, it means a lot!
Awesome…I’m a lady in my late 50’s and I think I can handle this job! Thank you for sharing!
@TheHandyNeighbor
4 ай бұрын
Go ahead, for sure you can! Let me know if you have any questions.
@TheHandyNeighbor
4 ай бұрын
Please like and subscribe! Thanks!
@jc1400
6 күн бұрын
I’m a 61 yr old lady and I’m finishing my second room along with the hall way. It’s easy. I can’t do an entire room in one day, this lets me work in smaller sections. I lay out and pre cut a section, then glue. The next day a precut and fit the next 6-8 rows, and the following day I glue down. Working just an hour or so a day I just did an entire room this week. I’m getting ready to put down the moulding to cover the gap and I’m done.
@TheHandyNeighbor
6 күн бұрын
Go go lady.
Great video to learn from strat to the point and very clear directions thanks for sharing and great work on the job and video😊 godbless
@TheHandyNeighbor
4 ай бұрын
Thanks! Please like and subscribe!
Nice job!!! Nice explication!! Thanks for share knowledge
@TheHandyNeighbor
Жыл бұрын
Thank you as well! Please like and subscribe!
Excellent! Exactly what I needed. Great communication and very good camera work.
@TheHandyNeighbor
Жыл бұрын
Thank you. Please like and subscribe! Thanks
great video.
@TheHandyNeighbor
4 ай бұрын
Thanks👍 Please like and subscribe!
Thank you
@TheHandyNeighbor
9 ай бұрын
Please like and Subscribe!
Divno👍
Thanks god bless
@TheHandyNeighbor
3 ай бұрын
Thank you. Pleaselike and subscribe!
I'm surprised you didn't show making the end seams of each plank offset.
@TheHandyNeighbor
3 күн бұрын
It is hard to record every single thing while trying to get the job done in clients home. That is why.
Great video. I am going to install over concrete 5mm, loose lay vinyl flooring. Manufacturer also suggests double sided tape. Your toughts?
@TheHandyNeighbor
Жыл бұрын
I am not sure where they want you to put double sided tape, but I don’t think it will work for concrete. Glue on bare concrete will be more than enough to hold this floor in place. I am still very happy with all my installs.
Great video. I'm wanting to do the same. Glue down Vinyl in my basement directly on concrete. What's the disadvantage of doing so without a subfloor? Thanks!
@TheHandyNeighbor
Жыл бұрын
Nothing much, they say it might make it warmer on your feet and that is it. On the other hand id you get the flood or sewage backup it will all go under the subfloor and wood will absorb the water and swell. Here when you apply the glue on concrete and install plank over it you just have to mop it and that is it, no water will come under the plank as you do not leave any space under the plank. Good luck!
Super easy, thanks for the info mate. Question: how long it took you to cover this hall area, including the 30min time for the glue to get sticky?
@TheHandyNeighbor
4 ай бұрын
Hard to tell now for sure you will need some time to prep everything and make a first setup. You should be done before lunch with a setup of first couple of rows. It took me two days for entire basement. Please like and subscribe! Thanks!
can you share the plank info and link
I wish you would have shown how to finish and measure the last thin part near the doorway.
@TheHandyNeighbor
Жыл бұрын
I know what you mean. Thank you for the feedback!
Great tutorial do you recommend uzin ke 2000s
@TheHandyNeighbor
Жыл бұрын
It is presssures sensitive so same thing, why not! I would try!
Great video can this be installed over a painted concrete floor
@TheHandyNeighbor
9 ай бұрын
I would say so, If paint is not pealing of badly than yes. Thanks Please like and subscribe.
Thank you. Can you describe your process for laying glue down LVP over OSB?
@TheHandyNeighbor
29 күн бұрын
Same way 100% nothing different.
@l10ydchristmas
29 күн бұрын
Thank you. No priming or anything? Some are saying you need to put down 1/8" plywood or self leveling concrete first.
Nice video! I'm a handyman but first time doing this. However, the owner had to pull up the existing vinyl plank floor and there is glue residue. If I'm going to reinstall new planks over the existing glue which is tacky, what would you recommend? Scrape as much glue off as possible then apply more glue over the top?
@TheHandyNeighbor
8 ай бұрын
You can place a few planks over it, and try to move it with your foot. If it is not moving and plank sits locked than you can still use it, save lots of time. Or maybe add some more glue where needed, thin layer. Please like and subscribe. Thanks
great video ..... question though does it matter weather or not the basement slab has a vapor barrier under it ? because most homes do not have that like mine that was built in 1952
@TheHandyNeighbor
8 ай бұрын
Good quiestion. Not sure how much moistrure is in your slab and how high might me moistrure transfer but I install this floor in 1962 home of my brother in law and he never had a problem with it or with moisture so far. I would do it. Please like and subscribe!
Like LIke!
I have a manufactured home and underneath the carpet is wood. can I apply this to wood and it stick.
@TheHandyNeighbor
Жыл бұрын
It should work yes, use any “pressure sensitive” glue. Many flooring stores will be able to sell you this kind of vinyl tile glue. I installed some on OSB subfloor and worked great. Dry time is shorter than on concrete because wood is porous. Try it on one piece to see how it looks.
Great job! Is there an underlay available for this flooring to make it a bit warmer on a concrete floor? (It’s for a living room in Scotland 🏴 🥶)
@TheHandyNeighbor
7 ай бұрын
Thanks. I don’t think there any underlayment for the concrete floors. Carpet over once you are done 😀 Thanks Please like and subscribe
@mcalpine663
7 ай бұрын
@@TheHandyNeighbor haha thanks I’ll have to buy a rug now lol
I had house replumed and they ripped out floor in bathroom. I had glue down tile all over house. I just have to repair the area they ripped out. Do I have to wait for concrete to set before applying this adhesive and installing the tile where they ripped it out?
@TheHandyNeighbor
7 ай бұрын
Well it needs to be dry and solid. Like wait for couple of says at least. Please like and subacribe. Thanks!
So it's better to install the soft planks with glue? Is there any need to use glue with click-lock LVP? Especially in commercial settings ...
@TheHandyNeighbor
3 ай бұрын
On concrete that is not 100% leveled yes it is better. In most of commercial places you will find this kind of flooring not click vinyl. Please like and subscribe! Thanks!
Im going to put this on concrete which had carpet glued down to it. Does the floor need to be completely clean of all the old glue?
@TheHandyNeighbor
9 ай бұрын
Great idea. It will work well. Please like and subscribe! Thanks!
good job sir, do i need to use a roller after vynil is set, i cant find one anywhere here in Mexico?
@TheHandyNeighbor
Жыл бұрын
No just walk on it. I never use roller.
@faustino5916
Жыл бұрын
@@TheHandyNeighbor Awesome✌️
How long would you say an area like you just did would take to install? a couple hours including drying time of glue?
@TheHandyNeighbor
9 ай бұрын
Give it a full day for sure just to be safe. Please like and subscribe! Thanks
5:40 nice new hole in the plank below lmao
@TheHandyNeighbor
3 ай бұрын
What do you mean?
@Mr_RPE
3 ай бұрын
@@TheHandyNeighbor your blade hit the plank that is laid on the floor, when you cut the one from above
@TheHandyNeighbor
3 ай бұрын
Yes you are right. That is the part where we have to careful. Thanks
can this be installed over kitchen tile that might be uneven in some areas
@TheHandyNeighbor
10 ай бұрын
Not sure never teied, glue will god I am pretty sure, the only thing is filling the gap between the tiles/grout lines. Give it a try with one piece. Please like and subscribe!
👌
Very thanks! I will have a project lvp glue down in Chicago, commercial labor. I give them 2.75$ a sqft labor cost, how much u charge? Thanks
@TheHandyNeighbor
Жыл бұрын
It is a lot cheaper in Canada, it goes around 1.50$ sqft for labour. 2.75$ for sure, why not,give it a try, they pay for your skills 👍
Can you pour thin set first to make it nice and even ?
@TheHandyNeighbor
Жыл бұрын
Yes you can for sure. But if you don’t want to you don’t have to for this floor. This is like a rubber and will follow every curve. For vinyl click it is highly recommended to level it first.
Since this is glued directly onto concrete, how difficult would it be to take it up and replace the entire floor? I assume you'd have to scrape all of the old glue off?
@TheHandyNeighbor
Жыл бұрын
Well it would take some effort for sure. You don’t have to scrape off the gloor, just place click vinyl or laminate over it. No problem.
You could have used pressure sensitive spray adhesive
Could you tell me if it's worth using waterproofing membrane such as dunlop damp proof waterproofing product on concrete slab? Before gluing down vinyl planks.
@TheHandyNeighbor
7 ай бұрын
You can give it a try. Glue will stick to it after membrane is dry. Glue and vinyl plank is membrane on by itself in some sort of way. Not sure how much moisture you get in your floors, mine are dry but pretty cold. If concrete is not wet just keep it simple. Please like and subscribe. Thanks!
@simsim5919
7 ай бұрын
@@TheHandyNeighbor thankyou,
Hey my friend i finished one room, do you recommend coating vinyl tile with polyurethane for protection?
@TheHandyNeighbor
Жыл бұрын
Not sure, I never tried that.
@faustino5916
Жыл бұрын
@@TheHandyNeighbor i seen a video about that, i ll look more into it👍
What do you put incase there are gaps on the floor?
@TheHandyNeighbor
Жыл бұрын
Not sure how deep is the gap. Probably nothing if you can lay the plank over it. Take a look of my other video, I had a big gap here on my project. kzread.info/dash/bejne/e6SYpbeskdSnfLg.html
How do you apply glue under the door jamb?
@TheHandyNeighbor
Жыл бұрын
No need, just spread it all around the jamb and once you set the plank and slide under the jamb it will not move.
Do you leave an expansion gap around perimeter
@TheHandyNeighbor
Жыл бұрын
Expansion is minimal, 1 milimeter maybe. So you leave 1/8 or 1/4 of an inch max.
What is the brand of LVP used in this video?
@TheHandyNeighbor
Ай бұрын
Uf.. I am not sure bud. Sorry was a while ago.
Do you use any sort of vapor barrier before applying the glue?
@TheHandyNeighbor
10 ай бұрын
No no 100% not, glue on bare concrete. Please like and subscribe! Thanks
With the advent of Lvp and modern laminates I don’t understand the reasoning for using glue down flooring. Is it a price point?
@TheHandyNeighbor
Жыл бұрын
Mostly you want to use glue down flooring on basement concrete floors as they are usually not leveled at all, and with LVP or laminate you can get many soft spots as there is some wiggle room everywhere what can cause click flooring locks to disengage and get loose after few years. As well another adventage of glue down is if you get a flood in the basement you can just mop it and done, while in the case of LVP water can go under the flooring so you might have to remove to dry the floor.
@KC-rk1hx
Жыл бұрын
@@TheHandyNeighbor good point on the flooding aspect. I know for a fact glue down plank is cheaper then ceramic tile if you have to pay somebody to install it. In my area glue down anything has been dead since the 90’s.
Do you leave any space between each plank for possible expansion so it doesn’t buckle?
@TheHandyNeighbor
7 ай бұрын
No, let them sit in the warm house for a couple of days before tou install them so they naturaly relax in the warm house. Install them like that tight to each other. If they shrink im the winter time it will be minor and you home is always warm anyway. Please like and subscribe!
@jennaleighcouch1990
7 ай бұрын
@@TheHandyNeighbor thank you! That is what an installer wanted to do and then put a clear coating over the floor including gaps and thought that sounded off. Appreciate it!
Very nice job! If one of the tiles gets damaged later, can the damaged tile be removed by a heat gun? I know peel and stick can but will this type of glue soften with heat? Liked/Subbed.
@TheHandyNeighbor
Ай бұрын
It will stay partially sticky so if that ever happens just remove the plank and insert a new one over. Please like and subscribe! Thanks
@Jack-gu7rr
Ай бұрын
@@TheHandyNeighbor Thanks!
Once you put the glue down are you standing on the tacky glue floor as laying plank?
@TheHandyNeighbor
Жыл бұрын
No, I walk/stand on vinyl plank that I installed right before that. Please like and subscribe! Thanks!
I've heard others say that you have use a roller afterward. Is that not required?
@TheHandyNeighbor
Жыл бұрын
Just walk all over it, you might have over 170 lbs that is more than enough. You will save to money not renting roller and effect is the 100% the same.
@gfield56
Жыл бұрын
@@TheHandyNeighbor Thanks, that's good to know. I appreciate the great instructions overall.
@faustino5916
Жыл бұрын
@@TheHandyNeighbor got it Thanks!!!
can you send the link of the laser you using for the straight line
@TheHandyNeighbor
11 ай бұрын
www.amazon.com/Huepar-Green-Laser-Level-Self-Leveling/dp/B073VJPM4Z/ref=mp_s_a_1_18?crid=27JBAIDOUF5HJ&keywords=huepar+laser+level&qid=1693971035&sprefix=huepar%2Caps%2C149&sr=8-18
@TheHandyNeighbor
11 ай бұрын
Please like and subscribe! Thanks
From where I should by the planks
@TheHandyNeighbor
Жыл бұрын
Ask in any local flooring store as I found that Home Depot does not sell 5 mil planks.
Can you give the name of the glue u used please thanks
@TheHandyNeighbor
Жыл бұрын
Watch the video, it is part of it what type of glue I used and where to buy. Robers 2330 Please like and subscribe!
Will there be gaps over time like I see in other videos?
@TheHandyNeighbor
4 ай бұрын
No, did now happen to me even once. I heard about it but in my case it is not noticable at all as it is less then 1 mm. I did several of these with the same floor and I had this floor in my business (different brand of the glue down plank) and in all these cases I did not have this problem like some are saying.
@TheHandyNeighbor
4 ай бұрын
Please like and subscribe! Thanks!
Since this is concrete, did you use primer?
@TheHandyNeighbor
Жыл бұрын
No no primer needed at all. Just scrape off any mud, dirt or stuff like that with mudding knife or spatula and that is it. Vacuum the floor. Glue is very sticky, you can use anywhere, concrete or wood subfloor.
What is the longevity for something like this.
@TheHandyNeighbor
11 ай бұрын
Forever practicaly, based on product quality. All daycares and commercial places have this, so it does take a lots of traffic.
Can you apply the glue over old glue down vinyl?
@TheHandyNeighbor
11 ай бұрын
You might be able to place a plank right in to the old glue as it might be active still. If not yea you can, just don’t go to tick! Please like and subscribe! Thanks
@kevinorozco7774
11 ай бұрын
@@TheHandyNeighbor Thank you sir! Its old glued down vinyl from the 90s/early 2000s. Trying to see if its worth leaving it or removing it before installing the new glue down vinyl planks. Subscribed 👍
did you prime the concrete?
@TheHandyNeighbor
2 ай бұрын
No I did not. I used flooring glue only. It is still perfect few years after it will not go anywhere. Please like and subscribe! Thanks
Is the plank toxic of it is the glue?
@TheHandyNeighbor
Жыл бұрын
It is not toxic as far as I know.
So where you start and glue down the first 2 planks. Then when you start the rest won't the glue on first part be dry when you start the rest? How do you ensure it won't cause a seam to appear between first 2 planks and the rest?
@jasonbechtel9796
2 ай бұрын
Im doing a huge room and also wondering if I can do half one day and half the next? Where on stops and you begin the rest the next day how do you do it?
@TheHandyNeighbor
2 ай бұрын
Yes you can. Don’t go to far with the glue in that case. Lay one row of planks far as you want, mark it where it ends and apply the glue only up to that sport where your plank will and or one inch over.
@TheHandyNeighbor
2 ай бұрын
I like to start in the hallway in the middle of the space but make you you pre-lay few planks to se where it ends.
@TheHandyNeighbor
2 ай бұрын
If the glue is dry it will be sticky for a long time so you will be ok.
@jasonbechtel9796
2 ай бұрын
Thank you so much!
Do you not use a weighted roller?
@TheHandyNeighbor
5 ай бұрын
You totally don’t have to. You can walk all over it once ypu are done with each section. Bang every plank with the palm of your hand or fist after you glue it down and walk over it later. Or rent a roller from home depot but it is not cheap. Please like and subscribe! Thanks!
@iwant2chgmyworldi863
5 ай бұрын
@@TheHandyNeighbor Ok thanks, saves me renting one.👍
What can be done if this starts to unglue itself
@TheHandyNeighbor
Жыл бұрын
It should not unglue if proper glue was used as that glue is very sticky. But, If that happened for any reason, remove or lift the plank, take flat spatula and try to scrape it off as much as you can and apply new vinyl plank/ vinyl tile glue.
@donpoole2033
11 ай бұрын
Use a 100 lb roller on initial install!! If unglues lift and install more gle and let tack up then reinstall
How long do you have before the glue is no longer tacky? Do you have to do it all like in a hour?
@TheHandyNeighbor
Ай бұрын
More than that, it does not dry 100% don’t worry you have plenty of time. Please like and subscribe! Thanks!
@nimster64
Ай бұрын
@@TheHandyNeighbor thank you for the reply I just subscribed another question what adhesive should I use when using 1/4 underlayment plywood?
@TheHandyNeighbor
Ай бұрын
@@nimster64 you can still use the same glue. This thing is sticky as hell. Thanks! I would go directly on concrete with vinyl I would not add any underlayment.
@nimster64
Ай бұрын
@@TheHandyNeighbor thank you the subfloor is 3/4 plywood. And ontop of the 3/4 I was going to add the 1/4” plywood underlayment. I don’t have concrete. It is a raised sunroom in Chicago
@TheHandyNeighbor
Ай бұрын
Sure no problem, this glue will work, CUSTOM has a good flooring glue as well that is very sticky too.
What product to clean it?
@TheHandyNeighbor
4 ай бұрын
Uf.. this glue is not easy to clean. Can you scrape it off?
@andretigiovaneti7587
4 ай бұрын
@@TheHandyNeighbor I mean to clean the floors? Any special products?
@TheHandyNeighbor
4 ай бұрын
No just water or water soap or mr clean. Any floor cleaner
How are they holding up?
@TheHandyNeighbor
11 ай бұрын
Very good, It was basement and hold up very very good!
@map1313
10 ай бұрын
@@TheHandyNeighbor can you send me the link for the product or it’s name?
@TheHandyNeighbor
10 ай бұрын
It was local small supplier, Probably from China but it was good floor. I do not have the box anymore. I paid 2.20$ CAD per square foot 5 mm tick.
How long did this take you?
@TheHandyNeighbor
Жыл бұрын
2 days for 600 sqft basement. It takes some time to setup first run straight, after that it goes much faster.
@lescj200
Жыл бұрын
@@TheHandyNeighbor thank you! I’m bidding a basement remodel for a client and have never installed vinyl flooring before. Thanks for the info! Also, have you noticed anything peeling up or coming loose overtime? I’ve seen glue-down vinyl installed in a commercial space before and planks started peeling up after a month…
Don’t waste your time with a tape stack one on top of plank on ground use a second one to the wall to get the length mark it cut it.
water resistant?
@mariannatheron7363
Жыл бұрын
🙏🙏
@TheHandyNeighbor
Жыл бұрын
Yes 100%
You can walk on the glue after 30mins
@TheHandyNeighbor
Жыл бұрын
Do not walk on the glue. Walk in the floor after laydown the planks. Please like and subscribe! Thanks
I read *PRANK* 😂
That floors rough as hell! Should of at least been feathered and sanded minimum.
@TheJefferyJamesShow
11 ай бұрын
Critical people are everywhere, searching for what's wrong. 😂
Don't do this , that floor needs to be screeded 1st ???
@TheHandyNeighbor
Жыл бұрын
Not necessary. You can if you want to but not necessary. I did it like this many times and got perfect result every time. This is not regular vinyl, it is soft and will follow the floor.