How to install fibre cement board to a stud wall
Тәжірибелік нұсқаулар және стиль
The follow up video to How to build a stud wall to close a garage. this video takes you from when the stud wall has been built to it being full closed with 6mm fibre cement sheeting. A quick video showing the installation method and finished product. you will find it helpful to decide your cladding of choice.
24:3 building 0415119313
Пікірлер: 30
Perfect how to ..just what I needed. Thankyou
Nice video bro .Great work ,example on point . Job well done mate👍💯💯💯😎
Great video!
Awesome how to mate, subbed with thanks 👍
Love the channel. When painting the fibre cement sheets, do you need to prime first or is primer not needed?
@dennisperrie
Жыл бұрын
I didn't primer these as it was a cheap close in for the lady however, I am not a painter. I would check. Primer certainly would make the job better.
Love it, Will do for the storage but can only fit 4.5mm. Do you thing it will be strong enough? Thanks
@dennisperrie
10 ай бұрын
Yes but I would put the studs a bit closer together. Maybe 400mm apart so it doesn't have to span to far.
thanks boss
Thank you. That was just what I wanted to see. We are doing the exact same thing. So I guess you didn't use any flashing on the bottom?
@dennisperrie
Жыл бұрын
No it was more for security. It also not weather side and the water runs away.
I get that it's for a garage and it doesnt look like its weather facing, but is there really no need for a full install? and by that i mean adding sheathing and a vapor barrier
@dennisperrie
6 ай бұрын
It was more about security for the lady. originally, she had a tarp there with a door and she just wanted it secure and neat. I hear what you are saying but, in this case, it wasn't necessary.
That is perfect, may I know the thickness of the board? Thanks much😊
@dennisperrie
7 ай бұрын
The board is 6mm
@MA-rq6ye
6 ай бұрын
Thanks much
Hey Mate, Do you need to install Sarking / Isolation Paper on the timber wall? and do i also need to have a cavity in between my stud wall and Cement sheet for moisture? cant seem to find the answer if i need both or none. Thank you
@dennisperrie
2 ай бұрын
sarking is a good idea. I didn't because it is a simple close for a garage. a cavity would be for a wall that would be an exterior wall on a habital building. mine was not a cavity because carports are not considered habital
@janelleg191
Ай бұрын
@@dennisperrie thank you for that =D
What was the product you used to pre-glue the board?
@dennisperrie
10 ай бұрын
6m. Hardiflex sheets. 1200 wide at 2.4 long. I simply used liquid nails.
@simonlamoureux6726
10 ай бұрын
@@dennisperrie Thanks man
How do you remove a fibro sheet on both the exterior and interior of a house ( some might have asbestos), and some don't. Then replace it with a new sheet of non asbestos fibro sheet. Someone told me to use a hole puncher to remove the old sheet.
@dennisperrie
3 ай бұрын
well.if it is asbestos you need to use the proper personal protective gear.
@user-du8yc2zw2q
3 ай бұрын
@dennisperrie I certainly will, but can Fibro cement sheeting be removed but using a hole puncher?
@dennisperrie
3 ай бұрын
@@user-du8yc2zw2q I have never seen it.
had to spend 5mins grinding the edges of each board to get the joiner to fit clearly wrong ones
@dennisperrie
10 ай бұрын
Had to cut the sheets so they landed on the studs when you screw them and to make it fit neatly to the pillar which wasn't level. The joiners were the right size and just fit over the edge. They were the correct ones for 6mm boards.
@user-gy9zw4tu2n
10 ай бұрын
@@dennisperrie there was supposed to be an I at the start of my sentence i did that
@dennisperrie
10 ай бұрын
yeah, I was a little confused. you got the rebate ones , they can be flushed for seamless joints.@@user-gy9zw4tu2n