I have come around an issue after installing the kit. I can’t do autosprint anymore it seems like the left joystick never hits the outer threshold so i am always walking. Another issue is when I press K1 the light doesn’t flicker when testing even though it can be mapped. On the contrary k4 doesn’t want to be mapped. Please help me ! Update: So as I guessed, the left stick wasn't going to the max because when I put the board back it wasn't completely aligned. At first I thought it was because of the EVA tape, so I removed it and I put the rise circuit directly on the FPC (fixed it on the two pins). This still didn't fix my issue, so I ended up putting Eva tape on the inside of the back cover of the controller to put enough pressure on the board to be completely aligned. And now it works perfectly (the small issue I had with K4 is now fixed as well). I hope this will be helpful to someone out there :)

@milanw_

Жыл бұрын

Had the exact same problem with the left analog stick and also noticed that my screenshot button didn't "click" anymore. As you said there wasn't enough pressure coming from the left side of the motherboard inside due to the tape added at 10:20. Your solution worked perfectly, so thanks for sharing. I spared the part where the main orange ribbon cable lies on the battery to not put any more pressure on it.

@mac2515

Жыл бұрын

Does the kit comes with that EVA tape? as I've ordered it and am a bit worried now

@kiliancinematic496

8 ай бұрын

In case someone still needs help: Put the spare EVA Tapes and the one from your old backcase on the battery before you close the controller again, on the side where the new orange ribbon cable lies.

@maximilian9915

7 ай бұрын

​@@kiliancinematic496 on the Orange Cable ?

@maximilian9915

7 ай бұрын

​@@kiliancinematic496 Or only on the bettery?

I love the fact that Craig started to work on official ExtremeRate channel. Great work man! 🙌

thanks craig really nice to see more commentary from you 🥰

I installed and connected the L3 R3 cable and it works perfectly, thank you.

@Ajattaro

7 ай бұрын

That's great! Where in the video is the tutorial for that? I have missed it somehow lol. You need to sodder it, but did you use any flux with the soddering tin? I guess it's not necessary for that small drop?

Followed the tutorial to a T and it worked like a charm! Amazing tutorial!

Highly recommended!!! Thanks to the installation video it was pretty easy and it works more than perfectly. Just love it! Have had it for a couple years for the PS4 controller, once used it's a must-have and this one is even better😍.

Like the play-by-play instruction of the teardown and fix up back together again.

@ExtremeRate

Жыл бұрын

Yeah bro 😄

Great video, it works well! Thank You!

Can de BDM-030 be install just like the 020 and 010 version without soldering?Cause I'm just wondering why every KZread video include the soldering part for the 030 version.

Videos are so helpful everytime! Will always come to Craig for my remapping needs!

Thank you btw it was very helpful.

@ExtremeRate

Жыл бұрын

Glad it helped!

Thanks mate

Is there a video showing the rise kit and clicky trigger install together?

Yes! I've been waiting for this video since Sony decided to send me all three bdm 030

@CraigsChannel

Жыл бұрын

3! I can't even find one 😄

k3/4 and the remap button are not staying in place when I wanna attach it to the controller.... they just keep falling out, any ideas how to fix it? slowly getting frustrated

thank you

Hi, my controller is no longer turning on after adding the L3/R3 cable. It was working fine before with just the back buttons

Great video, thank you! Let me post my feedback here. 1, I spent a good 10 minutes to put back the touchpad in its place. There is a small plastic hook I broke down intentionally, so It went back together easily. 2, The L3 & R3 FPC cable strip could have larger holes so it would be easier to solder onto the PCB. 3, When I placed the small sticky pad under the original FPC cable, it was impossible to put back the FPC cable to its plastic pins, so I skipped that. 4, The FPC cable that came with the kit hadn't the smaller sticky tape on it, so I place that too onto the plastic pins instead. Other than these, everything was fine and it works perfectly!

Thanks for offering this video! Was there a section for connecting the stick for remapping? I somehow must have missed it

All my lights flash correctly and the correct amount of times when entering settings mode and mapping mode and after map them but once I test it, none of the paddles or buttons are responsive after many times of mapping them, don't get why since I have no flashing light when I press k1 and setting, please help I'm lost

BDM-30 Rise install not working Hi, I am hoping some kind sould would be able to help me. I have installed the hair micro switch clicky triggers which works fine. However, today I have gone to install the Rise4 kit and ensure everything ia lined up and installed correctly but the front buttons no longer work on the controller and when I go to turn ps5 off the controller just turns it back on again. Any help please?

So i did the install and everything correctly and remap the buttons it flashes like its remapped but when i click the buttons they dont do anything 😢

Hello, I need help, I cut the wrong part in my quite and I would like a new piece for bdm 40 please (i am french)

Enjoy to those with the bdm-30! One of my favorite mods

@ExtremeRate

Жыл бұрын

Glad that you like it bro!

@dmitrititov9614

Жыл бұрын

​​@@ExtremeRate Hi, i lost my eva tape that comes with the kit but i can buy that from the local shop , so what thickness of it size etc ? Thanks

@rwezy6674

Жыл бұрын

I only want my my 0 X my square and triangle what do I have to do then and also my 0x square and triangle won't work

As always, if you're needing a helping hand I'm always here 😁

@ExtremeRate

Жыл бұрын

Craig is here!!

@exmann03

Жыл бұрын

Hey @Craig’s Channel, appreciate the help, thank you. I’m about to order the BDM-030 kit and was wondering what was different about installing the 030 vs the 010/020? Any help would be greatly appreciated and thanks!

@CraigsChannel

Жыл бұрын

@@exmann03 with the newer version you don't have to remove the ribbon cables on the side, makes things a lot easier as loads of people on my channel where fitting the ribbons wrong. Have you got a 030 controller? Make sure to check you've got that model first in case you have a 020 👍

@exmann03

Жыл бұрын

@@CraigsChannel thanks for replying so quickly. Yes, it’s the 030 I opened it up already.

@CraigsChannel

Жыл бұрын

@@exmann03 you can check by the R2 and L2, probably the easiest way in future saves you opening it up 😄 Hope you have fun with the install and enjoy the kit 😎

The tutorial was perfect! Everything works like a charm. However, the start and share buttons are now a bit "sunken" into the controller. Are there any tips to fix this? Anybody else has experienced this?

I need help, my controller no longer turns on, it only shows a yellow light when I connect it with a cable and it doesn't have the adhesive tape either

@christiand.5912

4 ай бұрын

Did you get it to work?

@jimmiengel7236

4 ай бұрын

Same bro

@icednova4086

4 ай бұрын

@@christiand.5912 yes i didt i rot in ther discord

So if we don't want to solder do we still have to put in the cable around 7:50?

Hello, Great video by the way! Is it possible to charge them using the official playstation charging station with these remapped controllers?

the little orange thing that i stick to the board diddnt have sticky tape on it so i cant stick it to the board what do i do?

Is it possible to pair this remap kit with the LED button kit? I already have the LEDS installed in my controller and I noticed the ribbon cable for this kit needed to be installed in the same spot

my cable doesn't align with the holes you can see at 12:10. Additionally I don't have a tesa-strip - how connect this cable now?

So do you not need to replace ribbon cables for the new versions of the controllers anymore?

Installation was straight forward, thanks to this guide. The only thing is that the K1 press is way looser/easier than K2. Any solution for this?

My FPC ribbon isn’t going inside of the back mother board all the way . Also one of the 2 little holes are torn on the FPC ribbon . Do I have to replace it ?

was almost complete but we didn't receive eva tape in the box we looked if we miss placed it but we didnt find anything and we dont recal putting the tape somewhere what do we do.

You need to make another video completely ignoring the soldering parts. Please.

@mrmufasa3342

Жыл бұрын

I agree 100%

@NotTooTypical

Жыл бұрын

Just skip them like it shows in the video. It’s pretty easy.

@Skankhunt556

Жыл бұрын

@@NotTooTypical that’s not how my brain works 🫠 I really need a separate video

@schooldeskgum

Жыл бұрын

@@NotTooTypical it was a lot easier to follow along when I got my kit tho 👍🏼

@Dropshot_420

Жыл бұрын

I was so confused at first too

you think i could put the metal big paddles with the plastic small paddles? i imagine they would be more durable but the controller would weigh less than having it all metal. im also curious if they’re even interchangeable? thank you

Hi, I just installed and everything works fine, but I couldn’t bind X button to any paddles, what should I do?

@CraigsChannel would it better to install the rise4 kit first or the micro switch clicky trigger kit?

Why do i have to install the Eva tape? Cause at the Rise 4 kit for BDM 020 there was no eva and the Flex cable was connected right to the original connector not fixed at the plate. And is the eva tape part of the kit? Cause i need 2 new Contollers and want to install the Rise 4 kit on both!

if i only want x,o,square and triangle on my paddles whats the part i have to start watch im so confused?

Hello, is there a way to make a video just for those of us that want the back buttons for "x and o" ? Theres so many steps to skip that I'm getting really confused and hesitant to purchase this. Thank you.

I am going to install this kit together with the clicky triggers, is there anything i need to pay attention to?

Are you working on any mods or different colored shells for the dual sense edge?

@ExtremeRate

Жыл бұрын

Yes!

Two kits in a row seem to have warped back shells, really annoying to get to the last step and then have to take apart the rise kit again and put it onto the backshell I had from a previous kit that worked :/

Hey! Everything worked out except of the „right arrow“ button. Can you help me? 😢

Can you make a video remapping X, O and the left and right dpad buttons, I don’t know where they are on my motherboard and I’m confused as

The touchpad looks different in my version of the BDM030. Can’t figure out what is the soldering point.

Do you guys make this product for model bdm-10

Which parts do I skip if I only want my X,O,Triangle and Square buttons to be connectable to the back paddles? No need for joysticks and touchpad. I skipped every part it said to skip, but still am not sure if I need to use the orange piece, etc for X,O, etc

I really like the fact you can actually have up to 6 remapable buttons on it, for those who know how to mod it. But i am curious as to why 2 of them are unused, I imagine yall couldnt find a good spot for them. I ended up putting the extra 2 in between the bumpers like the razer wolverine controllers.

@ExtremeRate

Жыл бұрын

Yes, we can find a good place for the 5 and 6 buttons. Spot like razer wolverine is good but maybe we are going to use that space for something like trigger stops?

@konishiwoi

Жыл бұрын

@@ExtremeRate I was thinking two extra buttons off to the right of triangle and circle kinda like thosee fighting game controllers but then again the space is quite slim. Or below circle and X maybe..

My left/right arrow is now not working, also the paddles are not working. I did everything as shown in the video, can you please help me?

What are the little 3mm square pads for that were included?

please answer me is this kit only can attach on BDM-030? or i can attach it on another controller?

The blue and white part came out and I can’t get them back in what do I do

i dont need the l3 and r3 do i still Need to glue the ribon cable at the battery because i want to do battery replacements in the Future but if Glue the ribon on the battery i cant replace the battery

The back plate that has the K4 and K3 buttons keep popping off please help .

I just installed this kit. It feelt easy to follow. I have a issue. When I press k1 it also aktivates k3. Any thoughts or solutions?

When I try to remap it and press on the back button it flashes ten stops what should I do?

Hi, I have lately some issues with my remapkit. Somehow whenever I press L3 ( sometimes even when I move the stick around ) the signals from the pedals won't go trough for at least a second. I also noticed that the LED, while remapping, just shut off when I press or move the Left Stick. And the remapping get cancelled. Hopefully someone can help me 🤙

would this still function without the EVA tape or is it important to have it?

@Apex_roberts

3 ай бұрын

Same question here m8

I use these buttons for jump and slide/crouch. Outside the game it works but when I play it doesn’t respond properly.. how can I fix that?

Hey extremerate i just bought a 2 back paddles . The metal ones and i have a question . I see a lot of commens that they are saying they have after 1-2 months problems is it like that ?

Looks like a great product. Is it possible to map 3 buttons to 1 paddle?

Hey could someone please resolve this issue for me, i had first installed the clicky hair trigger bdm 030 and now i installed this rise 4 remap kit plastic version, but it does not turn on i did not do any kind of soldering either, and now also my face buttons sometime don’t work in the game. Please help

Hey I bought the new clicky bottons and the rise 4 kit but the rise kit is not working at all. I returned to Amazon and buy a new one and the same Issue. Should I just ask for my money back or is any issues with the new clicky system nd the rise kit

My main cable doesn’t have the first sticky pad on it, so having trouble keeping it in place. Do I need a replacement or is there a way around this?

@Jaylensity

6 ай бұрын

Same dude

@MrD4nj

5 ай бұрын

They’ve changed how it fits in now (heard back from the seller). You just have to press the holes into the slots where you have added the new foam insert. That will keep it in place 👍

@Jaylensity

5 ай бұрын

@@MrD4nj after days of not fiddling with it, I decided to try again today and I seated the ribbon JUST RIGHT and NOW it all works and I’m so happy😭😭😭

@MrD4nj

5 ай бұрын

Congrats! Yeah I got mine working (second one I’ve had as my first dualsense got horrendous stick drift). Can’t play without back buttons now

Can someone please advise I followed all steps without soldering as I do not want to solder. I use X and O I notice that it’s very different from bdm 020 and 010 that we don’t need any additional ribbons ? As I have followed it the remap goes solid red and then when I do the configure paddle to X it flashes as if it’s done but actually hasn’t done anything

@ExtremeRate

Жыл бұрын

Please connect your controller with an PC and go to extremerate.com/pages/gamepadtester to check if any buttons registered constantly. If so, please re-align the main ribbon cable

Why isn't it working when I have the full clicky kit and this it keeps rapid blinking

Hello, is it possible to use the RISE Kit for the Game “Horizon Forbidden West“? One taste I want use for “R3“. The other taste I want use for “L3“. Weak “L3“ is stimulus-scan. Strong “L3“ is always -scan. The Focus-function.

Extreame rate I have a question ,i did it on the bdm 20 model, the install, Was working fine for weeks until i dropped it on carpet, Now i cant remap my buttons anymore the red light beeps as normal, but all buttons are unassigned now k4 k5 ect Any idea what has gone wrong as i dont no how to remove the kit once assembled sure its a loose ribben but i dont no Ill some it up i can no longer remap buttons although light on back flickers like it should Any ideas 💡??

for some reason when i’m playing and one of my mapped buttons is X for jump, i can’t press L3 for a second or two after using the paddle, can anyone help this?

Hola, se me apaga el mando al conectar el flex izquierdo, el corto, en el modelo BDM-020. Alguna ayuda.

Would I need to solder if I want to remap my L1 and R1 to back paddles

my controller doesnt have the thing on side to plug in its from the ps slim dont know if its different

Anyone know if you can run the led button kit with with button mapping at the same time ?

The light will be solid initially until i put on the back plate (k3 and k4) then it will flash rapidly.

For some reason my suspicion, will the PS5 DualSense controller still dock and charge on official PS5 charging dock? and after installing the eXtremeRate remap buttons. It doesn’t sit on the dock anymore😳😢

Got it to christmas wanted to built it. There was no glue. I tried to fix this and my controller broke, my mic and the feedback are broken and i cant build it like it was before. Now i dont have paddles and dont have a normal controller. Fortunately i have a second controller

The touch on my remote does not work when I press it and it turns on and off only when it wants, after installing the kit, does anyone know what the problem is and how to solve it?

Ummm... at 12:27 mine doesn't have the sticky part, and there was never a white piece of paper to peel off of it.

What do u do when your light flashes rapidly because it goes into remap mode but the buttons don’t work

@Notfakeultra

Жыл бұрын

Pcb is broken

I bought rise 4 metal version for ps5. Bdm020. Now I bought new controller but unfortunately it’s bdm030 model. What should I do. But my rise 4 bdm020 on my new controller or should I have something else?

Put mine together got a flasging red light gone throught it all numeorous time evething is in the right place any idea?

does anyone know where I can take my controller and get this done? I live in NYC Area? I’m trying to be a cool grandma and have this done for my grandson

Been a month with it and now my remote is completely fkddd completely in playable, won’t charge random buttons seem to be pressed can play any game, worked fine until out of no where

Ok...what's the fix if I get the flashing light??

So far love this mod was easy enough to preform although even with the little diagrams to help you figure out which control you have b10-20 etc It still wasn’t easy enough to figure out which one I had until I opened the case so first kit b10/20 had to be returned but once I got the right one went together great just take your time and make sure the buttons move freely. The only issue I have which is negligible is that the controller will no longer fit and charge in the ps5 controller dock anymore so will have to be charged with the usb c cable instead. So keep that in mind when upgrading your controller but in my opinion well worth it to not spend 4x as much on the ps5 edge controller 🤷‍♂️

How do I get the back paddles ti work on a and o for my controller

I don't have Eva tape in the box and one of the buttons are wobbly, what do I do

sucessfully installed mine, here are my tips, becareful when unplugging the ribbon cables sometimes it would unplug on the other side of the cable. get the plastic version, its easier to install compared to the metal, i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. put the extra foam tape cut it in half then stack them together then stick it on top of the orange cable before closing the shell, this would add an extra pressure to make sure that the new ribbon cable makes solid contact to your controller. have fun

@Aaron6791ae

2 ай бұрын

i have the metal and the k3 and k4 sometimes stick when u installed the foam incorrectly and it feels cheap it felt like it just a plastic. Are you referring to 28:40 in the video, I was wondering how these would work/feel without the eva tape.

@LoadingWorks

2 ай бұрын

@@Aaron6791ae it would not work properly without eva tape, what i did was remove the eva tape and replaced it with the thin plastic tape that came with the kit, i wasnt sure what that was for but thats what i used for the k3 and k4, it worked perfectly without sticking the buttons and made it more snappier when pressing the buttons, probably because its plastic and its more harder than foam.

@Aaron6791ae

2 ай бұрын

@@LoadingWorks Thx I will use the tape then was worried that the tape would make them less responsive.

@LoadingWorks

2 ай бұрын

@@Aaron6791ae yeah used the plastic tape, its similar to the eva tape but its a bit thinner and its also pre-cut to small squares same as the eva tape,

@Aaron6791ae

2 ай бұрын

@@LoadingWorks Oh ok I see what your using then not the foam squares, but the hard plastic squares referred to as "pc plates in the updated video 11:30. Under the controller mainboard to make the board more fixed. Unfortunately I only have 4 squares of that left so I won't be able to use that for the k3 and k4 buttons.

Is it necessary to solder something if I don't want the L3 and R3? I want to know how it works on this one because I had the bdm020 and you needed to change two flexes on the sides on this one, isn't it necessary?

@CraigsChannel

Жыл бұрын

You only need to solder when you want either L3 or R3 as back buttons, personally I just use X and O. I've a couple of videos on the 020 if you get stuck

@josemariaruizrodriguez2834

Жыл бұрын

@@CraigsChannel Hello, and if I don't want to map the touch button, is it necessary to solder? Or can I use it originally

@CraigsChannel

Жыл бұрын

@josemariaruizrodriguez2834 if you don't want to have the touchpad, L3 or R3, no soldering. They'll work as normal you just can't have them on the back. I've only ever had X and O as my back buttons

At 10:45* i dont think ur supposed to leave the existing foam tape installed. And perhaps remove it and install one of the new foam tapes. I put in the new foam tape on top of the existing and when I put my controller board back in the new ribbon broke on that side of the board. Sending mine in to get it replaced. Or skip the foam tape completely

where can i find bdm 030 ribbon cables ? i messed up

Can it be used with the Light Version Clicky Hair Trigger Kit?

What are those K5 and K6 soldering spots on the PCB? Is it possible to add 2 more switches?

@ExtremeRate

Жыл бұрын

Yes you can ;)

5:35 i do have the BDM-040 controller, and for some reason, my board looks completely different than in the video :/

Why is my L2 button not working after installing this (I’m not mapping buttons)

So if I wanted to just map the paddles to X and Circle would I just be going straight to the FPC part ? Stick the orange over it and put the controller back together ? I’ve successfully done this with the BDM 020 twice now but recently got a BDM 030 controller seems a hell of a lot easier than all the things you had to replace on the BDM 020, cheers in advance!

@CraigsChannel

11 ай бұрын

I'm guessing so! I've finally got the BDM-030 myself and asked them if they want me to do a video as I've not done any for ages, so hopefully should have one on my channel without the soldering

@Rival-KB

11 ай бұрын

@@CraigsChannel thanks for replying mate! I can confirm that if your only wanting to map the dpad buttons or the x circle triangle square you just go straight the the FPC part literally took me about 3 minutes! Great work on the videos though bro!

@CraigsChannel

11 ай бұрын

@Rival-KB great news then! They're sending me the kit for the BDM-030, so should have that on my channel next week or something. This video on here I just did the commentary for them to help out 😁 Really hope you enjoy the kit, which I'm sure you will

@Rival-KB

11 ай бұрын

@@CraigsChannel aye mate spot on bits of kit for sure!

@CraigsChannel

11 ай бұрын

@Rival-KB are you from Newcastle? With what you just said spot on mate, it has to be Newcastle or Scotland 😄 Not sure if you've had back button in the past, but just stick with them if it's your first time, they take a couple of weeks to get used to