The Dynojet Boost Tube is a high-performance upgrade for the Polaris RZR XP Turbo. Designed to outlive your RZR, its 4-layer reinforced silicone walls can handle the elevated pressures and temperatures that are present in stock or modified trim. When it’s time to relieve the pressure as the throttle closes the included blow-off-valve can be configured to recirculate the air back into the stock plenum or vent it to atmosphere through the included air filter. A provision to re-use the original TMAP sensor is incorporated and constructed of heat-resistant polymer to avoid conductive heat soak into the sensor. Get yours today: www.dynojet.com/charge-tube-f...
The stock charge tube on your Polaris RZR XP Pro wasn’t built to last. We’ve engineered a silicone charge tube (in signature Dynojet red) that improves airflow, while providing cooler charge temps and faster acceleration. Get the most out of your vehicle’s power and ensure it stays leading the pack race after race with a charge tube. Unlike the stock equipment on your Polaris, Dynojet’s charge tube is made from durable silicone that will maintain proper temperatures and handle all the heat you’re putting on the competition.
Get yours today: www.dynojet.com/cold-air-inta...
Tools we recommend:
- 7mm socket
- 11mm socket
- 13mm socket
- 13mm wrench
- Torx 20 socket
- Torx 30 socket
- Silicone spray
- Spring puller tool
0:19 - Benefits of Dynojet's Charge Tube Kit
0:36 - Removal of back panel & exhaust (optional)
1:18 - Removal of clutch vent, loosening up hose clamp
2:10 - Removal of stock tubes
4:01 - Installation of smaller Dynojet tube
5:30 - Installation of large Dynojet tube
7:22 - Installation of blow-off valve
8:15 - Removal of plug/installation of fitting in plenum
9:33 - Installation of vacuum line
Subscribe to our channel: kzread.info...
#Dynojet #Polaris #PolarisRZR