Nice video. Would love to see more about matching eave and gable flashing.

@WesternStatesMetalRoofing

4 жыл бұрын

We have videos that show how to install the eave and the gable flashing including how to cut them so they fit together. Please see links below. Eave: kzread.info/dash/bejne/d3ub1MaCgaazXaw.html Gable: kzread.info/dash/bejne/emup0bCLnpWrebw.html

@francishenry4742

3 жыл бұрын

just ordered the *WoodBlueprints. Com* guide for step-by-step videos and different plans to BUILD A SHED. they have some awesome plans in there

@bernicematthews2016

3 жыл бұрын

Kudos for the video content! Sorry for butting in, I would appreciate your initial thoughts. Have you tried - *WoodBlueprints. Com* It is a great one of a kind guide for building better sheds and woodworking without the normal expense. Ive heard some decent things about it and my cousin finally got astronomical success with it.?

Thank you for your videos! Of what I’ve watched so far, they are very thorough, clear, and informative. I appreciate that they don’t seem to assume significant prior knowledge (not a lot of industry jargon).

Nice information for the roofers are instrusting.

Thanks for sharing very informative idea & techniques.

Can i ask some advice?if I'll use steel trusses and flat bar for fascia board with fascia cover do i need to install eave flashing?can i install gutter and corrugated roof without eaves flashing?thanks in advance and waiting for response

Nice vidio thanks for sharing

Thanks for help

Lean so much here and itsgood

Intro music is cool

Why is eave flashing on top of roof paper instead of under. Also if foam closure strip is sealed with butyl tape how would any water getting under roof get out?

Can we cover the screws with something to prevent leaks?

@WesternStatesMetalRoofing

2 жыл бұрын

Nick, the best way to prevent leaks is too just not over or under tighten the screws. If you have a bad screw you can always replace it with a slightly larger screw. If the screws are fastened correctly, the washers are durable and will last many years. The link below explains the correct way to fasten the metal. kzread.info/dash/bejne/rKR4o8eqoLG2dsY.html

How wide of butyl tape do I use for overlappin and installing foam closure. Also where can I purchase it? A 20 by20 deck roof how long of a roll should I get?

@WesternStatesMetalRoofing

Жыл бұрын

Here is the size, Tape, 3/32"X3/8"X45' Roll. This can be purchased at any roofing supply store such as ABC Roofing Supply.

@hdtripper1

Жыл бұрын

@@WesternStatesMetalRoofing Thanks.

That butyl tape is never in Australia. There for it is not needed!!

Yeah, it is important to get qualified roofers. We are in the middle of roofing and it is apparent that these roofers are not qualified to do the work of putting on a metal roof. Measurements for the roof were off. Every single screw has been over tightened so far. That equals bent metal. The guy we hired seems to have hired this unqualified crew to do the work. He didn’t even show up to supervise them. We just fired them...and now are stuck with an unfinished damaged roof. They weren’t bad at ripping off the old roof, but have left debris of old tar paper surrounding the house. What’s left of our new metal is lying In pieces covering my newly sprouted yard. The metal on the roof, barely screwed down is bent up and doesn’t even fit. It’s a nightmare that my partner doesn’t want to wake up from today!

@WesternStatesMetalRoofing

3 жыл бұрын

I'm sorry to hear about your roofing nightmare. The most important thing you can do is to verify the contractor has installed many previous metal roofs and than check the references. At least you fired them early on. If they have a contractors license, file a grievance against it. It will give you tons of leverage to get your money back. Here's a video that may help other folks out in hiring a qualified contractor. kzread.info/dash/bejne/c2lmo5KodbG2h6w.html

@markrussell9088

Жыл бұрын

I want to see the guy doing the job while he's actually ON the roof, not on the ground!

@barrysmith8193

11 ай бұрын

Are you getting what you paid for? Too many consumers neglect to do their due diligence and have this mindset that all trades are the same in qualification thereby getting the lowest price becomes the most important thing. If you took the lowest price then you are probably getting what you paid for. Trades are not commodities neither are you. The most qualified is the determining factor not the lowest price. Why didn’t you stop them on the first day? They didn’t “all of as sudden” do poor quality work. It started on the first day.

@robertbutler8004

5 ай бұрын

@suziperret did you even check if the guy that quoted you for the job was even qualified in the first place. My guess you did not and accepted the cheapest quote, Buyer be aware.

an Orangutan could do what most of the videos on U-Tube show,, wish I had the cameras and things to show how to do the technical stuff like butting a metal roof up to a wall with vinyl or wood siding or even a concrete block wall. there are all kinds of different flashings that no one shows or even make in front of the cameras. they do roofing in a show room.

@WesternStatesMetalRoofing

3 жыл бұрын

Old Dave, We always appreciate feedback. Have to start at the beginning though before you cover niche installation details. A video like this cost about $1,000 per edited minute, 10K for this one, so it has to have an audience. That being said we are always looking for content partners. Where are you located? Have a video that you suggest that's a tricky install, but not too obscure?

@curtneider8233

2 жыл бұрын

@@WesternStatesMetalRoofing How about how to install a valley that terminates into a field of corrugated metal? Or how to install a transition strip in a field of corrugated metal? (There's a depth differential, so the standing seam and shingles strategies don't work.)

@brettv8

2 жыл бұрын

@@WesternStatesMetalRoofing This video is fine for the average retail DIY rock ape(like me) that's doing a simple install. I learned a bit - and I appreciate it. As for 'old dave' suggesting hard-core roof porn, go for it mate, get up there in most weather conditions and make a free professional video without looking like an orangutang. Anyone that thinks they can do open heart surgery from a youtube video will learn the hard way. Anything more than a lean-to on a garage I would suggest paying someone for their knowledge and getting it right. Good video, thanks from New Zealand.

@johnlockesghost5592

Жыл бұрын

@Old Dave hey man, it's been a year.... You still working on the screenplay?

@olddave4833

Жыл бұрын

@@johnlockesghost5592 yeah, but my contract with MGM will not let me publish it,

Its not metric but a backward metric system. Not use it.

That voice is sooo annoying...

@1960tpk

Жыл бұрын

But, she is a Beautiful woman