This is super cool. I hope there will be a model for hori's fighting edge, as that PCB is rather slow but the stick is one of my favorites.

I needed this video thank you 😊

I upgrade mines using the easy mod PCP works like a champ

and how is this going to work with the hitbox mod for the razer panthera?

I switched the red and green wire in my Panthera so I could use te2 cables instead of the Razer one. If I get the pasta board could I swap the green and red cables to be able to use the te2 cable instead of the Razer one? Anyone know or have any advice?

Is there a way to replace the cable? I want to be able to use a USB-C instead of the proprietary 5 pin.

@qmechanic

Жыл бұрын

I used the EZ Mod kit with the Panthera (designed by Jasen Hicks). Not exactly the same, but it should be similar. I completely screwed up those little USB wires, so I took the whole 5 pin connector out. I installed the Aviator to USB connector kit from Arcade Shock and connected the USB end to the USB port on the Brook Universal Fighting Board. That worked fine and I didn't need to deal with messing up stripping tiny wires. Arcade Shock sells a similar USB-C connector kit. I'm guessing that one would work the same.

Would this work with the razer attrox? Or is the internals noticably different?

@bitbanggaming204

Жыл бұрын

Unfortunately the internals are different. I used this pic as a reference and have confirmed it is NOT compatible. imgur.com/gallery/ttrJrCE

Ez mod is bettee than pasta?

I want EZ Mod for Razer Panthera / pico fighting board

Any chance of getting these in soon I'd like to purchase one

@focusattackcom

Жыл бұрын

We're working to get more units in the next two weeks. BBG had a run on inventory so we're waiting for the shipment.

@andrewlopez7143

Жыл бұрын

@@focusattackcom thanks so much

Will the PS5 brooks upgrade board work with this?

@focusattackcom

Жыл бұрын

Likely, the upgrade board connects to the UFB, which then connects to the PASTA board.

@bitbanggaming204

Жыл бұрын

Yes there is a spot for the upgrade board to be mounted on. The cable is not included in our kit but should be included we the upgrade board. We include the screw as well for mounting.

Narrator sounds like someone who has the the Mission Impossible 64 world record speed run

Are they ever coming back in stock? or are they gone forever, the link in the description is gone 😞

@juglarlocogmail

4 ай бұрын

Same for EZ mod...

Does this work with the atrox if I get a universal fight board?

@focusattackcom

Жыл бұрын

It's designed specifically for the Razer Panthera - sorry!

@donapc7357

Жыл бұрын

@@focusattackcom that suck because I ended up ordering it 🤦🏾‍♂️

@focusattackcom

Жыл бұрын

@@donapc7357 We do have that happen sometimes where a customer asks a question about compatibility after ordering the product. ^_^;; If it hasn't shipped yet, please reach out to orders@focusattack.com

So I don't really get what half of the pro's to using it are, just that it'll allow you to use it on different platforms 😅

So this is for xbox to ps users only?

@focusattackcom

Жыл бұрын

In the video description we mention that the device allows installation of Brook's Universal Fighting Board among other PCBs with similar form factor and pinouts. The UFB works with Xbox, Playstation and other consoles. The PASTA is not an Xbox to PS converter.

Sorry I was hoping for actual pasta

never understood why they used THE THINNEST wires for the usb connector....

@bitbanggaming204

Жыл бұрын

I know right? It's my biggest complaint with OEM sticks.

@bludika

Жыл бұрын

@@bitbanggaming204 yea dude, it's razor thin, really really annoying when putting those wires into the terminals

@qmechanic

Жыл бұрын

I totally messed up trying to strip those thin USB wires. So I ended up removing the entire USB connector and installing the Arcade Shock Aviator to USB connector kit instead. I just plugged the USB connection from the connector kit directly into the Brook Universal Fighting Board.