Had mine installed professionally for $100 - money well spent.

Thanks for this great video. This made up my mind to get one. Headed over to your site, delivery was quick! Thanks again.

Best install video I have seen for Ford F-150 BedRug.

@Realtruck

3 жыл бұрын

Glad it helped!

Fantastically detailed (but not too much!) video. The most helpful I've found anywhere on the internet. Thank you!

I just bought one of there and love it. The floor could be a little more skid resistant though.

This is a awesome video. Thank you very much. I just bought a 2021 f150 and this video helped me with deciding what to buy for my bed

@Realtruck

2 жыл бұрын

Glad we could help!

This was a great instructional video! It helped me out a lot! Much better than the paper instructions provided. Great job!!!

@Realtruck

Жыл бұрын

Glad it helped!

Everyone seems to be afraid to cut out for the lights. I installed one of these in an 18 Raptor and the light cutout is pretty easy to do.

Thanks for the video

Good information

I’m curious why you cut an H for the tie down bracket? Wouldn’t it better to install the tie down bracket directly to the bed and use the H cut for the other piece of the tie down use you can easily attach it? I’m thinking the nuts will get loose if the bed rug is in between the tie down bracket nuts?

I have the 7.2kw Propower on-board. How would i accommodate the electrical outlet panel?

What if a spray on bedliner is already done? Will the adhesive stick for the Velcro?

So can I install just the floor carpet part and add the sides without zippers later? Looks like it is removable due to velcro. :)

What is the number for this model??? I need one for a 2021 Raptor

Hi Great Video, my truck has the 400 watt outlet and lighting, do you use the same method you used for tie downs for them? Or is there another trick that might work for them? Thanks in advance.

@Realtruck

3 жыл бұрын

Hey Gil, yes you would need to make relief cuts for access to the plug. Hope that helps!

@ryanmoyer1

2 жыл бұрын

Hi Gil, I had this same question. Did you end up installing it with the plug and lights? And if so, did you come across any issues?

Hello, my 2022 Ford F150 has the tailgate workstation, would I be successful removing the station and putting the tailgate rug under the station and then resecuring the station to the top of the tailgate rug? I would like to avoid just the bed rug only due to the cut edge snagging on my gear as I load and unload. Thank you, Rich, in Minneapolis, Minnesota.

@Realtruck

Жыл бұрын

We currently only recommend going over the Work Surface or trimming off the tailgate portion of the BedRug, if you plan to use the Work Surface. The main issue I've personally seen is that the Work Surface is plastic, and not rigid enough to lay flat when the bolts are tightened back down. Since the BedRug is cushioned, that also makes it compressible, so the locations with the bolts will draw down further than the rest of areas, making the Work Surface sort of "lumpy". There may be a way to modify things so that it works better, but we haven't found it yet.

What about installing with a sprayed bed liner?

@musicovermyhammond9994

2 ай бұрын

I seen a video on you tube where a guy put it over his spray in bed liner and it was ok

Am I missing something, why are there massive uneven sides? Big ripples like it doesn't sit flush/flat on the bed sides?

@Realtruck

2 жыл бұрын

Hey there, it sits flush against the undulated sides of the bed. Hope that helps!

@travelinman482

11 ай бұрын

​@Realtruck I've never heard of a Bedrug Impact Bed Liner. But I've heard of a Bedrug (Courtesy of Brian Waters Outdoors on YT). Are they the same thing?

1:12 ASMR truck bed edition.

Good product. The only thing is there is no company logo on the bedrug at all. They only have it on the top part of the liner front right. I only have the bed rug it's self (don't need the sidewalls done and there is no company logo. To prove that it is what you paid for.

How do you install the tailgate piece if you have a work surface tail gate?

@Realtruck

2 жыл бұрын

Hey there, it should install the same way. Although, you will have to peel the tailgate portion up when you want to access the work surface. Hope that helps!

Why doesn't anyone show the installation on a truck with a spray in bed liner??

@ICEGOD68

2 жыл бұрын

There’s video on your question. I guess just search bed-rug . It’s a white F150 in the video. Good luck.

@bubba99009

2 жыл бұрын

I saw one where they used some canned stuff called adhesion promoter where the tape attaches to the spray in surface which is supposed to help it stick to the rough surface.

Can this be installed on a bed if it has a spray in bed liner? My liner has a rough surface and not sure if the Velcro tape would stick to it.