Now this guy is very detailed on the installation he explains a word for word what is you do when installing and the window seal I really like that

This video made the job supper easy. The instructions were ok, but the video brought it all together.A good job and thanks.Oh, and the box they came in were just the right thickness to make a few square pieces for putting a little pressure on the tape.

Really good tips for installation...particularly the cardboard "shoehorn" trick!

I agree with every single thing this guy does except keeping your windows closed with the cardboard in them for 72 hours. That’s 48 hours longer then you need. I’ve been installing these for 10 years now and I’ve never heard of anyone leaving them in that long. 24 hours is more then enough time for the adhesive to bind. Besides that excellent video!

@GCharlesE

6 ай бұрын

I'm sure he suggests the 72 hours because that's what AVS recommends in the instructions.

@kregadeth5562

Ай бұрын

@@GCharlesE I watched the AVS installation video. They recommend 24 hours.

Great Video! Was intimidated prior but appreciate your confidence building video! Live Free!

Excellent Video, Thank you I've installed my (AVS 194805) on my 2020 GMC Sierra SLT Crew Cab. The searching I've done, nobody was as precise as your video. Right down to the plastic clip for the rear window. The manufactor's instructions were vague about this clip. When I did my dry fit, I also did as you putting one end into channel then the other then sliding to top without the need to force or bend the visor as i"ve seen so many others do. Unfortunately I received a bad batch. I contacted AVS and after sending pics of the warped vent shades, They are sending me replacements. I got push back for not being able to roll windows up/down for the 72 hours from the wife but I guess these things happen. Thanks again

Very nice, ty for making it look easier than I thought it might be...

this video was awesome helped tremendously

Excellent demonstration 👏🏼👏🏼👏🏼

This was such an awesome video. Thank you

Excellent video! I'm installing these on my 2020 Honda accord today!

@Realtruck

3 жыл бұрын

Right on!

Totally detail oriented. Thanks.

Nice Clear instructions. Well done good sir!

I had to use my dremel to shave some of the plastic off on the inside edge of my back window. Also had to use super glue on the inside edges because the double sided tape would not stick.

Mine come in for my 23 colorado. Cant wait to install then

Thank you great video!!

Thank you, I installed these on my 2020 accord and 3 came off. I'm thinking I didn't abrade well enough and am getting ready to try this again! What should I use to abrade? 3m red scotchbrite?

Again, great tip using cardboard. Thanks for the video, it turned out great on my 2021 Jeep Grand Cherokee.

@Realtruck

3 жыл бұрын

Nice work!

great tips 👍🏻 gracias guero

Super helpful! Thanks!

TY....very helpful

Great tips!

Thank you!

Perfect video

Do these do any better job of cutting down wind noise than the type you attach over the top of the window (attached to the door body above the window)? I don't care about rain, just wind noise. My 02 silverado is extremely annoying at 65mph.

Great vid

I had visors on a previous vehicle. I could the wind noise when driving . Is this because maybe they weren’t installed properly? Thinking about get some on my new vehicle but I don’t want to hear the wind noise.

Thank you! Great jobs.

@Realtruck

3 жыл бұрын

Our pleasure!

Very helpful. Thanks 👍🏻🇺🇸👍🏻

@Realtruck

2 жыл бұрын

Glad to help!

I tried to install these on my 2019 Silverado with the auto-up drivers window. The window won't close because it hits the visor. Any suggestions before I send them back?

this it the only video. Awesome instruction

@Realtruck

2 жыл бұрын

Glad it helped!

What is the rubber that gides the window called

My front window driver side catches the edge of the visor and most times will not let the window roll all the way up unless I guide it using a piece of cart board. How do i fix this problem? My back visor bows Inward to the point where it touches the window. How do I fix that problem also? TAI

Does this in channel visor mess up the channel or window

thank you for the tips!!!!!!

@Realtruck

2 жыл бұрын

Happy to help!

My front windows keep coming down. Also I’m having to hold the visors so the window can go up, I have a 2023 F 150. Also there are no insert pins in my package. I might have to return these.

How do you if it goes in the different spots?

Anyone know what sand paper to get ? I lost the little piece it came with

Perfect 👏🏻👏🏻👏🏻👏🏻

How I do Toyota Highlander 2019 is same process

I found a whole set in the junkyard yesterday, but had no knowledge about the plastic clips for the rear. Do you know of anything I can use in place of those? Thanks in advance..

My front windows didn't come with the adhesive tape

I can't get a match to fit my 99 Crown Victoria I'm desperately trying to find in Channel deflectors. It should be easier than this

Im having difficulty near the mirror area. The space isnt big enough

Do you have a video for the new body style rams? 2022 ram 1500, crew cab, in-channel?

@Realtruck

2 жыл бұрын

Luc, unfortunately not at this time!

Please tell me that all visors have that avs logo. It’s so clean

@DanielOliveira-ow5iv

3 жыл бұрын

They don't, only front windows have the avs logo

For some reason my rear visors bent in toward the window

💪🏼💪🏼👍🏼

DONE! TOO EASY THABKS TO THIS VIDEO! To the guys that couldn't install their - FOLLOW INSTRUCTIONS DIPSTICK!

At least yours came with the adhesive tape on the section that is above the mirror. Mine came with nothing there so it just flaps 😒

i have a 05 gmc canyon extended cab,the rear windows do not go down which kit will work for this model

@Realtruck

2 жыл бұрын

Hey there, this should be the one, realtruck.com/p/avs-in-channel-vent-visors/v/gmc/canyon/2005/. Hope that helps!

How can i remove the the visor?

Is the outdoor temperature very important for longevity? It's about 45 to 60 here.

@DavidKozinski

4 жыл бұрын

I called the factory and they said anything over 60 is good. I've been waiting three weeks here in Cleveland but am doing mine today.

I was wondering when Taking the visors off will it leave adhesive stuck on the inside of the channels? If so would using a heat gun make it easier to take those off?

@joekr_

2 жыл бұрын

It does. I removed some old cracked ones and it ripped the inside rubber with it when I tried to remove it.

@eturnltube

2 жыл бұрын

Was wondering the same... Not a fan of having to use self adhesive tape to fasten these. My old Subaru outback has deflectors (OEM) which clipped into place for cleaner removal.

I’m confused on why somebody would wanna damag weatherstripping by signing it down

Got a video about how to remove these? Thanks!

@Realtruck

Жыл бұрын

Not just yet. Thanks for the video suggestion!

I followed the same steps when installing a set onto my maxima. Three days later I lowered my window and upon raising it again, it caught the vent visor and the visor literally exploded. 🤬🤬🤬

What could be causing my window to bounce back when I use the auto-up button?

@Realtruck

2 жыл бұрын

Hey John, you have to gently "bump" the windows up while pulling the visor away from the door, in order to relieve the pressure off the window as it goes up. Then leave the windows up for a couple days so it can form a memory. Hope that helps!

@joedunmore3007

2 жыл бұрын

@@Realtruck Thanks I'm having the same problem and I installed them yesterday.

do you ever have a problem with them not clearing the window and window doesnt want to roll all the way up. ps I just watched this and left cardboard up. let's see after a few days if the window clears the vent visor. fingers crossed.

@raylegend808

3 жыл бұрын

It’s been a while are you happy with them and do the windows go up without catching?

@sphdg

3 жыл бұрын

@@raylegend808 for the most part I have no trouble. Every now and then one of them will catch. When summer starts Imgonna keep window rolled up and stick it In the sun. Thanks for the reply

So to properly install these I have to scrap the inside of the channel?

@Realtruck

2 жыл бұрын

Hey there! You do have to scuff the surface for proper adhesion but that does not destroy the channel. If you ever decide to remove the visors, it takes some work, but that can also be done without damaging the channel. If you're concerned about it, AVS also makes visors that securely attach to the paint on the outside of the of the channel with 3M automotive grade tape, and they look pretty great too!

How do I take them off

@Realtruck

2 жыл бұрын

Hey there, it depends on the application, but in general, you'd wand to slowly pry the 3M tape away from the channel with a plastic pry tool, while the window is down. Hope that helps!

Who wants tacos ?

I didn't get the clips for the rear windows 😕

@Realtruck

Жыл бұрын

Cruz, we urge you to call our customer service department at 844-671-7904 so we can get replacement clips sent out to you asap!

Now a video how to remove

Just put them on my F150. Used the cardboard trick, left them for over 72 hrs and the window catches on all four on the way up…🤬

Great job, but 72 hours!?

@SuperDval

4 ай бұрын

24 hours is plenty

Oops I didn't use that abrasive pad

@maryoverton1126

3 жыл бұрын

Mine didn't come with any. I had some but didn't use it, I did use the cardboard tip while its curing

72 hours is a long time for a smoker lol