How to Install an Uprated Turbo Recirculation (Recirc) Valve
Автокөліктер мен көлік құралдары
Welcome Bluudies, I have recieved some requests since uploading videos onto youtube, one was fitting a Recirc Valve on a VXR turbo. So this video shows you exactly that.
--------------------------------------------------------------------------------------------------
All your support goes straight back into the channel.
Patreon - / bluudy
--------------------------------------------------------------------------------------------------
Support the Channel; Check out the latest goings on by following instagram/ facebook.
- Bluudys Garage Instagram
/ bluudysgarage
- Bluudy Garage Facebook
/ bluudysgarage
--------------------------------------------------------------------------------------------------
Music in this video by;
No Music
--------------------------------------------------------------------------------------------------
Пікірлер: 48
really good video!
Great job man! And thanks for the shoutout in the video :)
@bluudysgarage
10 жыл бұрын
Your welcome. Sorry it took so long
@callsignshotgun8260
10 жыл бұрын
blame the weather
Thank you
I'm going to attempt this at weekend ha
@bluudysgarage
7 жыл бұрын
Pistol Pete hope you have small hands!
NICE A MORE DETAILED LONGER VIDEO GREAT ;-)
Great video mate I got to do mine on my Nurburgring when it arrives not looking forward to that awkward bolt 🙈
@bluudysgarage
8 жыл бұрын
first 2 boots. .. 1 min.. last one... 30 mins lol
@marcomassimo2759
8 жыл бұрын
+Absolute Modicts haha yeah not looking forward to it buddy 🙈
Hey mate did that valve make any difference to the sound im looking for a blow off valve that i can fit where my oem 1 is on my B207r td04 turbo but want a atmersperic one just for the sound ovs lol
hi i would just like to know when fitting the unrated recirc valve, will this bring up any errors on the dash
what if youve installed the recirc with the flat spot facing 5 o clock? do i need to redo it
If you do not mind, you could make a video to see where a clock for turbo pressure is connected to the engine. I have a zafira a with swap a leh. greetings from Spain, sorry for my misspellings, esyoy using 1 translator
Only time you'll want a shorter shaft. Good video though
Do you know how to install a recirculating valve for a Mitsubishi Evolution 6?
Hello, one question, is that the translator of KZread videos does not make it clear to me what measure of Allen's wrench it takes to unscrew the three screws that hold the recirculation valve, is a measure of 5mm can it be? Greetings!!
Hi guys, i need your help, thing is, that i put on my z20let engine new garett turbo cartridge from z20leh, and after couple months i started to lose boost at 4000rpm, it just lets all the boost out and i can hear recirculating valve opening, mostly on 3rd gear pull. Many mechanics say that its turbo fault, but i think its recirculating valves or actuators fault, what do you think? there are no boost or vacuum leaks, i checked that first
Would putting the bracket on first cause turbo flutter?
Is the 10oclock position the same on a astra gtc vxr ??
anyone fitted a recirc blanking plate and had it run fine?
can you do a video on how to bypass the rear boost control solenide please thanks :)
@callsignshotgun8260
10 жыл бұрын
mrmattyg83 you are best off joining the forum and posting this in the vid suggestion page www.absolutemodicts.com
That's a forge circ right ? , I got the forge circ and forge actuator on mine . Very expensive 🥰
Don't supose you got a video for the rear boost control valve bypass?
@bluudysgarage
9 жыл бұрын
no sorry, but really easy!
what does the recirc valve connect to ?? the hose i mean i seen it going up by where the air filter is ?
@bluudysgarage
6 жыл бұрын
Karl Rees it connects in where the other recirc connects into the vac pipes
@karlfuller6806
6 жыл бұрын
right can't wait to get rid of this turkey noise lmao thanks
is this valve working good? Better than stock one?
@bluudysgarage
4 жыл бұрын
Not had the car for years. But was fine when on.
Did it make any difference with new valve?
@bluudysgarage
10 жыл бұрын
Couldnt say just yet, not gave it much testing, car is off the road till weather picks up.
I just changed mine, only problem i got is when i started it i heard this squealing noise :s, any idea what that could be?
@bluudysgarage
9 жыл бұрын
Any issues, should be directed to our forum. Links in description.
@welshman2011
9 жыл бұрын
Its ok mate, all sorted now
Is this part called bypass?
@bluudysgarage
9 жыл бұрын
no fella, this is a recirc valve. The Bypass is were you remove the plumbing for the rear vaccum box.
@PerformanceY
9 жыл бұрын
Thanks Bluudy. Is it ok to install it to a stock car or do i need to reprogram it or anything?
@bluudysgarage
9 жыл бұрын
nope, you need to reprogram nothing. its absolutely fine. This is ideal ready for a remap. Bluudy
This looked like a piece of cake, so I started it on my Z16LET. Big mistake! No way is this a DIY job on my engine. I cur an allen key down to about 6mm, it may just be possible to remove the bolts, but there is no way the recirc valve can be removed. Requires removing the alloy turbo inlet pipe, which in turn needs a pump (water?) removing. I think it might be an engine out job!!!!
imitando mightycarmods? haha
tip let us no wat the different is
@peternufc1981
7 жыл бұрын
PP van dorst it's an update recirc valve it's better made than the standard as he said they fail and split so the one he fitted doesn't fail or split as he did mention in the video
I fitted one of these. Lesson learned. It failed :( here I'd a video showing how kzread.info/dash/bejne/o3WW2LGbdMSWp5M.html
why not just buy a proper supercar instead of playing around with a Vauxhall...
NICE A MORE DETAILED LONGER VIDEO GREAT ;-)