How to Install an Outdoor GFCI Outlet and Weatherproof Cover
Тәжірибелік нұсқаулар және стиль
NOTE: The cover isn't upside down, it has different ways to feed the cable out, while in the video it shows an opening at the top what I failed to show is that there's a piece that actually covers that up. Holy cow people are eager to jump on that one. Wowie. Okay, now on to the regular description.
Today I'm going to show you how to Install an outdoor GFCI outlet and weatherproof cover. Do you have one of those old-school metal weatherproof covers from the 70s? Well get that (and probably the plug underneath) updated by checking out today's video.
Shopping List
- Cover and GFCI Kit (amzn.to/3zmjLw0)
- Weatherproof Electrical Box (amzn.to/4cGslVr)
- 1/2" Nylon Connector - this is a 10 pack, you don't need this many so just grab one from your home center if you need it (amzn.to/4eKiH5j)
- Silicone Caulk (amzn.to/3VRFljt)
---
Subscribe today (it's FREE) to be notified of future how-to videos!
If you want to learn how to make things, check out my alter ego, @MADEbyAP!
Disclaimer: The product links above are affiliate links, meaning I get a small commission if you purchase from them. Every little bit helps so thank you in advance!
Пікірлер: 12
Never heard of the radio trick…❤
@fixedbyap
23 күн бұрын
Thanks :) It's also a good way to find a breaker when someone doesn't mark them up haha
You got it upside down! Nice video, but the title is missing a 'not'.😂
@fixedbyap
26 күн бұрын
haha, technically it is BUT, there's two "outs" for the cord. One on the top (in my video) and one on the left side, which is the one I'm going to use. What I didn't show is that there's a piece that actually covers up that top opening to keep the water out too. My bad. Haha.
@josephmahoney1015
26 күн бұрын
yep there wasn't much done right here
I want to watch you fumble through installing everything wrong, this is awesome!
@fixedbyap
24 күн бұрын
Please do!
Isn’t the cord opening supposed to be on the bottom?
@fixedbyap
26 күн бұрын
haha, technically it is BUT, there's two "outs" for the cord. One on the top (in my video) and one on the left side, which is the one I'm going to use. Otherwise the cord "out" would be on the right and face the wall, which isn't what I wanted. What I didn't show is that there's a piece that actually covers up that top opening to keep the water out too. My bad. Haha.
You have a portable radio that runs on mains?😂
Wrong connector on rear. That is a cord connector, not a UF connector. Remove the locknut on the correct UF connector to make a watertight seal. GFCI receptacle was not weather resistant. Sticker on the side of it even told you you needed that. Cover was installed upside down. It's going to collect water, not shed it as installed. And seal of side of cover wasn't installed. Not code, but good practice. Install outdoor horizontal outlets hot side up, neutral down. So they won't short out from a bit of inadvertent water intrusion in the box. If you attach the cover with the 4 corner holes, it seals tighter to the box. And Home Depot commercial electric bubble covers are absolute garbage. Lowes carries much better quality TayMac brand for the same money
@fixedbyap
24 күн бұрын
Thanks for the comment! The GFCI clearly says WR which means weather resistant I thought. Or does WR mean something different. It also came with the cover so you’d think that they’d hook you up with the correct items in the kit. Also to the point about the opening on the top, I did fail to add the piece that closes it off keeping the water out. I updated the thumbnail that shows it installed. Maybe down the line I’ll do a follow up. Thanks again for the feedback!