Send this to a friend working on a 65 Impala two door picked up couple months ago thanks great video

Just bought these for my 68 Cutlass restore project. Can't wait to get them in!

@AllThingsCool

4 жыл бұрын

Love mine ended up doing the rear windows too!

This was a great in detail video thanks so much! I'm so new to working on cars now I have to watch a video on how to wire it to the ignition because I have no clue lol

Really helped, I was about to box back up and return! Thank you.

@AllThingsCool

4 жыл бұрын

Glad I could help

Pretty old chevy...cant wait to see it done..i used to have el camino

@AllThingsCool

5 жыл бұрын

Almost there

Thanks for the video this help me so much

@AllThingsCool

4 жыл бұрын

Glad it helped !

Thanks man I’ve watched a bunch of these videos just getting an idea of how to do it but I was racking my brain trying to understand how the door trim went back on because no one showed it. So thank you kind sir for being thorough!

@AllThingsCool

5 жыл бұрын

Glad the video helped !

Great video. 🤙🤙

@AllThingsCool

5 жыл бұрын

Thanks

Thank you

Disregard THE HATING😠!....This video was AWSOME!...It helped me 100%...keep up the good work. I'm building a 69 Mopar and I'm the process of doing the same thing😎👍🏾💪🏾

@AllThingsCool

5 жыл бұрын

Thanks bro appreciate it, just uploaded a reveal video of the 65 impala kzread.info/dash/bejne/qo2Nq9uSdZTco7g.html Check it out !

Cool

that’s awesome, thanks man…

@AllThingsCool

11 ай бұрын

no problem!

I’m trying to use the window crank as the switch instead of the switches provided

good vid very informative.... what did you do to the dash of that poor impala?

@AllThingsCool

4 жыл бұрын

Thanks !!! But if your wondering bout the dash heres a video of finished interior kzread.info/dash/bejne/k3-htsiDfrPbebw.html

i seen that kit but i got the jdm one? it was $60

Looking for a 1956 olds key assembly

Do they have a Kit for a Caprice

Hey Chuck! How’s that kit holding up?? Looking to go either this route or the Nu Relic

@AllThingsCool

6 күн бұрын

@@luisgardea2629 still works well... but keep in mind this isn't a daily driver. so not a ton of wear and tear on it

Do you think you can uprgrsde the window motor to a stock gm one ?

@AllThingsCool

Жыл бұрын

not sure about that one

Do you think rigging up a spring to each side of the glass would take a lot of weight off the window and make them run even smoother?

@AllThingsCool

4 жыл бұрын

Worth a try

Awesome video! Saved me from ripping my hair out with the shit instructions that came with my similar kit. Keep up the good work and screw the 13 thumbs down idiots.

@AllThingsCool

4 жыл бұрын

Thanks !!! And I'm glad it helped !

So on the driver side there’s 2 switches and one of them controls the driver side and the other controlled the passenger side window?

@AllThingsCool

5 жыл бұрын

Yes sir

How do these know when to stop going up/down without breaking the window or causing other damage? Thanks!

@AllThingsCool

3 жыл бұрын

you let go of button it's all manual not automatic

The power cable do you connect it to the battery? Or to a fuse or ignition cable You should've show that

@AllThingsCool

4 жыл бұрын

Always to a fuse box. I ended up modifying the original wiring to run different types of switches so I ran relays for each switch then ran those to a fuse box

@mevorahe

4 жыл бұрын

@@AllThingsCool I also didn't understand the wiring on the ignition box.. the rest is awesome.. good video.. If someone have a link I would appreciate

The brackets seem to be made to mount on the motors on one particular side - looking at the screw points on both parts. You mention the back of the motor at 11min 40sec of the video and talk about why you're mounting it from the 'front' and only using the one screw. It is possible that you mounted the motors on the wrong side of the vehicle - and that if they'd been on the opposite sides then the 'back' would have been the front and you'd have used both screw holes with the bracket hardware. Is there any reason that they have to be installed on one side as opposed to the other?

@AllThingsCool

4 жыл бұрын

No I would still need the motors to drop into the door channel to make room for the flat door panel

Do you have a video of how you did the rear windows? I have a 69 impala and been thinking about doing this.

@AllThingsCool

4 жыл бұрын

Sorry man. I do not have a video on the rear install but it was as easy if not easier then the front

@henrylouie262

4 жыл бұрын

Is it the same kit for quarter windows, as the front? I am worried that it would be too long, the motor unit.

@AllThingsCool

4 жыл бұрын

@@henrylouie262 same kit fits perfect !

How has the durability been? Are you still happy with them? Thanks

@AllThingsCool

4 жыл бұрын

It's not a daily driver so the windows motors arent getting alot of work but the little bit I have used them they work fine

Do these kits last? Or do we have to replace them every some months?

@AllThingsCool

3 ай бұрын

been good for years now but I don't drive my car alot it's a occasional driver when a car show is going on or cruise

@George-yx3ci

3 ай бұрын

@@AllThingsCool well I'm thinking about installing them on my everyday car for the 2 back windows that are manual. One car electrician told me that these kits don't last. That's why I am asking. Thanks for your answer though

Did you also do your rear vent windows?

@AllThingsCool

4 жыл бұрын

Yes with same kit

@69airride3

4 жыл бұрын

So you didn’t use the 4 door kit you used two 2 door kits? If so how did the wiring go. Thanks for the video and your help. If you KZread 1969 Impala restmod that’s my ride and I want to add power windows. Thanks again

Do you have to install relays on this kit?

@AllThingsCool

4 жыл бұрын

I did but I ran different switches also

Its $45 on ebay

In the kit, is there a specified Driver side motor and Passenger side motor?

@AllThingsCool

3 жыл бұрын

no.. not that I seen. you custom mount them for your application

@GlassSandwichTV

3 жыл бұрын

@@AllThingsCool Ok. Also I tried just hooking this up to a battery to test to see if it works, and it does not. I don't know how to get it to work, about ready to give up

@AllThingsCool

3 жыл бұрын

@@GlassSandwichTV that's weird so you tried both and neither worked ?

@GlassSandwichTV

3 жыл бұрын

@@AllThingsCool Yes, I tested it with the passenger button connected only, and 1 motor, connected the red and black wires to the battery and no green switch light or working switch

Do you work on this or you do for fans

@AllThingsCool

2 жыл бұрын

I work on my own stuff

What power source did you use? I’m stuck on that part

@AllThingsCool

2 жыл бұрын

these are ran to an aftermarket fuse box under dash

@Sip28

2 жыл бұрын

@@AllThingsCool which fuse? And it came with an inline fuse 30amp too but I’m stuck trying to find a power source

@AllThingsCool

2 жыл бұрын

@@Sip28 for the final install I didn't use the switches or the in line fuse I used an after market billet window switch and on my after market fuse box it had a spot for accessories so I used that spot for the windows

are you going to do Power Locks? I want to add them to work with the alarm but they want A absurd amount to add power locks I already got the actuators...not the door popper type just the locks like new cars...Its getting closer & closer only problem is the more you sit inside the car while your working on it the more ideas you come up with HA HA

@AllThingsCool

5 жыл бұрын

Doors are shaved so just door poppers for me. Yea the interior is gonna be fun need to start brain storming about center console design,door panels back deck. lot of sitting already getting seats mounted lol

Can this fit in a 1970 chevelle?

@AllThingsCool

3 жыл бұрын

I would thing so

How long has it lasted

@AllThingsCool

5 жыл бұрын

No problems yet installed some for the back windows too

@AllThingsCool

5 жыл бұрын

Will be doing a video on impala soon

@miguelbueno7435

4 жыл бұрын

@@AllThingsCool Are these still holding up?

@AllThingsCool

4 жыл бұрын

@@miguelbueno7435 yup no problems yet. This is a summer car so I do only drive it 4-5 months a year though so not alot of wear and tear just fyi

This might be dumb question but does the motor know when to stop or if you keep hold of the button will grind the gears ? Thanks

@xxxdpgxxxx1389

4 жыл бұрын

TripleSixOne your oem window has a guide and a stop so when you’ve bottomed out it won’t keep turning, so no it won’t mess up the gears

I am so tempted to get this kit for my ranger but the biggest thing that worries me is the plastic gears, and the motors. I keep reading reviews that the motors end up not working after a while because or that the plastic gears that attach to the window crank nub eventually strip out... how have they been now that you've had them for 7 months?

@AllThingsCool

4 жыл бұрын

I felt the same way when I first installed the kit ( worried about the astic gears ) ended up getting a set for the rear windows to haven't had any issues yet. But my cars not a daily driver just weekends so that might help on wear and tear of the kit

you got ripped off! its $70 on amazon for the same kit

@LBbox562

4 жыл бұрын

wow both got ripped off, i got it for $40 on ebay and its the same one lol

@j_t3995

3 жыл бұрын

Lmao I though this was funny

A little slow...

@AllThingsCool

3 жыл бұрын

It is a pretty big window and the tracks are old

Cool