You've explained it as well as the best of them. Thank you for speaking concisely.

Easy to follow along and understand. Thanks for posting these videos.

Bro.. so I was just searching how to hook one of these up.. and sure enough.. u got the same ride.. could t have been better .. good look

Well this helped me out alot cause i just got my 22 this year n haven't installed anything yet scared i was gonna mess up something but thanks bro

@jptheinstallguy

Жыл бұрын

glad the video helped you out

@ericthegeneric1611

4 ай бұрын

22 what

Should've showed how you added the amp. Thats where I'm stuck at on mine.

@thatcrazyclown7784

Ай бұрын

Same here.

Do you have to run both left and right side speaker wires especially if I'm going to be using an eq?

Hopefully you read this, but i used a multimeter on my remote out to turn on my bass amp and its reading under 11 volts. Its recieving 12v too but wont put out the 12v for the amp to turn on, any idea?

I have a 2013 Jetta with the Fender system and sub in the back, I heard I can tap into the Sub line in the trunk is that correct?

Quick question. Why didnt you run the power ground and remote wire from the lc2i to the wire harness connectors from the radio?

Did you have the car running at the final testing when the subwoofer was on?

How do you connect the amp to the lc2i?? Everything else in this video is great info

@aarongood609

27 күн бұрын

you connect the lc2i to the amp using your rca cable just make sure you match up left and right 🔊

Hey I got the factory bose on my 21 denali. I know from.gm they come with added factory subwoofer as an optio.. Would it be best to tap into.the subwoofer signal when using this for subwoofers?

Do you have a speaker installation for this car coming?

What size ferrules did you use

I have a built in flat screen dash stereo. How would I wire this to a factory speaker?

Man. I had a skar evl 12 in an impala with an aftermarket stereo. Traded it in for a Chrysler 300 and used one of these. Now, the amp gets super hot and goes into protect mode all the time. Sounds like crap compared to when it was in the impala. Not near as loud and just totally muddy. Theres gota be another way. Might just go with the Phoenix Tesla screen. Mabe that has an eq rather than just bass, mid, and treble too.

Hey I like your video...I have a question for you...I have a audi s3 2016..can you please help me with the installation of a lc2i and what speaker I can tapping to for signal. Thanks

@Kozibaw

8 күн бұрын

Came here for that Q

Question for you, do you have to run both left and right sides to the lc2 or will one side work? I have already tapped into my left but my sound wasn't the greatest so I bought this to see if it would help. I just don't want to tear apart the right side if I don't have to lol

@jesuslopez5494

Жыл бұрын

I have the same question do you already resolved it or still looking ?

@TJsVette

Жыл бұрын

@Jesus Lopez I ran a jumper wire from the left side to the right side and I didn't really tell a difference. I think I might have to tear out the right side and run a new set of wires. I don't want to but if that is what I need to do then that's what I will do.

@jesuslopez5494

Жыл бұрын

@@TJsVette sounds good and if you do it let me know how it goes so I can do the same thing thanks bro

@TJsVette

Жыл бұрын

@Jesus Lopez I'll try and do it this weekend if I have time lol.

What about remote in?

Can you run power off the amp wires if your putting it in the back ?

@torrez8144

9 ай бұрын

yes for the ground and power you can run the wires from the lc2i to the amp power and ground

If u have 2 amps one for a sub and one for the door speakers I have a matrix and a LCi2 should I buy a LCi7?

@ericthegeneric1611

4 ай бұрын

Do you have factory radio?

Can you use both pairs of RcA outputs at the same exact time? I wanna install door speakers and an amp with my existing 2 channel LOC

@6.4_julian47

3 ай бұрын

I have the same question let me know if you figured it out?

@rudydaberry122

3 ай бұрын

@@6.4_julian47 I’ve called Audio places and they said as long as there’s separate channels you can. Mine says “Main L and R” and “Bass L and R” so I can use both

Which wires did you use from radio to lc2i

@ruthlessflame3309

Жыл бұрын

Did you ever figure this out? Installing an loc soon and need to know what wires to tap

Why cant you just splice in to the rear speakers instead of right behind the head unit? Then you don't have to run wires that far to the LC2i?

@shownlow2

Жыл бұрын

You can

@9THSTREETOG

Жыл бұрын

You can and much easier than running wires through your vehicle

@mikeyis009

Жыл бұрын

Because factory systems turn bass output lower as you turn up the volume. That’s the whole reason the LC2i exists.

@lapoopenstein

Жыл бұрын

@@mikeyis009 you miss the point of the question

@sparten576

Жыл бұрын

if you havent found the answer yet: A lot of factory systems cut bass (completely out) to the rear speakers. Also, getting wires through the door jams or trying to find the corresponding wire elsewhere (not behind the radio) can be a little difficult

I think I'll just pay someone to do this I just don't understand this

How's it going sir I hope you can help me out I have a 2014 Mazda CX 5 with the Bose stereo system I have a subwoofer and built in amp what output converter

@Ricky-ms4fu

6 ай бұрын

Do I need and I wanna upgrade my speakers as well