Our master bathroom has a standing shower with handheld shower head. We started to see some rust spots in the hose not to mention heavy mineral built ups in the shower head because our house has very hard water despite water softener we have. My wife picked out this handheld shower head to replace our old one because she loves the brush nickel finish to match our bathroom decors but this turned out to be very impressive handheld shower head. Although I have replaced shower heads many times in the past, it came with nice instruction on how to replace it for those who's not familiar with it. My only advise would be to use wrench to hold the base spout when removing and installing the holding adapter so you don't accidently twist and damage the base pipe when you over tighten it. I really appreciate that it came with plenty of plumber's tape because you really want to put that on before connecting different parts so that there's no water leak in between threads. This is one of most common mistakes and reasons why there's leak after installing it. Very happy to see that they have provided plumber's tape to remind you to use it! It also had rubber rings/washers in each connector but it also came with extra one, which is nice. They also included a shower drain cover to prevent hair from going in to the drainage, which is a nice bonus. I really love the brush nickel finish, which makes it look elegant and expensive. The 7 different water spray setting is nice to have so you can change it for different purpose. We will most likely leave it on one setting for most of the times but it's nice to have option to change it when needed, such as jet spray for cleaning the shower wall, etc. After replacing the shower head, I didn't see any leak and the stainless steel hose feels sturdy. I also like that I can rotate and tilt the shower head holder and it stays in place. Overall, very happy with this shower head! amzn.to/3gVZIrH

THANK YOU SO MUCH ! I NEED TO INSTALL THE SAME SHOWER HEAD FOR MY GRANDMOTHER IT'S THE SAME EXACT ONE THAT YOU DEMONSTRATED WITH 😊 GOD BLESS YOU AND STAY SAFE. ✝️🙏🏾😊💙

@christopherwade1101

Жыл бұрын

He missed the flow regulator inside the first piece he screwed on If not adjusted pressure can be too high or too low.

@lanakane06

Жыл бұрын

@Christopher Wade THANK YOU, MR.WADE. MY COUSIN ENDED UP INSTALLING IT. SO HE PROBABLY DID WHAT YOU SAID. I TRIED TO GET PREPARED FOR THE INSTALLMENT BUT IT WORKED OUT.SHE LOVES IT. THANKS AGAIN HAVE A BLESSED DAY🙏🏾🩵

Thanks man!

Life saver...I got the same model. The old metal shower head corrode

Thanks for sharing I’ve got the same shower head it was so easy to install didn’t have to call a man 👍🏿👍🏿

Thanks

The model I bought didn’t have gasket or an orange indicator for which was the appropriate end. Both ends looked the same, but I had to turn them around, because the one I first connected to the shower-head leaked a lot. After turning them around and tightening the other one, it all stopped leaking. The WaterPix is not the most attractive hand held showerhead, but it's relatively easy to attach. No pipe tape needed.

@bty8909

2 жыл бұрын

Thanks! Now, how do you TAME the hose?!! The curl in the hose is awkward when the showerhead is in place...

@MacAutomationTips

2 жыл бұрын

@@bty8909 , I just prop the hose on the part where I turn the shower on and off. If you don’t have that, you may have to buy something to hang it to. I agree, it’s hideous just hanging from the shower head.

@fleckx

2 жыл бұрын

@@bty8909 I put a medium Command hook on the wall and just popped the hose into the hook. Cheap and efficient fix.

@dragonfly9143

Жыл бұрын

@@fleckx Is the Command hook still holding on to the shower wall?

Thank u very much

Thank you that was super helpful and made it less scary to install as a gal lol

Is the black clip for mounting the shower head made of metal or plastic

do you have to use pipe tape when installing? our waterpik says that it doesn't recommend using pipe tape but our old shower head had tape so i'm no entirely sure...? thanks in advance!

@WelcometotheFamily1

Жыл бұрын

If there is a gasket that technically should prevent leaks and would then not require thread tape. I put thread tape on all National Pipe Thread Connections as a force of habit.

don't want to buy a new shower head for my new apt. I brought this from my old apt. So the ? is can you add a water filter for hard water? if so how? We have hard water sometimes depends on humidity and I hate the weak shower head the apt bldg provided.

I have this head but it’s seems to make the water cold

kool

Attached mine but no water is coming out what did I do wrong this is the 1st time this has happened

What did you remove from the Hose?

Omg 😊

Do you know how to fix the ball swivle on the top.mine will not tighten

@rich-lf1bm

2 жыл бұрын

Trying tightening the part closer to the wall

What's the part on the wall called

@dianee7778

Жыл бұрын

It’s called the “wall-part thingamajingy”

Why does your head whistle like a drone? Lol

@WelcometotheFamily1

2 жыл бұрын

Changes in flowrate and water pressure can cause the shower head to make a whistle like sound especially when someone else is using water.

@ThatOtaku64

11 ай бұрын

I6

If u look closely in the middle it look like a very small hidden camera lens. Very strange

Instructions reads tape not recommended.

@WelcometotheFamily1

Жыл бұрын

The gasket should be sufficient, but if not tape can help.

I really disliked this shower head. I’m returning it and already installed my delta one

@dragonfly9143

Жыл бұрын

Why did you not like it?

My shower head not working water won’t come out how to fix

@WelcometotheFamily1

8 ай бұрын

Check if anything is blocking the water lines. Rotate the dial to select the type of flow. Also make sure the water is turned on and you may need to pull a lever to direct flow from a tub to the shower. It is hard to diagnosis without seeing the issue.

and it is a piece of Crap also