Cool beans. I just ordered a 12v usb power outlet that also has a cigarette power outlet. I'll use the two USB's to charge my two phones, one for GPS and the other for speedometer/trip counter and use the cigarette power outlet for the mini air compressor I bought. It will all fit nice under the seat.

I would like to thank Virberello for your help so i could install my usb charger. I had no problem installing it thanks to your great teaching. I wish i could get your help in installing my new digital gauges. Dave

@VirberelloScooterTips

3 жыл бұрын

Hello Dave thank you very much for watching my video and be safe

I ordered one yesterday. This video is perfectly timed. Thx mate.

@VirberelloScooterTips

4 жыл бұрын

Hello Floris I love the usb outlet I'm always worry that my cell lose the battery power . Thank you for watching my video

To make the hole use a hole cutting bit, like the ones you use to cut holes for door knobs and lock holes

@VirberelloScooterTips

Ай бұрын

Great idea Thanks

Thanks again my South Florida friend enjoy the video I have a lot of projects and parts but my busy time is through the summer but this video it's going to help me out down the line because that's what I've been wanting to do I got to get through some of my other projects first thanks brother waving my hand from Gainesville you have a good one. And you and your family stay safe down there👍👍

@VirberelloScooterTips

4 жыл бұрын

Hello Andy thank you very much for watching my video one day I will drive up to Gainesville when they reopen Drag racing I love powerful cars for me is better then Disney ah ah ah have a great day my friend and be safe up there

Thank you for all your video I really learned some of it every other day

@VirberelloScooterTips

4 жыл бұрын

Hello Louis Louis thank you for watching my video and be safe

Thank you for a great video! Gonna do it soon on my scooter 🛵

@VirberelloScooterTips

3 жыл бұрын

Hello G Guido I love the usb outlet because I'm always worry for my phone not holding the charge. Thank you for watching my video

Thanks for another fantastic video. A few months ago, you provided a link for the "Voltage Meter" that you installed. I followed the link and found an alternative device from the same company that includes the voltage Meter and USB Charger. It is almost identical to the device in this video. Since my GPS frequently drains it's battery, I connect a cable to the USB Charger which allows me to ride for ever and my GPS stays on.

@VirberelloScooterTips

4 жыл бұрын

Thank you for watching my video

Very useful video. I watch all your videos. Thanks for your tips and tricks.

@VirberelloScooterTips

4 жыл бұрын

Hello Tito0422 thank you for watching my videos & be safe

Mr. Virberello thank you for you easy steps. Now i will order it from your links and putit on. Very easy. Thank you for your safety tips.

@VirberelloScooterTips

2 жыл бұрын

Hello my friend thank you for watching my video

Great video. Love your videos. I've learned so much from your videos!

@VirberelloScooterTips

4 жыл бұрын

Thank you for watching my videos

Very nice way to explain. Thanks

@VirberelloScooterTips

3 жыл бұрын

Hello Ayaz Qais thank you for watching my video

Great video. Very helpfull.

Thank you 👍 very helpful

@VirberelloScooterTips

Жыл бұрын

Thank you for watching my videos

You are awesome thank you for the information you re the best

@VirberelloScooterTips

2 жыл бұрын

Hello my friend thank you for watching my video

thanks just what i needed to learn.

@VirberelloScooterTips

3 жыл бұрын

Hello SYM thank you for watching my video

Awesome video.. what the brother is saying is connect red wire to the Temporary live that cuts off when you switch the scooter off... Great video 📹

@VirberelloScooterTips

2 жыл бұрын

Hello my friend thank you for watching my video

Thank you very much. I have the same charger and will install it on my Yamaha 125 scooter

@VirberelloScooterTips

2 жыл бұрын

Hello Siyu thank you for watching my video

Scooter hasn't even arrived yet and I am thinking of how to do this. Thanks for sharing. I have a crimp tool kit with connectors and will figure out where and how to connect.

@VirberelloScooterTips

3 жыл бұрын

Hello Douglas thank you for watching my video and be safe

Hello my friend ! Always learn something new from your vids. Maybe you can due a vid on upgrading headlights to LED . In the middle of doing a oil cooler for Gy6 . Thanks for sharing 🛵 Salute 👍😎

@VirberelloScooterTips

4 жыл бұрын

Hello my friend the upgrade for the new light is something that I have in mind for few weeks I just try to find the right product and tested my new idea ah ah ah thank you for watching my video

Good job man. I will try to install also a usb charger on my scooter

@VirberelloScooterTips

2 жыл бұрын

Thank you for watching my video

Thanks bruh appreciate the video 2023 May 6 great information

@VirberelloScooterTips

Жыл бұрын

Thank you for watching my video

I watched this video to get an idea on where to pull from acc. thanks. I thought it was funny, that I have the exact same charger except I picked the one with blue numbers. I don't know if I'll actually get speed charging out of it, but that's what it was marketed as. Im more stoked about the voltmeter probably.

@VirberelloScooterTips

4 жыл бұрын

Hello Dylan thank you for watching my video

Thanks great vid, I will solder mines today that wire

@VirberelloScooterTips

3 жыл бұрын

Hello leroy thank you for watching my video

Great 👍 job on the videos

@VirberelloScooterTips

Ай бұрын

Thanks 👍

Complimenti tramite i tuoi suggerimenti riesco a guidare meglio e più sicuro...ciao

Thanks for the video! Grazie

@VirberelloScooterTips

3 жыл бұрын

Hello Shaun Payne Thank you for watching my video and be safe

Your brilliant mate 😂

@VirberelloScooterTips

Жыл бұрын

Thank you for watching my video

Amo Il tuo canale Che mi insegni Cosi tanto. Grazie. Sono regazze Italiane sempre Cosi belle? You are the best

@VirberelloScooterTips

3 жыл бұрын

Grazie Mille per seguirmi sul mio canale le ragazze italiane sono sempre bellissime Ciao and Happy New Year

👍 nice

On additional accesories like that i used an separate battery on side to save energy from my battery

@VirberelloScooterTips

2 жыл бұрын

Great idea

Senior Virberello, I enjoy your presentation. I have a 2003 Honda Silver Wing FSC600D that I bought a week ago. I am hoping you can give me an idea on how I will put a radio FM stereo. I am so thankful any suggestion. Thank you sir.

@VirberelloScooterTips

3 жыл бұрын

Hello this set up on this link is what I like to buy for my scooter amzn.to/2TDy5v9 Bluetooth FM Motorcycle Stereo and the price is good I think the best way will be to have a separate battery

I just ordered one, cant wait to finally charge my phone, and Bluetooth speaker

@VirberelloScooterTips

4 жыл бұрын

Hello TREESGOBOOM thank you for watching my video

@tazz5406

3 жыл бұрын

My 2021 Version comes with one installed right underneath the hook to hang bags in the front. The thing is I can charge my phone even if my 50cc is turned off. I'd woulda love if I can turn the scooter off and also turns off the USB POWER

Nice job 👍

@VirberelloScooterTips

3 жыл бұрын

Hello Michael thank you for watching my video

@michaelcoppola5320

3 жыл бұрын

@@VirberelloScooterTips your welcome I appreciate you sharing your videos very helpful

Make sure to have a clean surface of metal to be your ground

You think this would work on a zuma 125?

I have a 2020 vitacci phantom 150cc. Came with radio and one speaker. How could I add another speaker to it

Mine came with one stock, took it out and replaced it with a voltage meter, never really used it to charge my phone. Great video though!!

@VirberelloScooterTips

4 жыл бұрын

Hello Pinhead Larry thank you for watching my video & be safe

How can do Honda vision 110?

Where are you in Florida!! I'm looking for someone to help me upgrade my scooter

nice, i love v

@VirberelloScooterTips

2 жыл бұрын

Hello my friend thank you for watching my video

Do you have video on how to take out spark plug and which size and how to clean it

@VirberelloScooterTips

2 жыл бұрын

Hello Ryan check this 2 videos kzread.info/dash/bejne/p42K3LuJk6XVaco.html and kzread.info/dash/bejne/Zq6quaOQkaiTicY.html thank you for watching my video

could you do the same thing to install speakers that hook up to a 3.5mm jack or bluetooth? have you ever done a video on installing speakers for listening to music?

@VirberelloScooterTips

3 жыл бұрын

Hello Chris one time I place 2 large marine speaker on my old scooter at the glove box door and a little receiver under my seat but next time I m thinking I need to place the speakers next to the mirror on the handlebar because if the speakers are lower you can not hear much when you ride the scooter and you can connect the speakers in the same place where I connect the usb charger. Thank you for watching my video

@chriskraemer9786

3 жыл бұрын

@@VirberelloScooterTips thank you this will be my next project!

Hello, thanks for video i have question. For kymco xciting is that black wire a same? For all scooters positive line is on black wire?

@VirberelloScooterTips

2 жыл бұрын

Hello Hari not sure on kymco you will need to have a multimeter tester to find the right wire or a wire diaphram

@Mr.MNERIDER

2 жыл бұрын

@@VirberelloScooterTips i have multimeter, how can i do this?

Good video... You keep saying injection instead of ignition key...😊 Otherwise great video...

@VirberelloScooterTips

Жыл бұрын

ah ah ah is my Italian accent thank you for watching my video

@Pavke101

Жыл бұрын

@@VirberelloScooterTips Despite that you actually explain things very good... Even to be carefull around plastic parts... 👍 Thank you for making these videos...

👍

Hey hi watched your video on changing the relay for the blinkers.I did mine but didn’t work do you know what else could be wrong.thank you

@VirberelloScooterTips

2 жыл бұрын

Hello my friend another things I will check should be the blinker switch but the best thing to have is a multimeter to see if your wires have continuity to the blinker and if the new relay is good or not because sometimes I do not trust chinese scooter parts that could be a 5 % possibility that when they get shipped they are already damaged or defensive from the company try to shake the relay and if you ear any sounds like did did relay is not good 👍

@antonioadragna3361

2 жыл бұрын

@@VirberelloScooterTips hey my friend I tried the switch also. Going to try another relay switch. Thank you

I have one like that on my 49cc motor scooter

Hi, will this work for my gy6 50cc? It has a 12v 4A battery, I tried a 12v with 2 usb ports 2.1 amps on each port, but I can’t get it too work

@VirberelloScooterTips

Жыл бұрын

Hello should be working even if the battery is smaller

Do you take a 150 cc seat off like a 50 cc to get to gas tank?

@VirberelloScooterTips

4 жыл бұрын

Hello no to remove the tank in a 150cc is a little longer process you will need to disassemble the all back everything under need your rear rack try to check this kzread.info/dash/bejne/d3ettdayg9TRiKQ.html one of my video at 28 minutes

Hi, just to clarify. After following instructions, will the power to the charger be 'off' when the ignition key is in the off position, even if the charger power button is on?

@VirberelloScooterTips

3 жыл бұрын

Hello Kristal yes when the ignition key is in the off position the usb will be off even if the charger power button is on I like better this way because I trust more the scooter ignition then the little usb on off switch . Thank you for watching my video

@ShortyKRUNK00

3 жыл бұрын

@@VirberelloScooterTips Thanks so much 👍🏽

@ShortyKRUNK00

3 жыл бұрын

I was able to install a charger and have it power to it controlled by the ignition key. THANK YOU!!!!

Do you think the wire colors are the same on a Honda scooter?

@VirberelloScooterTips

3 жыл бұрын

Hello Andy not sure but the green/black is always ground negative , red/yellow is always positive the best way is to have a multimeter and try the wires to see where you can find the wires to connect the usb outlet

My friend I need your help I have a EW mobility 72 scooter I changed this box because my lights were working my horn wasn’t working and some other lights and then when I change it it was working now my USB is not working I don’t know if it’s do USB the wire whatever you think I should splice it read with the other positive wire and black with the other positive And negative with the other wire and see if it works or should I try a test before I do anything else I hope I told you everything’s my friend please I need your help

@VirberelloScooterTips

2 жыл бұрын

Hello my friend the best thing to do is if you have a multimeter try to test the wires voltage that are going to the usb to see if the wire are live so you can find out if is the wires or the usb is bad and then you go from there . Thank you for watching my video

@locascioantonino

2 жыл бұрын

@@VirberelloScooterTips Thank you my friend

@locascioantonino

2 жыл бұрын

I forgot to ask you one more thing if the wire is OK it’s where it’s connected Is the problem can I connect it somewhere else then when I turn the switch with the key thank you again

Hi how are you doing please help me out why do a scooter cutting out well driving and then the battery is flat please help

@VirberelloScooterTips

2 жыл бұрын

Hello Bennie could be a bad stator or bad regulator rectifier that is not recharging the battery

YES! show me HOW HOW HOW!

@VirberelloScooterTips

4 жыл бұрын

Thank you for watching my video

Does the installation of the USB charging station also work for electric scooters?

@VirberelloScooterTips

6 ай бұрын

should be working for that too but could be drain the battery a little

@user-lq7pl5yw8n

6 ай бұрын

Tyvm, just got a scooter and I'm glad to have found your vids

Can i install my radio same way

@VirberelloScooterTips

2 жыл бұрын

Yes you can 👍

Hi how are you doing i have find the problem it is the plug wire

@VirberelloScooterTips

2 жыл бұрын

Hello Bennie niceeee congratulation

I have a qbm. 49 cc it will not stay on cuts off

@VirberelloScooterTips

2 жыл бұрын

Hello JONATHAN OLMOS I do not have much experience on 49cc but to have a running scooter you need fuel , spark and compression so if you don't have one of this 3 in a consistent way your scooter will not run, So ask your self a question : is your fuel getting to your motor or you have a dirty carburetor ? do you have a good spark or you need a new sparkplug ? what is the compression on your scooter ( you will need around 95 to 100 psi to run a 49cc ) ? I hope this can help you and thank you for watching my video

I have a question about my scooter, would like to get your email so I can send you photos?

Does it drain the scooty battery sir?

@VirberelloScooterTips

3 жыл бұрын

Hello my friend if you connect the way I did it will not drain your battery is been working great for me for the next few months . Thank you for watching my video

@syedanaf1996

3 жыл бұрын

@@VirberelloScooterTips thnq somuch sir for the tips

Hi, when I accelerate hard, I hear the scooter pings (spark knock). Can you tell me how can I fix it pls?

@VirberelloScooterTips

2 жыл бұрын

Hello inspect the gap at the spark plug or replace that or find a washer to place at the plug

@jonathanpoulton205

2 жыл бұрын

@@VirberelloScooterTips the gap should be bigger or smaller pls?

@VirberelloScooterTips

2 жыл бұрын

@@jonathanpoulton205 0.27 " or 0.7 mm small but perfect for best performance

@jonathanpoulton205

2 жыл бұрын

Thanks a lot!!👍👍

Whats it called and were to order

@VirberelloScooterTips

2 жыл бұрын

USB Power Outlet amzn.to/2NI5W03

@janeprescott980

Жыл бұрын

Best buy??

Too wordy.

@VirberelloScooterTips

2 жыл бұрын

Hello and thank you for watching my video