How to Install a Steering Wheel!-PROJECT 240SMURRFX(Ep.20)
For this video, we get our steering wheel game on with this obnoxious blue steering wheel from NRG and how to install it! Thanks for watching! Subscribe to my channel!: bit.ly/1FLCPRT
Social stuff, Tshirts, and more below!
My Social Stuff!
Instagram/Twitter-Thatdudeinblue
Like the Facebook!- / thatdudeinblue
Decals and Stickers!- spinnywhoosh.com/thatdudeinblu...
T-Shirts!-thatdudeinblue.spreadshirt.com
Twitch!- / thatdudeinblue
Get some delicious JerkyXP powers here! COUPON CODE- Thatdudeinblue
jerkyxp.com/JerkyTeamMember/16/
Songs used- Not Too Cray(KZread Library)
[DnB] - Pegboard Nerds - Just Like That (Rusko Remix) [Monstercat EP Release]
[Future Bass] - Kasbo - Again [Monstercat Releases]
Outro Song- Lana Del Rey - Ultraviolence (Matstubs Remix)
Пікірлер: 824
To anyone that wants to replace their steering wheel, DISCONNECT THE BATTERY FIRST. Airbags can explode.
@Wolfsgejaule
8 жыл бұрын
!!
@reallunacy
8 жыл бұрын
I want to elaborate. This post isn't to knock David(?), this is for people who are considering doing this on their own car. I don't think that his has an airbag and I know it doesn't have a battery in it already.
@halosoldier4477
8 жыл бұрын
+reallunacy and wait a good 15-20 minutes before messing with it. Some airbags have backup batteries which hold a charge for a few minutes after the battery is disconnected
@R4MP4G3RXD
8 жыл бұрын
+reallunacy Also, be sure to jack up your car! ;)
@brandoGTR48
8 жыл бұрын
+reallunacy no airbags in an s13...
Why am i watching this? i dont even have a car
@namsukeichinose
7 жыл бұрын
Sinkameister LOL
@boto8309
6 жыл бұрын
Same
@helmermagnusson4094
6 жыл бұрын
SZ Media ibjust want to be "preperd". Sorry for bad english
@augustinemilaire7953
5 жыл бұрын
Can’t say the same I gotta learn how to change the steering wheel on my skateboard
@nicocrescenzi8535
5 жыл бұрын
Same
Next time leave the 19mm bolt barely threaded on the end so the steering wheel won't go through your face when you yank it out
@calvin3448
8 жыл бұрын
Ok....
@tangles01
8 жыл бұрын
+Kyle Also tap the end of the bolt (with the nut on the end) with a hammer to shock it loose.
@19Dad84bod
8 жыл бұрын
good advice not being sarcastic
@EdwardAlcala
8 жыл бұрын
I learned that from MCM lol
@radioactiveload
8 жыл бұрын
+EdwardAlcala same
Please take off that bezel, 2001 called and they want it back for their civic.
@andrewklauditz1653
8 жыл бұрын
It looks better in person. Plus it's how the horn is installed. End of the day, his car, his choice in mods
@soccer2000fy
8 жыл бұрын
L
@JtaagHD
8 жыл бұрын
+Ramlee Rudebaugh 65 people agree with me, so in reality you have a bigger L. And for fuck sakes what kind of name is that
@MJLeWiZz
8 жыл бұрын
+Ramlee Rudebaugh 😂😂😂😂
@SIRICKO
8 жыл бұрын
You mean supra LMFAO
That horn button cover is HUUUUGE 😅
So is it supposed to be all wobbly like it was at the end?
@coltonogden1513
8 жыл бұрын
the wobblier the better.
@maxblackoo
8 жыл бұрын
I wonder that to
@Eli9s
8 жыл бұрын
+FlamesfanElite Im guessing it a little wobbly because of the quick release, its not bolted down anymore just snapped in place
@tangles01
8 жыл бұрын
+FlamesfanElite No
@19Dad84bod
8 жыл бұрын
+Colton Ogden why is that?
*PUNCH PUNCH* *PULL PULL* bam steering wheel removal
must be a crip😂
@KPpicturestudios
8 жыл бұрын
Lmaoo
@BeJosephThis
8 жыл бұрын
+CatchUp Niqqaaa thatdudeincrue
@darkslide0909
8 жыл бұрын
+Joseph Montano lmao
@aydenmohammed8404
8 жыл бұрын
+Joseph Montano 😂😂😂😂
@cm392
8 жыл бұрын
+Joseph Montano W
I was gunna say... You forgot to mention the first step to disconnect the battery... Then remembered theres no engine
Can't wait to see this beauty finished
@calvin3448
8 жыл бұрын
Ikr
@Boostedlifestyle
8 жыл бұрын
+Meep episode 49
just came across this channel and watched all 20 episodes in 1 day loving the build david!
@thatdudeinblue This is no joke one of my favorite series on KZread right now! I love to see the car progress plus the video started off with my dream car (300zx) keep up the good work!!
Great video. Something to mention, when removing the original steering wheel leave the nut on so that way when you're initially pulling off the wheel it will prevent it from smacking you in the face.
Man... every time I see one of these videos I can't wait more and more for the smurfsx to be done! I love all your videos David! keep up the awesome work man 👊
The last part he put on ruined the wheel completely why does it stick out so far ruins it
@steffenflindt8670
8 жыл бұрын
Exactly! Cant believe they sell
Doing How To's for the 240, in my opnion, is an awesome idea! Keep em up for all the main mods
Would imo look alot better without the "bezel" like my Momo Monte Carlo.
@muhammadhaziq7849
8 жыл бұрын
true
8 жыл бұрын
+Steffen Flindt And it makes the horn button awkwardly deep.
@muhammadhaziq7849
8 жыл бұрын
i guess he really likes blue like me ;)
Amazing video love it and also love the wheel looks amazing on the car can't wait for the car to be finished!!!
Great tutorial style video David keep up the awesome work like you always do I need to get this steering wheel it needs to be in me life.
Made my night. Totally worth the fight of getting out of bed the upcoming morning
Loved the video!! Keep up the good stuff!
Loving your 240SX so far, it's very tasteful and clean. I feel like clean 240SX's don't exist.
bap bap steering whee; comes off. i literally started craacking the fuck up haha
subscribed because this is my dream car pretty much xD can't wait to see the work on the car
Wheel looks great!
Wait! I'm from the future! Your steering wheel is cheap and you'll have to replace it!
Awesome video......ive always wondered how to install a after market steering wheel. I will be doing this Eclipse GSX this summer
That wheel removal was godlike
Really sick 240sx project bud !
good shit david cangrats on the cars progress
props to the guy who helped you... hes a good friend for only laughing.. its okay Dude in blue we all have those days
"Alright guys so I crashed the 240 cause the steering wheel came off" haha that was pretty wobbly there at the end lol
@NeesanSkyrineR33
8 жыл бұрын
+Kevin R lol. probably the way he was shaking/pulling it earlier to get the other one off... way too much. plus it is a 20+ old car.
is the quick release obligatory , or do you only need the hub ? im afraid if i install the quick release then i will need to " move " my hand to use turning signals ..
david the type a nigga to say hey back at it with another quick video & the vid is like 10 min hahaha love you man keep up the great vids
upload as many 240sx videos as you can at once they're so good.
Normally I don't quite like the thing, that people put a I6 Toyota engine in an Nissan, when they also have an I6, but this just works so well for me. Keep it up David!
@terhowright7762
8 жыл бұрын
And another thing: I've heard that the Kouki/Type-X Taillights middle part's* lock doesn't match the Early Pignose & Chuki/Sharknose 240SX's lock system on the rear. *With the center area I mean the place where the reverse lights are
Snap on tool crew represent! lmao just as much money in tools as was spent in just the steering wheel 😂
Looks great!
I'm looking for a wheel myself for a new Sim racing build, i was just wondering whats the size of this wheel; 350mm (14")? or 380mm (15")?
What are your thoughts on the deep dish wheel over a typical "non-deep" wheel, like a Nardi (not deep corn) or Personal? Just like the look better?
so, how do you use the horn? can you just push on the bezel or do you have to like reach inside the bezel?
Great video man
This is a very good video, good job
lmao you guys are funny man nice video and great help with my build
Gotta ask, why are you using a quick release? As far as i can tell it just causes play in the wheel which would seem like the opposite of what you would want from a nice new wheel
Love your videos
did you use a capacitor to get rid of the srs sign? or do you not care about the srs sign?
Thank you. I actually learned how to do it. Imma use it in future.
where can I get that exact same steering wheel, I found one in amazon but I don't think its deep like this steering wheel.
Me being stupid me as usual hahaha. Had a blast doing another video and hanging out with you before you move bud. I'll see you soon
will the steering wheel be to far away from yourself if you don't install a quick release also?
I like how you say if you can do it anybody can do it
@ThatDudeinBlue
8 жыл бұрын
+ALIGERSLAYER It's true. I'd be a sucky mechanic. Everybody has their strengths and weaknesses!
@EdwardAlcala
8 жыл бұрын
+ThatDudeinBlue you're really not bad man, at least you learn!!
@Boostedlifestyle
8 жыл бұрын
+ALIGERSLAYER sounds like a challenge ...
@davidferrer678
8 жыл бұрын
with the proper tools pretty anyone can if your changing a steering wheel chances are you already have the tools to begin with lol
@frstwhsprs
6 жыл бұрын
Sounds like "Nobody can do it like McDonald's can"
Do you have footage of when you changed the tailights to the type x ones? I have searched in the videos and it seems that it just skips and suddenly new tailights are on. Not that it's important though. I'm just a real fan of those tailights.
Can somebody please help me!! I want to change my steering wheel in my 1988 toyota pickup, do adapters fit on any vehicle? Are the adapter and the aftermarket steering wheel the only thing you need to make sure are comparable?
what drill did you use to get the middle bolt off the steering wheel?
Niiccee! Dude I have that same steering wheel! Except I have it in the suede option with a blue Sparco quick release! 👍👍
1.56 "Dankeschön" 😂 Greetings from Stuttgart/Germany😄
Great seeing you in Atlanta, hopefully we'll meet again soon! There will probably be a squad around you again but KZread famous status problems.
David quick question do they make a horn that actually sits flush in the the ring you put on the steering wheel?
Mighty Car Mods! Yes mate!
do aftermarket wheels come with the hub or do I have to buy that separate?
looks great!
What kind of transmission came with that 2jzgte motor for the 240SX when you picked it up?
can someone help me out I have a s14 and I replace my steering wheel and when I tried to put it back together the steering rod where the 19mm nut attaches to is striped what can I do?
I have a arrow ax9 go kart wheel and I wonder if a could use it in my car.Will it be too weak and break
Hey did you record anything from import alliance. and if so are you gonna post it?
Whats the status on the engine? I know it's not in the car yet but are the turbos on?
Hey David are you keeping the stock seats or getting new ones?
The 240 is coming along great
Good to see your car coming together. You've seem to pass every other project build on KZread ha.
Dankeschön for your Videos ;D greetings from Germany
Yay, more car building simulator!!!
Is aftermarket steering wheel illegal? I head it may be illegal because don`t have airbag, so is or not?
@thatdudeinblue so did this bring the wheel out more??
Hey david what will you do to the build next? Cant wait for more im in love with your 240!
You don't need a quick release to run an aftermarket wheel right?
Do you know what kind of front bumper is on the 300zx?
Ayy Andrew representing the z32 community 👌
Can you not buy the quickrelease and just add the wheel after the hub adapter?
when is the big stuff gunna happen? these video's are like crack, im iching for more ahahah
I always use Blue thread lock on the bolts that go from the steering wheel to the quick release or Boss kit hub, those bolts have a tendency to come loose with time, and it's a good idea to leave the center nut on while trying to remove any steering wheel 👍
Omg dude, I have a vision for a 240SX that's very similar to this. You have awesome taste! The color on mine would be more of like a cobalt blue sort of like the Lexus blue omg it's like the best looking blue ever, but this looks absolutely amazing too! That NRG wheel looks so badass btw. I just got my Nismo 350Z a few months ago and have a long, long ways of fairly expensive payments to make on it so I won't be able to work on a project let alone my baby right now as it is :( BUT at least I can proudly say that I own my dream car :D
Some casual Kasbo in the tutorial. I like that.
+thatdudeinblue where can I get this exact wheel for my s13?
Do you have to get the quick release for the NRG hub? or can you just mount the steering wheel straight on the hub? (I want a new wheel but not the quick release)
@AntonsChanel
7 жыл бұрын
PRjony8 yes you can. Just mount the hub directly to the stearing wheel.
wait so how about the air bag? do u have to take it off??
David what do you think of the nrg wheel? I read that some of the lesser brands steering wheels have a lot of flex in them (at least more than say nardi/sparco/momo etc. ) but do you think they're good enough wheels and recommend them for the price?
@liamjacobclayton-jones2883
8 жыл бұрын
No. Don't compromise safety. It's not worth it.
do you have to get a quick release ?
I'm so happy I saw u at import alliance on sunday
Dope steering wheel. Have thought about starting a project miata for myself...
@lukewallace24v
8 жыл бұрын
Do it!
Hey David sweet wheel install. Have you thought about doing your door panels in blue suede or leather? you should for it will pull the entire inside together
do you need a clockspring for this please reply
Are u getting new racing seats for the 240sx ?
When can we get that motor drop vid??? It feels like I've been waiting forever for this 240 to be built....
i like how other mechanics jus focuses on the part and David just talks to it like a Gentelman
Good video!!!
Thanks for this, I've been curious about how you actually go about installing a wheel
I lold so hard at that removal XP
What if my hub doesn’t have dos 2 sorta screws on the back?
two tips, ive done the steering wheel afew times, you dont need the quick release hub unless you cant get in and out with the steering wheel in place, or you think your car will get stolen and the second thing, leave the bolt on the end of the thread when your taking it off or else you might rearrange your face