Do I have a rekluse? No. Do I plan on getting one? Probably not. Did I watch the video? Yes😊

@rmatvmc

4 жыл бұрын

Thanks for checking out the video!

@Farmtractor

4 жыл бұрын

Same

@airindiana

3 ай бұрын

I’m watching this to learn how to take one off 😂

Great Video! This is why you pay someone to install your Rekluse Clutch.

@bentbarrelballistics6894

Жыл бұрын

Pretty simple install

Excellent video! Great job presenting and the content was edited well. Thank you!

I really want one of these for my yz250. guess I need to save some money, install looked fairly simple.

Nice!

Obviously this guy is a pro mechanic, I will pay the extra bucks to have this installed. Great video thanks for posting!

The music sounds like my dad yelling at me after dropping something on his toe

Charles! I was wondering where you went!

deposit down on a new KTM 500 exc-f $11,600, $1000 Rekluse clutch...yeah I'mma gonna pay the extra couple hun for the install. I'll stick to oil changes and tire spoons.

Se puede instalar en a una Honda XR 200R . Ustedes lo venden ?? Cuanto es el valor del kit .

Question..do this fit with a gpx 250? Just wondering

Can I use this clutch on a Ducati Monster 696?

I'm buying a bike with Rekluse which I have no use for owner doesn't have original parts. Is there anything I need beside clutch plates, springs, cable to restore the bike to standard clutch?

Please apologize my lack of knowledge but I wonder if this is an alternative for the quick shifter that the Adventure Bikes uses or is a different thing?

Buen día, soy de Argentina y tengo un Honda CRF 450 2008, aquí los venden extremadamente caros a esos kit clutch,..Cuánto valen en su país y si hay envíos?

Quale colore di molle usi sul exp disk?

so you install the thing, put oil in it, then check free play in the lever and if theres too much you have to drain the oil and take it all apart again to move that ring a smidge? i dont know if i still wanna get one of these now

@rmatvmc

7 ай бұрын

It's not too big of a job to adjust the free play. You will have to take the clutch cover off but you can just lean your bike over like we did in this video so you don't need to drain the oil.

Hi hoping you can help I'm looking for a auto clutch for my wife's yamaha fazer 1000 she has developed problems with her left hand and can't pull the clutch. I watched your video of the bike with the auto clutch and thought great she can still ride her bike but Rekluse don't list her bike Would it be possible that you would have clutches you could match up with the yamaha so I can get one for the wife There's no one here in the UK that stocks the clutches thanks big Mike

@germanmpower7010

10 ай бұрын

Cambiar la moto por otra que tenga embarque automático de serie amigo..

First👌👌

I recently installed mine and now I have no pressure in my clutch my bike is a 2019 kx250 if that matters

@rmatvmc

Жыл бұрын

Hey, I would re-check the install gap. If that doesn't do it, then let us know. -Charles

What oil do I put in my radius x clutch

@rmatvmc

3 жыл бұрын

This is taken directly from the Rekluse website: "Rekluse clutch systems are designed to work with OEM recommended oils, specifically those that meet JASO MA or MA2 standards. Our in-house oil testing has shown that clutch performance is maximized with oils designed specifically for wet-clutch applications." So, the oil that your bike originally called for will still work great for the RadiusX clutch.

I emailed recluse and they said that the Migura HYMEC clutch didn't work with it. I have the same recluse clutch on my bike but the HYMEC clutch doesn't seem to work. How are you still running the HYMEC clutch with the auto-clutch.

@rmatvmc

2 жыл бұрын

It's been a couple of years since we did that so it's hard to remember exactly what we did. I believe we had a spacer that worked to get the correct free-play. It was definitely a longer spacer. I'll dig into it a little further and let you know. -Charles

@larsonoverby1440

2 жыл бұрын

@@rmatvmc Appreciate it!

@rmatvmc

2 жыл бұрын

@@larsonoverby1440 The owner of the bike hasn't gotten back to me yet, I believe we stacked the two spacers that came in the kit and possibly added a small washer or two until we had the correct play. The plan was to then make one solid piece that was the same length, you might have to have a machine shop make that spacer for you. -Charles

That check bolt has super weak weak weak threads do not over tighten that check Bolt it will strip out your crank case. Guess how I know 😤 freaking used 2002 cr250r past owner that stripped every freaking bolt he touched even the freaking rear axle nut, i mean how do you do that its big like 1 1/8 inch nut

why should you have a rekluse?! :S

@benwan5425

3 жыл бұрын

Hare scrambles and woods riding usually

Nice video! I think you'd enjoy my content too

What a pain in the ass to adjust.

All that work and money just to turn your dirt bike into a moped, then cheat your way through the trails

@Justin-ml8qc

3 жыл бұрын

Works for me, 3 wrist and forearm surgeries with nerve damage. Can't ride past 15mins normally before I can't even pull the lever in anymore. This clutch was a godsend, now I can still ride with my kids.

@marianitosan9759

3 жыл бұрын

Your Reaper In your situation I completely understand. It’s great that you can keep riding thanks to this technology.

@akustaka

3 жыл бұрын

@@marianitosan9759 I'd rather cheat my way through a trail than accidentally drop my bike and bend a handlebar, snap a lever, injure myself, or damage the side of my bike. Not everything has to be a competition, this is a tool just like a phone is a tool to contact your buddy down the road without walking to his house, is using the phone "cheating"? Some people get more enjoyment riding with their friends and family without having to fineness a clutch and that's really all riding it about, is getting outside and enjoying your time there. I bet you're the type of person who tries to make everything a competition... Using such a tool like this in a competitive setting I can understand your "cheating" notion, but then it also comes down to if the racing association hosting that trail event wishes to regulate the use of it.. You can dump a TON of money and time into a bike by buying the most expensive milled aluminum components to drop the weight by 15-30 pounds as well but once again, it comes down to the association hosting the event to determine what they want to classify as the "lightest a bike can be" for their CC classes. Bottom line, don't hate a tool, advancement, or otherwise different method of achieving the same outcome if it is openly available to everyone for a competitive setting.. And shut the hell up if it's not even a competitive setting with people just riding for fun.......

@marianitosan9759

3 жыл бұрын

@@akustaka Since you get personal with me, telling me what kind of person I might be then here is my response to you. If you're afraid of damaging the side of your bike by accidentally dropping it in the trail, then by all means do not ride in the dirt. Dirt bikes are tough. I dropped mine hundreds of times, flipped it, you name it. I replaced almost all the plastics because I've broken them. A dirt bike never last very long looking show room pristine. If you ride it and challenge your self, even a tiny bit, you'll drop it, just a reality of riding dirt trails. Of course if all you do is cruise in first gear through flat hiking trails then you might succeed at never dropping your bike. Of course, buying a Rekluse for that kind of riding it would be a huge waste of money. I recommend you spend your money in some protective gear like riding gloves, boots, etc (from your videos it looks like you ride in shorts and no gloves) before dropping a grand on a recluse though.

@joshb6420

2 жыл бұрын

Isn't riding a motorcycle just cheating our way out of pedaling, which is cheating our way out of walking?