Thanks for providing a no-nonsense instructional video - no timewasting here, straight to the useful content :-)

This is great straight forward instructional video. Perfect. Thank you

Great video - I'll be installing my 1/2" roll in a week or so - you made it look easy.

Yes - 1/4" thickness is good. You can use either plywood or mdf - they both work fine.

We have to start over this cork looks like much higher quality than what we got ours rips easily

Looks awesome

The contact cement is pretty permanent. If you want to be able to remove it, you could adhere the cork to a piece of plywood and then attach the plywood to the wall.

We recommend water-based contact cement. With a concrete wall, however, you need to ensure the wall is as smooth as possible for maximum adhesion. It cannot be raw brick - should be painted first. If you can fasten a plywood backer first and adhere the cork to that, that would be ideal. We'd be happy to discuss this with you in more detail. Please contact our customer support team (the link to our contact information is in the video description) and we can help you out.

which glue will be more effective to stick the cork sheet to the concrete wall

thanks. it is 3/8" 4'x8' roll cork and I want to install a large bulletin board onto a sheetrock wall. I also want to be able to remove it at some point so I'll drive screw to the studs. I was wondering is mdf or plywood sheathing is best - probably only 1/4" is needed. I also will rip the whole affair so it is 2'x8' or 3'x8'.

For the backer board, do you mean the cork or what to adhere the cork to? The thickness and material depends on your application. If you want cork thick enough for pushpins, the cork would need to be 1/4" (6mm) thick. We recommend using water based contact cement. A good brand is 3M. We'd be happy to discuss any questions with you in more detail. Please contact our customer support team (the link to our contact information is in the video description) and we can help you out.

Got any ideas as to how to put it up between the rafter Joyce’s and a basement ceiling I’m leaving the paper backing on because it becomes too fragile without it and I’m gonna try to staple it up but it’s very hard to get the first three Staples on while holding it up yourself

The rolled cork is not waxed so can be stained. We suggest using a water-based wood stain and testing a small piece prior to be sure the color is what you expect.

Is this cork waxed? Interested in staining it darker.

What is the best material and thickness for a backer board? What is the brand name(s) of the contact cement? Thanks for the video.

I'd like to add cork (roll of cork) to my bathroom vanity top. Any ideas , suggestions about how to glue it down and what to use to seal it? thanks

Would you be able to remove it without damaging the wall? Or is the contact cement permanent?

Is it true that Cork roll is good treatment for damp walls?

Great info, thanks! Is it a good sound absorber, please! I have a problem with the noise coming from the neighbours

@JelinekCork

2 жыл бұрын

Cork is a natural insulator against sound so it will help lessen sound transmission. This is one of the many beneficial properties of cork. The thicker the cork, the more it will help (for example, the 1/2" thick wall tiles would be more insulative than the 1/8" thick tiles). There are, however, other variables such as the makeup of the wall that also influence sound transmission. So though it would not stop noise, it would help dampen it. You can find some options for cork wall coverings here: www.corkstore.com/Products/Wall-and-Ceiling-Coverings If you would like to discuss this in greater detail, you can reach us via email cork@jelinek.com or else give us a call. You can find our contact information on our website: www.jelinek.com/contact Thanks!

Im not aure- its it the oitside of the roll thag will face u after u have pasted ot on the wall?

Cork can be used on round walls. If you would like to discuss your application further, please feel free to contact our customer support team (link in video description). We'd be happy to help.

*I heard this is good for sound blocking as a sound barrier some test have proved this theory greatly what is the pricing per foot or roll*

@JelinekCork

5 жыл бұрын

Yes - cork is a natural insulator against sounds. Cork helps lessen sound transmission and the thicker the cork wall tiles, the more it will help (for example, the 1/2" thick wall tiles would be more insulative than the 1/8" thick tiles). There are other variables that influence this as well including the makeup of the wall. If you would like to discuss some options in more detail, please contact our customer service department directly. They will be happy to talk through this with you. You can reach us via email cork@jelinek.com or else give us a call. You can find our contact information on our website: www.jelinek.com/contact-us/ Pricing for our cork wall coverings can be found online: www.corkstore.com/Products/Wall-and-Ceiling-Coverings Thank you!

If there is old paint, does it need to be removed? Is it enough to sand it or some more serious method should be applied? Another question: if there is moist and some mild mould spots in the apartment, is cork a good idea? How to treat those areas in advance and is it possible for the mould to develop further?

@JelinekCork

2 жыл бұрын

When installing cork on a wall, the wall needs to be free of any loose paint so it would be best if its sanded so any loose paint is removed to ensure optimal adhesion. If the wall is damp or there is any moisture, cork should not be applied to the wall. If you have more questions, we'd be happy to discuss this with you in more detail. Please either email us cork@jelinek.com or else give us a call. You can find our contact information on our website: www.jelinek.com/contact-us/ Thank you!

I have a project that requires more than 1 , 4' width of material ,It will need a butted seam. I am wondering if I could apply wallpaper blank stock to the back of the cork with contact adhesive and then install the cork panels with a heavy duty wallcovering adhesive?

@JelinekCork

11 ай бұрын

We do not recommend applying the cork to wallpaper and then wallpaper paste to the wall. We do recommend installing using water-based contact cement to adhere the cork directly to the wall. If you want something less permanent, you can use contact cement to adhere cork to plywood and then screw the plywood to the wall.

Can this be applied to a cabinet (school furniture) and then used as a bulletin board---butcher paper stapled to it and student work stapled/displayed? I have no actual bulletin board and am thinking I could create one.

@JelinekCork

4 жыл бұрын

It can. Keep in mind the contact cement is pretty permanent so if you want to be able to remove the bulletin board from the furniture, you may want to adhere the cork to a piece of plywood first. Also, the cork should be 1/4" thick if you want it thick enough to hold pushpins.

Will this help with soundproofing? that's the reason why I want to put it on the wall.

@JelinekCork

4 жыл бұрын

Cork is a natural insulator and will help lessen sound transmission. The thicker the cork, the more it will help (for example, the 1/2" thick wall tiles would be more insulative than the 1/8" thick tiles). There are other variables that influence this as well including the makeup of the wall. You can find some options for cork wall coverings here: www.corkstore.com/Products/Wall-and-Ceiling-Coverings If you would like to discuss this in greater detail, please contact our customer service department directly. They will be happy to talk with you about this. You can reach us via email cork@jelinek.com or else give us a call. You can find our contact information on our website: www.jelinek.com/contact

@HisaLight2mypath

4 жыл бұрын

@@JelinekCork thank you very much for your reply I appreciate it I will go straight to your website and see.

I want to insulate my truck cap inside ceiling and sides with corkboard rather than insulation. I have a fiberglass truck cap. What can you suggest? Thanks! 😊

@JelinekCork

2 жыл бұрын

You could use a few of types of cork products for this application. Using corkboard material as you mention (such as QuietCork or cork insulation sheets - www.corkstore.com/Products/Cork-Rolls-Sheets ) works for this though could involve lots of cutting and shaping to get it to cover the curves and shapes of the vehicle. Another option is Cork Spray - www.corkstore.com/Products/Cork-Spray . This works well as it hugs the curves/shapes of the vehicle and has a thinner profile with similar insulation values as the cork sheets. If you have additional questions or would like to discuss this further, please either email us cork@jelinek.com or else give us a call. You can find our contact information on our website: www.jelinek.com/contact-us/ Thank you!

I found tiles on sale, 10/$95, but the cement in $212 on your site! What else can be used?

@JelinekCork

4 жыл бұрын

For an application such as this, water-based contact cement is recommended. It creates a strong bond to keep the cork adhered. You should be able to find this at your local hardware store as well.

Can you clarify what kind of primer to use? Thanks!

@JelinekCork

2 жыл бұрын

The primer can be helpful when applying cork to new drywall, it helps ensure the drywall is free of dust and keeps the contact cement from being absorbed. You can, however, also use two coats of water-based contact cement instead - the first to act as the primer and the second coat as the bond coat. If you want to use actual primer, you can use a standard latex paint primer.

We used spray adhesive to use with out outdoor information board, it’s a scout project, unfortunately the roll puckered in spots, what type of adhesive should we use to apply to OSB? Is there a way to fix this?? Thank you

@JelinekCork

4 жыл бұрын

We recommend brushing a water-based contact cement onto both the cork and the substrate (note the substrate must be suitable for outdoor use). After brushing the contact cement onto both surfaces, allow it to dry completely (approx 45 minutes). Once it is dry, carefully position the cork over the substrate and press it tight across the entire surface. Also, the cork board must be protected from rain and elements or it can cause the assembly to fail.

@fousies

4 жыл бұрын

JelinekCork what if we adhered a second layer or cork to the first? What adhesive should we use in this case? Thank-you!

@JelinekCork

4 жыл бұрын

Dena You can do that also using contact cement and brushing it on to both layers of cork, waiting for it to dry (as above) and then bonding the two surfaces. However in order for this to work well it would be important that the first layer of cork is firmly adhered. Any issues with the first layer will telegraph through to the second layer.

What kind of contact cement? Do you have a brand name you can recommend?

@JelinekCork

2 жыл бұрын

Water-based contact cement is recommended. You can find it on our website - www.corkstore.com/Products/Floor-Accessories - or you should be able to find it at your local hardware store as well.

We’ll done

Hello - where did you get/find those large rolls of cork? I only see super thin narrow rolls or 12x12" squares Thx

@JelinekCork

8 жыл бұрын

Large rolls of cork can be found here: www.corkstore.com/Products/Cork-Rolls-Sheets

what is the name of the cement you left that out

@JelinekCork

2 жыл бұрын

We recommend using a water-based contact cement. This is available on our website: www.corkstore.com/Products/Floor-Accessories/Contact-Cement-3M-Green-1-Litre or you should be able to find it at your local hardware store.

Wasn’t entirely clear to me … do you apply the glue to the outside of the roll?. My cork retains the roll memory making it very hard to layout.

@JelinekCork

Жыл бұрын

Both sides of the roll look the same but for easier installation, it is best to use the outside surface. Here is a link to written installation instructions that may be helpful too: www.jelinek.com/s/how-to-install-cork-roll-on-wall.pdf

@alanjacobs7302

Жыл бұрын

@@JelinekCork thanks. Any tips on how to remove the roll memory? I’ve had mine cut to size and stored flat for weeks ( weighted ), but as soon as you release it it just rolls itself up again.

@JelinekCork

Жыл бұрын

@@alanjacobs7302 The rolled cork won't flatten all the way until it is adhered securely with the contact cement. Be sure to follow the manufacturers instructions for the contact cement.

can it be used in round walls?

@mindythomeczek2022

6 жыл бұрын

jadbiz me

Which paste use?

@JelinekCork

3 жыл бұрын

To adhere cork to the wall, we recommend using water-based contact cement. If you have other questions we're happy to discuss with you in more detail. Please contact our customer support team (the link to our contact information is in the video description) and we can help you out.

Dry fitting it first wouldn't be a bad idea....

@xboxgamer120120

5 жыл бұрын

He did in the video.

Actually cork should not be installed to damp walls.