These are going to be super helpful when my build starts! Keep up the awesome work

@SikkyTV

6 жыл бұрын

Great! glad we could help. Thanks for watching!

Just about my lc9 and tr6060 this video is perfect thank you so much

@SikkyTV

5 жыл бұрын

No prob! Thanks for watching

Great video doing this soon so I’m glad I watched

@SikkyTV

5 жыл бұрын

Awesome! Thanks for watching

Thanks for posting this video. I hadn't heard about RTV on the flywheel bolts, but good idea for addressing the potential for oil leaks. I had heard that Loctite is used somewhere in this process but wasn't sure where. Good to know it is on the pressure plate. In some ways, I'm surprised that it is not used on the flywheel install.

@SikkyTV

4 жыл бұрын

Glad to help

Lookin like Thor with that hammer 😂

@SikkyTV

3 жыл бұрын

LOL, yeah I've heard that one before. Thanks for watching!

Coming from ford motors I recently bought an L33 on a pallet and am now trying to put a clutch on it. Do these not have motor plates ???

Putting a 4 speed muncie on a 5.3 do I need different flywheel bolts

I’m doing a ls swap in my 2003 s10 and I’m having issues getting the clutch to work. It has the stock clutch master for 2003 s10 mated to a 1990 c1500 transmission 5 speed with external slave With a load on drivetrain it won’t go in gear or out of gear when in neutral while engine is running it won’t go in gear I don’t want to grind the gears will that master and slave combo work together or do I have other issues?

Thanks for the video! Love the content. Was there no oil or grease on the outside of that pilot bearing before it was pressed in? From the video it looked like it was brake clean, then metal on metal. Thank for the torque spec's and walk through. It might be video editing, but it looked like you skipped some bolts while torque'ing them. Thank for the vid. Can't wait for the next one!

@SikkyTV

6 жыл бұрын

It's a press fit, so no nothing was needed. If you had trouble getting it in you could but as long as it's going in straight it's not needed

Gonna be doing all this on my ls1 soon unfortunately it’s gonna be in the car but shouldn’t be to terrible.

I'm installing a new clutch in my T56 Camaro 4th gen... I use Loctite the red kind on my flywheel bolts I was not told to you silicone will I be okay? I'm all the way to the point to where I've got to adjust 4 the slave cylinder Clarence and I'm hoping that I can figure out how to do it

@SikkyTV

4 жыл бұрын

Yeah the loctite will usually work the same way as long as you use enough

why is the rtv not red?

Do you clean the flywheel flange with any abrasives prior to new flywheel install? If so, what do you use?

@SikkyTV

3 жыл бұрын

you can use anything really. Scotchbrite pad or fine sand paper works.

I got a 5.3/t56 set up currently . I got gifted an ls3 clutch spec stage 2 that was for my friends 2012 camaro , would it fit my set up?

@SikkyTV

4 жыл бұрын

You would need to make sure the throwout bearing assembly has the right clearance to the clutch fingers

If Saul Goodman was a mechanic lol

@SikkyTV

Жыл бұрын

LMAO! going for the flock of seaguls hairstyle! google it if ya don't know lol.

super

@SikkyTV

3 жыл бұрын

Thank you

i was wondering should you use rtv on flywheel bolts or locktight?

@SikkyTV

6 жыл бұрын

I've used both in the past. Honestly either would work good. RTV silicone works at sealing a little better than the locktight though

@jasonbeaulieu4979

5 жыл бұрын

loctite 272

Would locktite 242 work on the pressure plate bolts also?

@SikkyTV

2 жыл бұрын

It would but I wouldn't recommend RED loctite for pressure plate bolts. It can be a pain to remove so maybe Blue is a better choice.

In regards to putting RTV on flywheel bolts: unsure is all LS engines need this, seems like maybe the LS3 and LS7 the crank bolts are not through to the engine? I have the 08 Corvette service manual that calls out to use threadlocker not RTV on the crank bolts to the flywheel. Although I am seeing several LS1 people mention the flywheel bolts can leak oil. If anyone else has insight on this please comment.

@matthewstorm5188

Жыл бұрын

Threadlocker will also seal in oil.

@SikkyTV

Жыл бұрын

yes, correct thread locker will do the trick too

Where did buy fly wheel and clutch?

@SikkyTV

3 жыл бұрын

www.jeimportperformance.com

What type off clutch is that and price?

@SikkyTV

4 жыл бұрын

It’s an Exedy clutch. I believe they are in the $650 range

@laserr10000000

3 жыл бұрын

single mass, dual mass flywheels are more expensive

What’s the torque on the pressure plate?

@stevethedonful

2 жыл бұрын

Did you not watch the video?

@DaDeCodeIsTruth

Күн бұрын

factory is 22 ft lbs...he did like 56.