Wow! This helped by saving me £50 for fitting, I am inept with home DIY but really want to learn, so I watched this awesome and very quick video, followed step by step(new hob so no need for silicone and also plugged into wall socket) and hey presto...I completed it and it works great!🇬🇧🖖😀 THANK YOU

Nice to see Stephen Hawking branching out.

@ianb9729

2 жыл бұрын

I preferred that song he did with Pink Floyd. Less of an edge to his performance here, I've been told that being dead can have that effect on someone.

Thanks for this. Clear, simple and short.

Wowww how terrific, we can ALL be Electricians... Yippeee🤞 Single Ohase/3 Phase, 16/32/49 Amp... Heyy what's the big deal. Just cowboy wire it in to a terminal block and stuff it back through the hole in the cupboard, whack some more Silicone sealant around it and.... Bobs your Uncle, get the Wok on!!! Jeeez some, vids are damn dangerous.!!

Many thanks for this video

Favorite channel

Thank you - that was good to know.

Thank you

Very helpful

I wouldn’t seal the hob using silicone. Just me

@robnic52

7 ай бұрын

What would you seal a hob with, or are we all supposed to guess? :)

@itstherefsfault7083

7 ай бұрын

Wally, just me

@robnic52

7 ай бұрын

@@itstherefsfault7083 Just Me, weird name for a hob to worktop sealing mastic? ;)

Where are the fans the induction stove is supposed to have ?

Waooo, this is amazing technology. Very interesting

Can someone help please. My old 18 year old baumatic ceramic hob is 58 cm. Can i replace with a hisense 59.5 cm. Ordered it thinking they all same.

Put a shirt on. That Gut. Is that Randy from Trailer Park Guys?

The artificial voiceover makes the instructions harder to understand than necessary. A regular voice with tone and inflection would have made this slicker and more professional.

@elingrome5853

Ай бұрын

🤣

Is it a special type of silicon?

Paldies par informaciju 3:42

Am I allowed to wear a shirt?

I can't understand the artificial robotic voice. In fact I hate it.

Hi! is it possible to connect a 3 phase hob to a single phase outlet? is there any risk of overheating or short circuits later on? Sorry I can´t really tell from the video

@evgenshkaruba4166

Жыл бұрын

Yes. This is a very big risk because if you will turned on maximum and installed energy avtomat at 32A and using cables at 2,5mm² (like this video 😢) - this will be fire. Because, you'll using avtomat at 27A (but then you will not using maximum) or upper your cable cross-section to 4mm² or using 3 lines (if you can) You will need using power like can or not turn on hob maximum (why 😊). Instruction for better!

Thats got to be one the most cowboy jobs I have seen on youtube 😮 Using plastic terminal blocks for the connection is shocking and unsafe, should be hard wired into a 45amp outlet that would offer shielding from any spillage from the oven of work surface with the plastic cover... fixing it in with silicone is just "Yeeeehawwww !"..... awful advice for any DIYers and no surprise there's only 278 subscribers to this dangerous channel.. get an electrician in rather than risk this kind of workmanship

Robot voice sucks 🤖

In the UK that wiring would be considered illegal, it is also dangerous. If you cannot do it yourself get a qualified electrician experienced in this type of installation, check their registration and references.

@LK25278

Жыл бұрын

illegal why? common wiring here in Croatia. Among other things, all chandeliers / light fixtures are connect this way - phase + neutral + ground (not always) directly to the wiring in the walls via these clamps shown in the video (not sure how they're called in english exactly)...

@esoxlucius5222

Жыл бұрын

@@LK25278 The connector block is not insulated and it is exposed, presenting the risk of electrocution. UK regulations would not permit that as an acceptable installation. The hob cable would have to connect to the power cable via a purpose made box. Also, the video does not explain how the cable rating/diversity calculations are made. I guess the regulations are less strict in Croatia.

@LK25278

Жыл бұрын

@@esoxlucius5222 No no, im not an electrician or anything like that, so i dont know for sure, and yes obviously i understand that this is all exposed but i didn't realize the video meant to leave it like that, i suppose it did now that i look at it. I thought to myself this would be okay if it was placed in the hole and covered with a plastic cap with a hole in it for the cables to go through (again im not sure how its called in english. How would you go about insulating it?

@esoxlucius5222

Жыл бұрын

@@LK25278 Ok induction hobs are made with various current requirements, cheap versions plug into mains sockets. Those requirement more power require a more specialist installation. You need to determine the current the hob will draw and fit an appropriate breaker to the power distribution unit, you then need to fit the correct size cable and fit a dual pole isolation switch, this requires a cable going to a box, usually sunk in the wall behind the hob. A face plate connector is used to connect the hob cable to the power cable. All safe with no bare conductors. The isolation switch must be sited for easy access but must be a certain distance from the hob (I can't recall right now) Full detail on UK electrician and regulation sites. It may be different in Croatia. A lot of the online KZread videos only tell part of the story. Talk with a skilled electrician to get it right. Take look at this, it is for an oven connection but shows the key components - a hob install would be very similar: kzread.info/dash/bejne/X62hz8l7e8e9mqg.html

This is dog rough for so many reasons!!

Jejej

There is no health and safety as in the film the replacement hob is wired into a an unprotected state and possibly live as nothing was mentioned, for odd job guy doing this at home on his own which is not recommended…

Horrible robot voice. Do we really want to live in a world of machines?