Learn how to install North Shore Commercial Door's brush seal kits efficiently. Our kits streamline the ordering and installation process, providing a durable solution to seal your residential or commercial garage door against weather, dirt, debris, and pests. The polypropylene filaments in the flex brush create a strong barrier, helping regulate temperatures and saving on energy costs. The pre-installed flex brush in the high-strength aluminum retainer, with pre-punched holes every 10 inches, speeds up installation. Each kit includes ample fasteners for installation, with options for various lengths, retainer profiles, types, and brush sizes. Choose between 45-degree profiles for sectional overhead doors and straight profiles for rolling steel or corrugated doors. Slim and standard brush options cover different gap sizes, ranging from 1/2 inch to 3 inches. Kits offer cut-down retainer sections for shipping economy and cater to door sizes from 8 feet by 8 feet to 12 feet by 14 feet.. Purchase a brush seal kit here: www.northshorecommercialdoor....
For more information about our brush seal kits: • Brush Seal Kits from N...
============================= Table of Contents: =============================
0:00 Introduction to brush seals and if they're right for you
1:29 Tips before you order your brush seal kit.
1:43 Tools required for the installation
2:00 Step 1. Measure the top or header of your garage door.
2:08 Step 2. Lay out kit contents end to end. Mark the measurement of the header onto the retainer.
2:16 Step.3 Cut retainer and trim off excess brush to match the measurement.
2:31 Step 4. Install the top retainers with the provided screws from the kit.
2:49 Step 5. Pick a side and measure
2:57 Step 6. Lay out kit contents. Mark the measurement of the chosen side onto the retainer.
3:04 Step 7. Cut retainer and trim off excess brush to match the measurement.
3:14 Step 8. Install the side with the provided screws from the kit.
3:25 Step 9. Measure the final side.
3:35 Step 10. Lay out the last retainers. Mark the measurement of the other side onto the retainer.
3:42 Step 11. Cut retainer and trim off excess brush to match the measurement.
3:49 Step 12. Install the final side with the provided screws from the kit.