Ordered the blue LED switch! thanks

Literally bought a talaria mx4 because of you thanks!!!

@freerfixedit

5 ай бұрын

Love to hear it! Hope you enjoy it! 🤙🏽

Thanks dude. I’m gonna connect that switch to the speed wire so we can have a safe mode and jump into speed mode.

@zack.2

22 күн бұрын

Exactly what I had planned! How’d it go? Did you just remove the connectors and solder it onto the brown wire?

@shockadellick saw your comment. Just want to say thanks! Not sure what happened to it cause it’s gone, but I appreciate it!

Sick!!

Great video. I ordered the surron version of the blinder and switch for my mx4. My mx4 has the more recent connectors (square). Should I be able to just repin the connector on my switch to the square connector that goes into the square connector on the bike? Then just use the same surron connector that's on my binder and switch? Would that work? Or do I need to repin all the connectors to the new square ones?

@freerfixedit

9 ай бұрын

Yeah you can re pin it and there’s a good video of a guy doing it on KZread if you need to check it out. Thanks for the feedback, appreciate it! 🤙🏽

Hey I got my talaria about a week ago and I ordered this and I’m trying to put it on and I’m not seeing the right thing to plug the light into could it be different for later batches?

@Apezilla

Жыл бұрын

are the plugs on your bike not square?

I was planning to find a way to do this after work. guess I don't have to anymore

@freerfixedit

Жыл бұрын

Glad I could help!

I was wondering how to do this... I also don't like the start button... is there a way to bypass it?

@freerfixedit

Жыл бұрын

I've watched a few videos of how to do so, and I'm going to try it and upload my own video next week! Make sure you're subscribed so you stay updated and get notified when the new videos drop! Thanks so much for the support!

Plausible to run it to the brown wire to easily switch modes back and forth from the handlebars?

@freerfixedit

Жыл бұрын

People have tried, but it looks like once you cut the wire there is no going back

@MrGlennFrank

Жыл бұрын

@@freerfixedit Thanks for the quick reply

so this fits the new sting r??? hey also can you show the adjustment on the left fork?? I know it says 10 clicks but luna cycle is trying to tell me that my bike having less than 1 turn is how they are... can you please show us the level of adjustment so I can validate that it has more than one turn of adjustment please?? thanks so much!!

@freerfixedit

Жыл бұрын

Hey, I have a full suspension video on the channel if you want to check that out… you have to check which connector you have for the headlight switch. First batch shipped with oval surron connectors. Newer models are coming with a square connector. Hope this helps!

@bobbybwl

Жыл бұрын

It does not fit the July edition

@freerfixedit

11 ай бұрын

@@bobbybwl So, they haven't started making switches with the square connector yet. What you can do is purchase the square connector here amzn.to/46juEe4 and re-pin the switch to the square connector. Heres a link to a good video showing how to do it kzread.info/dash/bejne/ZXVoprmnfpyyk7w.html Looks pretty simple!

Ok....I hate doing electrical work...how easy is this headlight toggle switch to install and does is turn the tail light off too?

@freerfixedit

11 ай бұрын

No it doesn’t turn off the tail light, just headlight. It’s a pretty simple install. Hardest part is just routing the wires. I saw today too there is a plug and play kit available for the mx4 now it’s the square connector on Amazon. $28 by a company called E-MX

would this also work for a talaria x3 im assuming yes but want to make sure

@freerfixedit

3 ай бұрын

yes just make sure to check which connector you have, earlier talarias were the oval surron style connector you see in this video, theyve since gone to a black square connector for the headlight. check which one you have and order headlights/ headlight switches accordingly!

Nice, ive got the blue switch lol its not too bright tbh :)

@freerfixedit

Жыл бұрын

Good to know! I might switch cause the led does look better

please make a version for xxx

how much longer battery life do you think this will give?

@freerfixedit

Жыл бұрын

Not much. Very little probably. But I just like being able to turn it off and on when I want

@Review-This

7 ай бұрын

Especially went running from the cops at night. Hooked up a kill switch for tail, light/brakelight and headlight.

I got the same headlight switch but with the attached USB charge port, would it be the same setup or have you hooked up a USB port to your Sting yet?

@freerfixedit

Жыл бұрын

I haven’t hooked up a usb port yet. I’m actually kinda mad I didn’t see that lol. I want one now. I’ll check them out. Might be the same process to install, idk what extra the usb will add to the installation though

@billyhendrix

Жыл бұрын

@@freerfixedit I run a Bluetooth speaker when I ride with the kids on their razors so I was using it to power the speaker since it’s strapped down. However there isn’t enough voltage coming out of it to power it so to compensate I hooked up a powder bank to the usb port and plugged in the speaker to the power bank so they both charge off the usb port and it works lol. 🫡🫡🫡

@freerfixedit

Жыл бұрын

@@billyhendrix haha hey if it works it works right? Lol. Good to know though, thanks!

Updated Square connector switch: amzn.to/3rdHNpc Red Toggle Switch: amzn.to/3N0SDHY Blue LED Button Switch: amzn.to/3H2BWIe

Does it work for the tail light too?

@freerfixedit

Жыл бұрын

It can, you’d have to run another switch and lengthen the wires, or splice tail and headlight together maybe

my talaria doesn’t have that plug what do i do?

@freerfixedit

Жыл бұрын

Easiest thing would be cut the headlight off at the bars, cut your new headlight, and wire the 2 wires back together. Until the aftermarket world catches up with the square connector, that’s the easiest route

Does this cut the taillight also or headlight only??

@freerfixedit

Жыл бұрын

Headlight only. I did find the tail light connector under the seat. And it is the same connector. So you could use this for the tail light too, but would have to extend the wire to reach the bars. I’m sure it’d be easier just to spice the tail light and headlight together on one switch 🤷🏻‍♂️

@FreshRides

Жыл бұрын

Same issue here did you cut the oem plug and gritshift plug off and just splice the oem to the gritshift one?

I installed the same switch in my Talaria Sting R MX 4 and it kills power to the entire bike when switched off. Any idea how to fix this?

@freerfixedit

9 ай бұрын

Wrong connection. Also the newer models are shipping with a different square connector. Trace your headlight and check that connection. If it’s a black square connector, there’s links for the updated one in description, and I think gritshift sells an adapter on their site

@agrenoble1

9 ай бұрын

@@freerfixedit Thanks for the reply. The connectors fit properly, but it cut power to the entire bike when switched off. I'll try a different option before digging into the wiring diagram

@freerfixedit

9 ай бұрын

@@agrenoble1 I made the same mistake when I first installed mine. There’s an oval connector in there that will cause this. The correct headlight connection will only control the headlight on off function. Probably a black square connector unless you got a first batch bike. Hope you find it and get it sorted! 🤙🏽

The toggle switch linked does not fit the new talaria sting R mx4. Different plugs

@freerfixedit

Жыл бұрын

This is the 2nd case of this I’ve heard. Someone else in a fb group claimed this and had a square plug. This switch worked for my bike and I have an R mx4. I guess they are shipping with different headlight connectors on some models? Bizzare

@FreshRides

Жыл бұрын

Same issue here mines a square black plug and doesn’t fit the oval one

@freerfixedit

Жыл бұрын

@@FreshRides I found the name of the square connector if you’d want to splice it into the headlight. Hang on I’ll find the name and link…

@freerfixedit

Жыл бұрын

@@FreshRides amzn.to/3BkdUoX furukawa Fw-c-4f-b (female) and Fw-c-4m-b (male) is the name of the square connectors

@justinmorales4201

Жыл бұрын

@@freerfixedit Same mine comes w a square one, kept coming back to this vid too see if i was doing something wrong!

This does not fit new 2023 Talaria Sting R Mx4. It has different plugs

@freerfixedit

Жыл бұрын

Some are shipping with the oval surron connectors you see in the video. Some are also shipping with a square connector unfortunately. Wasn’t aware of this before making the video. Make sure you check for which connector you have before ordering!

@handellopezz

9 ай бұрын

Exactly I have the same problem right now and I don’t know how to fix it

Bro i have watched this vid multiple times and i cannot find the right wire to install the switch, the actual light wire, then connections do not match up.

@freerfixedit

Жыл бұрын

So unfortunately… some bikes are shipping with a black square connector, and I’ve seen videos of peoples bikes with no connector for the headlight at all. Just straight wired in. If you have the square connector, someone just put out a really good how to video on replacing the connections of the switch to square. Really easy. I’ll try to find the link for you

@freerfixedit

Жыл бұрын

kzread.info/dash/bejne/ZXVoprmnfpyyk7w.html

Does this modification also turn off the taillight?

@freerfixedit

10 ай бұрын

No, there’s another connection under the seat for the tail light. Also, newer stings are shipping with a different square connector now. Make sure you check which connector your bike has before ordering. They make a square version now as well on Amazon by emx, and also I’m hearing gritshift sells and adapter on their site

This mod does not fit the July2023 Talarias. Just FYI.

@freerfixedit

11 ай бұрын

Yeah they started shipping them with a different square connector. There’s a good video on KZread of a guy showing how to re pin the switch with the square harness. Looks simple

First

@freerfixedit

Жыл бұрын

You’re actually the first “first” 😂 congrats 🥇